EQ6 moving in an unusual way
- Jeffrsharpe
- Earth Ambassador
- Articles: 0
- Posts: 1
- Joined: Mon May 11, 2020 12:15 pm
- 3
- Location: England ST73PF
- Status:
Offline
EQ6 moving in an unusual way
Hi, just joined to see if anyone can help with my EQ6 mount.
I have EQ6 with skywatcher ED80 and Williams optics star 70 piggy backed, two cameras and an off axis guided. I am relatively new to this game, retired so am able to try to learn fast? There seems to be an unusual motion when I try to slew. Best to explain it this way. I have a light panel fitted to the wall of my observatory. I can and have set the park coordinates to that light panel position and the mount will go there after some unusual motion. As an example of the behaviour....Say I drive through EQMOD the mount about -5 degrees off the light panel in azimuth and then say park to the light panel. I would expect the mount to simply return by 5 degrees to the light panel. What it does is move away even further say about to about -25 to -40 degrees or more, then stops momentarily, thinks about what it has done and needs to do then returns correctly to the light panel. Is this normal behaviour? Presumably not...so how can I stop this peculiar motion. Any ideas would be welcome.
I have EQ6 with skywatcher ED80 and Williams optics star 70 piggy backed, two cameras and an off axis guided. I am relatively new to this game, retired so am able to try to learn fast? There seems to be an unusual motion when I try to slew. Best to explain it this way. I have a light panel fitted to the wall of my observatory. I can and have set the park coordinates to that light panel position and the mount will go there after some unusual motion. As an example of the behaviour....Say I drive through EQMOD the mount about -5 degrees off the light panel in azimuth and then say park to the light panel. I would expect the mount to simply return by 5 degrees to the light panel. What it does is move away even further say about to about -25 to -40 degrees or more, then stops momentarily, thinks about what it has done and needs to do then returns correctly to the light panel. Is this normal behaviour? Presumably not...so how can I stop this peculiar motion. Any ideas would be welcome.
- helicon
- Co-Administrator
- Articles: 592
- Posts: 12377
- Joined: Mon May 06, 2019 1:35 pm
- 4
- Location: Washington
- Status:
Online
-
TSS Awards Badges
Re: EQ6 moving in an unusual way
Hi Jeff and Welcome to the Forums!! Thanks for joining. Not sure about your question, I'm sure folks will be along who can answer.
-Michael
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
- Makuser
- In Memory
- Articles: 0
- Posts: 6394
- Joined: Mon May 06, 2019 12:53 am
- 4
- Location: Rockledge, FL.
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: EQ6 moving in an unusual way
Hi Jeff. I moved your post to this forum that has many users of this brand of mounts, and where you should receive some excellent help soon. You can make a new post in the general welcomes forum again. I hope this helps Jeff, and a big welcome to the forum.
Marshall
Sky-Watcher 90mm f/13.8 Maksutov-Cassegrain on motorized Multimount
Orion Astroview 120ST f/5 Refractor on EQ3 mount
Celestron Comet Catcher 140mm f/3.64 Schmidt-Newtonian on alt-az mount
Celestron Omni XLT150R f/5 Refractor on CG4 mount with dual axis drives.
Orion 180mm f/15 Maksutov-Cassegrain on CG5-GT Goto mount.
Orion XT12i 12" f/4.9 Dobsonian Intelliscope.
Kamakura 7x35 Binoculars and Celestron SkyMaster 15x70 Binoculars. ZWO ASI 120MC camera.
>)))))*>
Sky-Watcher 90mm f/13.8 Maksutov-Cassegrain on motorized Multimount
Orion Astroview 120ST f/5 Refractor on EQ3 mount
Celestron Comet Catcher 140mm f/3.64 Schmidt-Newtonian on alt-az mount
Celestron Omni XLT150R f/5 Refractor on CG4 mount with dual axis drives.
Orion 180mm f/15 Maksutov-Cassegrain on CG5-GT Goto mount.
Orion XT12i 12" f/4.9 Dobsonian Intelliscope.
Kamakura 7x35 Binoculars and Celestron SkyMaster 15x70 Binoculars. ZWO ASI 120MC camera.
>)))))*>
- KathyNS
- Co-Administrator
- Articles: 0
- Posts: 2616
- Joined: Thu Apr 25, 2019 11:47 am
- 5
- Location: Nova Scotia
- Status:
Online
-
TSS Photo of the Day
TSS Awards Badges
Re: EQ6 moving in an unusual way
Is it perhaps doing a meridian flip to get there?
DSO AP: Orion 200mm f/4 Newtonian Astrograph; ATIK 383L+; EFW2 filter wheel; Astrodon Ha,Oiii,LRGB filters; KWIQ/QHY5 guide scope; Planetary AP: Celestron C-11; ZWO ASI120MC; Portable: Celestron C-8 on HEQ5 pro; C-90 on wedge; 20x80 binos; Etc: Canon 350D; Various EPs, etc. Obs: 8' Exploradome; iOptron CEM60 (pier); Helena Observatory (H2O) Astrobin
- UlteriorModem
- Local Group Ambassador
- Articles: 0
- Posts: 2112
- Joined: Sat May 11, 2019 1:32 am
- 4
- Location: Florida
- Status:
Offline
-
TSS Photo of the Day
Re: EQ6 moving in an unusual way
Is this a new mount or was it purchased used?
It might be that the mount is moving to try to take out any backlash and 'approaching' the target from the preferred direction?
I dont have an EQ6 but my CGX when first started up and moves to it's 'switch' position goes past it a little bit then backs up to the right position. It also has a 'preferred' approach direction.
Since they use the same Nexstar hand controller this 'may' be the case. Might want to check the 'anti backlash' settings.
If it is centering targets, and tracking well I would not worry about it.
If it becomes problematic, and the mount was 'used' may want to set the hand controller back to factory defaults and start from scratch.
It might be that the mount is moving to try to take out any backlash and 'approaching' the target from the preferred direction?
I dont have an EQ6 but my CGX when first started up and moves to it's 'switch' position goes past it a little bit then backs up to the right position. It also has a 'preferred' approach direction.
Since they use the same Nexstar hand controller this 'may' be the case. Might want to check the 'anti backlash' settings.
If it is centering targets, and tracking well I would not worry about it.
If it becomes problematic, and the mount was 'used' may want to set the hand controller back to factory defaults and start from scratch.
Tom
Current Equipment:
Mount: Celestron CGX-L
Scope: 130mm f7 APO
Cam: ASI071mc-pro
Current Equipment:
Mount: Celestron CGX-L
Scope: 130mm f7 APO
Cam: ASI071mc-pro
- yobbo89
- Moderator
- Articles: 0
- Posts: 2599
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: EQ6 moving in an unusual way
Sounds like software issue, conflict, being forced to do a meridian flip or something, mount slew limits ectt. How is the mount connected? Hand controler? Direct? What planetarium software are you using?
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute