Need help setting up Celestron 127EQ with missing parts
- RamJacCorp
- Articles: 0
- Posts: 2
- Joined: Tue Mar 12, 2024 12:26 am
- Location: Philly
- Status:
Offline
Need help setting up Celestron 127EQ with missing parts
- Bigzmey Online
- Moderator
- Articles: 8
- Posts: 7751
- Joined: Sat May 11, 2019 7:55 pm
- 5
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: Need help setting up Celestron 127EQ with missing parts
viewtopic.php?f=4&t=5803
So, there is a good reason why the mount alone costs almost as much as the complete package. This is because the scope has very little value.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3122 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2196, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
- Lady Fraktor
- Articles: 0
- Posts: 10035
- Joined: Mon Apr 29, 2019 9:14 pm
- 5
- Location: Slovakia
- Status:
Offline
Re: Need help setting up Celestron 127EQ with missing parts
If you have a set of binoculars they will give you better views and some nice close up views of the lunar surface.
To mount it on your tripod you could modify the top and use some wood and two large Jubilee clips to hold the tube in place though there is no guarantee this would work without seeing the tripod head.
Good luck and hopefully you can get a better telescope that will not frustrate you to the point of giving up on this great hobby.
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1000101)
The only culture I have is from yogurt
- JayTee
- Articles: 2
- Posts: 5651
- Joined: Thu Apr 25, 2019 3:23 am
- 5
- Location: Idaho, USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Need help setting up Celestron 127EQ with missing parts
When I need used parts I have found there are several places you can go, like the Astro classifieds at Cloudy Nights and Astromart, and don't forget about ebay. I have gotten a lot of good usable equipment off of ebay. You are looking for a Celestron setup with an SLT go to mount. This is one of a couple of different paths you could choose to use your telescope tube.
Cheers,
JT
∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO
∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5
∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros.
∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3
∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter
∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
- OzEclipse Online
- Moderator
- Articles: 2
- Posts: 2429
- Joined: Sat May 11, 2019 8:11 am
- 5
- Location: Young, NSW, Australia, 34S, 148E
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
Re: Need help setting up Celestron 127EQ with missing parts
Joe
Amateur astronomer since 1978...................Web site : http://joe-cali.com/
Scopes: ATM 18" Dob, Vixen VC200L, ATM 6"f7, Stellarvue 102ED, Saxon ED80, WO M70 ED, Orion 102 Maksutov, ST80.
Mounts: Takahashi EM-200, iOptron iEQ45, Push dobsonian with Nexus DSC, three homemade EQ's.
Eyepieces: TV Naglers 31, 17, 12, 7; Denkmeier D21 & D14; Pentax XW10, XW5, Unitron 40mm Kellner, Meade Or 25,12
Cameras : Pentax K1, K5, K01, K10D / VIDEO CAMS : TacosBD, Lihmsec.
Cam/guider/controllers: Lacerta MGEN 3, SW Synguider, Simulation Curriculum SkyFi 3+Sky safari
Memberships Astronomical Association of Queensland; RASNZ Occultations Section; Single Exposure Milky Way Facebook Group (Moderator) (12k members), The Sky Searchers (moderator)
- Richard
- Articles: 0
- Posts: 1167
- Joined: Mon May 13, 2019 6:55 am
- 5
- Location: South Africa/Czech Rep
- Status:
Offline
Re: Need help setting up Celestron 127EQ with missing parts
You could perhaps mount to a camera tripod with some mods , but it will not be stable and will frustrate you , it will shake like crazy and with no slow motion controls its a no no
Unfortunately the telescope (
The only option if you are handy man is to build a Dobs mount for it which is a lot of work so unless you test it first then no
Refractors None
SCT C5 on a SLT mount
Mak 150 Bosma on a EQ5
- Graeme1858 Online
- Co-Administrator
- Articles: 1
- Posts: 7532
- Joined: Mon Jun 24, 2019 7:16 pm
- 4
- Location: North Kent, UK
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
I Broke The Forum.
Re: Need help setting up Celestron 127EQ with missing parts
RamJacCorp wrote: ↑Tue Mar 12, 2024 12:54 am I just received a used Celestron 127EQ, and am extremely excited.
My first telescope was a 127
I'm with Richard, If you have had a look through it and it's half decent, build a Dobsonian mount and see if you too get hooked and want to take the hobby further.
Good luck, let us know how you get on.
Welcome to the forum.
Regards
Graeme
Celestron 9.25 f10 SCT, f6.3FR, CGX mount.
ASI1600MM Pro, ASI294MC Pro, ASI224MC
ZWO EFW, ZWO OAG, ASI220MM Mini.
APM 11x70 ED APO Binoculars.
https://www.averywayobservatory.co.uk/
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute