Frankly, I think the result speaks for itself.
A quick Compare of the new BlurXterminator AI
- Jockinireland
- Milky Way Ambassador
- Articles: 0
- Posts: 1929
- Joined: Sat Aug 24, 2019 7:56 pm
- 4
- Location: Galway
- Status:
Offline
-
TSS Photo of the Day
A quick Compare of the new BlurXterminator AI
This is a quick and comparison of a deep crop of a raw (left) BXT AI2 (Middle) and BXT AI4 output from my NGC7331 image posted on the DSO forum.
Frankly, I think the result speaks for itself.
Frankly, I think the result speaks for itself.
Scope: Skywatcher Evostar 80ED (SW 0.85 FR/FF) on a SW NEQ6Pro
Guiding; SW Evoguide 50ED, ASI 120mm mini
Meade 8" LX200 GPS on wedge (Guided with a cheapo 50mm guidescope and a ZWO ASI 120mm mini)
Sharpstar 61EDPH II (with dedicated 0.8 reducer) with wiliam Optics 32mm uniguide
Camera: ASI2600MC pro. QHY 163M with ZWO 7nm NB filters, Canon EOS700D astro mod
Secondary mount: Skywatcher StarAdventurer
My Astrobin https://www.astrobin.com/users/mackiedlm/
Guiding; SW Evoguide 50ED, ASI 120mm mini
Meade 8" LX200 GPS on wedge (Guided with a cheapo 50mm guidescope and a ZWO ASI 120mm mini)
Sharpstar 61EDPH II (with dedicated 0.8 reducer) with wiliam Optics 32mm uniguide
Camera: ASI2600MC pro. QHY 163M with ZWO 7nm NB filters, Canon EOS700D astro mod
Secondary mount: Skywatcher StarAdventurer
My Astrobin https://www.astrobin.com/users/mackiedlm/
- Juno16
- Universal Ambassador
- Articles: 0
- Posts: 8210
- Joined: Sun May 12, 2019 3:13 pm
- 4
- Location: Mississippi Gulf Coast
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: A quick Compare of the new BlurXterminator AI
Wow!
That is really amazing David!
Maybe I will dig up some of those old images with my old mount!
That is really amazing David!
Maybe I will dig up some of those old images with my old mount!
Jim
Scopes: Explore Scientific ED102 APO, Sharpstar 61 EDPH II APO, Samyang 135 F2 (still on the Nikon).
Mount: Skywatcher HEQ5 Pro with Rowan Belt Mod
Stuff: ASI EAF Focus Motor (x2), ZWO OAG, ZWO 30 mm Guide Scope, ASI 220mm min, ASI 120mm mini, Stellarview 0.8 FR/FF, Sharpstar 0.8 FR/FF, Mele Overloock 3C.
Camera/Filters/Software: ASI 533 mc pro, ASI 120mm mini, ASI 220mm mini , IDAS LPS D-1, Optolong L-Enhance, ZWO UV/IR Cut, N.I.N.A., Green Swamp Server, PHD2, Adobe Photoshop CC, Pixinsight.
Dog and best bud: Jack
Sky: Bortle 6-7
My Astrobin: https://www.astrobin.com/users/Juno16/
Scopes: Explore Scientific ED102 APO, Sharpstar 61 EDPH II APO, Samyang 135 F2 (still on the Nikon).
Mount: Skywatcher HEQ5 Pro with Rowan Belt Mod
Stuff: ASI EAF Focus Motor (x2), ZWO OAG, ZWO 30 mm Guide Scope, ASI 220mm min, ASI 120mm mini, Stellarview 0.8 FR/FF, Sharpstar 0.8 FR/FF, Mele Overloock 3C.
Camera/Filters/Software: ASI 533 mc pro, ASI 120mm mini, ASI 220mm mini , IDAS LPS D-1, Optolong L-Enhance, ZWO UV/IR Cut, N.I.N.A., Green Swamp Server, PHD2, Adobe Photoshop CC, Pixinsight.
Dog and best bud: Jack
Sky: Bortle 6-7
My Astrobin: https://www.astrobin.com/users/Juno16/
- SkyHiker
- Local Group Ambassador
- Articles: 0
- Posts: 2293
- Joined: Sat May 11, 2019 8:40 pm
- 4
- Location: Santa Barbara, CA
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: A quick Compare of the new BlurXterminator AI
That's like cheating! Now I have to try it, my images are all like that. Well not the fracs.
Question: Are you supposed to use blurX on raw, unstretched/linear, data, or any? I just heard from someone on the Losmandy forum that he tried it both ways and the new version works well either way.
Question: Are you supposed to use blurX on raw, unstretched/linear, data, or any? I just heard from someone on the Losmandy forum that he tried it both ways and the new version works well either way.
... Henk. Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
- Jockinireland
- Milky Way Ambassador
- Articles: 0
- Posts: 1929
- Joined: Sat Aug 24, 2019 7:56 pm
- 4
- Location: Galway
- Status:
Offline
-
TSS Photo of the Day
Re: A quick Compare of the new BlurXterminator AI
Yes there is already blowback from the "purists" that this is unacceptable as anSkyHiker wrote: ↑Sat Dec 16, 2023 3:34 am That's like cheating! Now I have to try it, my images are all like that. Well not the fracs.
Question: Are you supposed to use blurX on raw, unstretched/linear, data, or any? I just heard from someone on the Losmandy forum that he tried it both ways and the new version works well either way.
Thats a very severe example but it really is incredible. I've only tried it with a few images so far so please report back as you get results.
So what I've read is that the AI was trained only on linear so that is going to give the optimum result. But there is also an expectation that it will still do a good job at non linear. Some people have reported positive results on non linear. Let us know if you try it.
Scope: Skywatcher Evostar 80ED (SW 0.85 FR/FF) on a SW NEQ6Pro
Guiding; SW Evoguide 50ED, ASI 120mm mini
Meade 8" LX200 GPS on wedge (Guided with a cheapo 50mm guidescope and a ZWO ASI 120mm mini)
Sharpstar 61EDPH II (with dedicated 0.8 reducer) with wiliam Optics 32mm uniguide
Camera: ASI2600MC pro. QHY 163M with ZWO 7nm NB filters, Canon EOS700D astro mod
Secondary mount: Skywatcher StarAdventurer
My Astrobin https://www.astrobin.com/users/mackiedlm/
Guiding; SW Evoguide 50ED, ASI 120mm mini
Meade 8" LX200 GPS on wedge (Guided with a cheapo 50mm guidescope and a ZWO ASI 120mm mini)
Sharpstar 61EDPH II (with dedicated 0.8 reducer) with wiliam Optics 32mm uniguide
Camera: ASI2600MC pro. QHY 163M with ZWO 7nm NB filters, Canon EOS700D astro mod
Secondary mount: Skywatcher StarAdventurer
My Astrobin https://www.astrobin.com/users/mackiedlm/
- SkyHiker
- Local Group Ambassador
- Articles: 0
- Posts: 2293
- Joined: Sat May 11, 2019 8:40 pm
- 4
- Location: Santa Barbara, CA
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: A quick Compare of the new BlurXterminator AI
Finally, BlurXTerminator does what I wanted it to do when I bought it! Here is a comparison, BXT to the left, non-BXT to the right. The data is an Autosave.tif from DSS . I ran BXT on it, then edited in Gimp with the same parameters. Gimp has a nice feature that lets you save stretching curves so you can replicate the exact same processing. We can now throw our coma correctors and field flatteners in the trash. I am not sure if I was using a field flattener on the scope (and ED80) but it looks like I wasn't.
Last edited by SkyHiker on Sat Dec 16, 2023 6:42 pm, edited 1 time in total.
... Henk. Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
- SkyHiker
- Local Group Ambassador
- Articles: 0
- Posts: 2293
- Joined: Sat May 11, 2019 8:40 pm
- 4
- Location: Santa Barbara, CA
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: A quick Compare of the new BlurXterminator AI
BTW Here are the full images at 33% (BXT first, non-BXT second):
... Henk. Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
- SkyHiker
- Local Group Ambassador
- Articles: 0
- Posts: 2293
- Joined: Sat May 11, 2019 8:40 pm
- 4
- Location: Santa Barbara, CA
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: A quick Compare of the new BlurXterminator AI
Here's another version of the differences that is easier to flip back and forth (BXT first, non-BXT second):
... Henk. Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute