ED102CF focuser "notchy"?
- munkster
- Earth Ambassador
- Articles: 0
- Posts: 28
- Joined: Sun Feb 23, 2020 4:20 pm
- 4
- Location: UK
- Status:
Offline
ED102CF focuser "notchy"?
Not a big deal (or is it?) but the coarse focuser seems to "clonk" at a particular point. Anyone experience this? I'm guessing not specific to this scope. Am wondering if, when I first got it, I focused with the lock thumbscrew tightened down on ignorance. Could that have caused this? Can it be fixed? Presumably I don't need to go to the expense of a new focuser?
- yobbo89
- Moderator
- Articles: 0
- Posts: 2599
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: ED102CF focuser "notchy"?
what type of focuser ? typical newt crayford ,or a refractor with the gear rack and pinion ? edit: i miss the title aha, yep ed 102 refractor ..
when you say clonk, do you mean that it's tight in one spot ? or in a postion the focuser is loos/shifting ?
when you say clonk, do you mean that it's tight in one spot ? or in a postion the focuser is loos/shifting ?
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- John Donne
- Orion Spur Ambassador
- Articles: 0
- Posts: 967
- Joined: Mon Oct 05, 2020 5:34 am
- 3
- Location: US
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: ED102CF focuser "notchy"?
Does this "clonk" happen with every rotation of the course knob or is it happening at one place in the length of the focuser travel?
SCOPES :ES127 f7.5, SW100 f9 Evostar, ES80 F6, LXD75 8" f10 SCT, 2120 10" f10 SCT, ES152 f6.5.
MOUNTS: SW AZ/EQ5, MEADE LXD75, CELESTRON CG4, Farpoint Parallelogram.
BINOCULARS: CL 10X30, Pentax 8X43, 25X100 Oberwerks.
EP: Many.
"I am more than a sum of molecules.
I am more than a sum of memories or events.
I do not one day suddenly cease to be.
I am, before memory.
I am, before event.
I am"
MOUNTS: SW AZ/EQ5, MEADE LXD75, CELESTRON CG4, Farpoint Parallelogram.
BINOCULARS: CL 10X30, Pentax 8X43, 25X100 Oberwerks.
EP: Many.
"I am more than a sum of molecules.
I am more than a sum of memories or events.
I do not one day suddenly cease to be.
I am, before memory.
I am, before event.
I am"
- munkster
- Earth Ambassador
- Articles: 0
- Posts: 28
- Joined: Sun Feb 23, 2020 4:20 pm
- 4
- Location: UK
- Status:
Offline
Re: ED102CF focuser "notchy"?
I've not had this scope out for a couple of weeks so might need to get it out to remind myself. Been meaning to post about it for a little while. I guess it feels like it's sort of missing a tooth at one point on the rotation of the knob (as if it clonks onto the next tooth without stopping in between maybe) but that's a total guess and I've no reason to think that's the case. I'd have to check whether it happens on every rotation.
- John Donne
- Orion Spur Ambassador
- Articles: 0
- Posts: 967
- Joined: Mon Oct 05, 2020 5:34 am
- 3
- Location: US
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: ED102CF focuser "notchy"?
Check it out. It if happens once with each course knob rotation then maybe the knob is canted a bit and rubbing/ dragging in one spot. If it happens in one spot in the length of the focuser travel it could be a bit of hard grease or a piece of debris in the gear track.
SCOPES :ES127 f7.5, SW100 f9 Evostar, ES80 F6, LXD75 8" f10 SCT, 2120 10" f10 SCT, ES152 f6.5.
MOUNTS: SW AZ/EQ5, MEADE LXD75, CELESTRON CG4, Farpoint Parallelogram.
BINOCULARS: CL 10X30, Pentax 8X43, 25X100 Oberwerks.
EP: Many.
"I am more than a sum of molecules.
I am more than a sum of memories or events.
I do not one day suddenly cease to be.
I am, before memory.
I am, before event.
I am"
MOUNTS: SW AZ/EQ5, MEADE LXD75, CELESTRON CG4, Farpoint Parallelogram.
BINOCULARS: CL 10X30, Pentax 8X43, 25X100 Oberwerks.
EP: Many.
"I am more than a sum of molecules.
I am more than a sum of memories or events.
I do not one day suddenly cease to be.
I am, before memory.
I am, before event.
I am"
- munkster
- Earth Ambassador
- Articles: 0
- Posts: 28
- Joined: Sun Feb 23, 2020 4:20 pm
- 4
- Location: UK
- Status:
Offline
Re: ED102CF focuser "notchy"?
Great thanks, all sounds less terminal than I was fearing but who knows.John Donne wrote: ↑Sun Oct 18, 2020 5:22 pm Check it out. It if happens once with each course knob rotation then maybe the knob is canted a bit and rubbing/ dragging in one spot. If it happens in one spot in the length of the focuser travel it could be a bit of hard grease or a piece of debris in the gear track.
- Lady Fraktor
- Infinity and Beyond Ambassador
- Articles: 0
- Posts: 10002
- Joined: Mon Apr 29, 2019 9:14 pm
- 5
- Location: Slovakia
- Status:
Offline
Re: ED102CF focuser "notchy"?
Focusers are fairly robust, so should not have damaged it.
Is your telescope aES with the hexfocuser or a crayford?
Is your telescope a
Gabrielle
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1011110)
The only culture I have is from yogurt
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1011110)
The only culture I have is from yogurt
- munkster
- Earth Ambassador
- Articles: 0
- Posts: 28
- Joined: Sun Feb 23, 2020 4:20 pm
- 4
- Location: UK
- Status:
Offline
Re: ED102CF focuser "notchy"?
The product page says it "includes a new 2.5" Hexagonal focuser" so I guess it's a hexfocuser??
- John Donne
- Orion Spur Ambassador
- Articles: 0
- Posts: 967
- Joined: Mon Oct 05, 2020 5:34 am
- 3
- Location: US
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: ED102CF focuser "notchy"?
I had an
I contacted The folks at Explore Scientific and they sent me a new focuser no charge. The scope was less that 365 days old at the time. The new focuser was a good one.
I am interested in your outcome on this problem.
SCOPES :ES127 f7.5, SW100 f9 Evostar, ES80 F6, LXD75 8" f10 SCT, 2120 10" f10 SCT, ES152 f6.5.
MOUNTS: SW AZ/EQ5, MEADE LXD75, CELESTRON CG4, Farpoint Parallelogram.
BINOCULARS: CL 10X30, Pentax 8X43, 25X100 Oberwerks.
EP: Many.
"I am more than a sum of molecules.
I am more than a sum of memories or events.
I do not one day suddenly cease to be.
I am, before memory.
I am, before event.
I am"
MOUNTS: SW AZ/EQ5, MEADE LXD75, CELESTRON CG4, Farpoint Parallelogram.
BINOCULARS: CL 10X30, Pentax 8X43, 25X100 Oberwerks.
EP: Many.
"I am more than a sum of molecules.
I am more than a sum of memories or events.
I do not one day suddenly cease to be.
I am, before memory.
I am, before event.
I am"
- Lady Fraktor
- Infinity and Beyond Ambassador
- Articles: 0
- Posts: 10002
- Joined: Mon Apr 29, 2019 9:14 pm
- 5
- Location: Slovakia
- Status:
Offline
Re: ED102CF focuser "notchy"?
Check that all is tight, the first hexfocuser that I had to deal with had a loose gear plate for the R&P.
Inspect the teeth as well to make sure they are all straight.
One other thing to check if if the drawtube is staying flat or drooping after a certain distance.
Put some weight in the focuser and rack it in and out watching to see if the drawtube moves up or down as it goes.
Gabrielle
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1011110)
The only culture I have is from yogurt
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1011110)
The only culture I have is from yogurt
- Bigzmey
- Moderator
- Articles: 8
- Posts: 7672
- Joined: Sat May 11, 2019 7:55 pm
- 4
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: ED102CF focuser "notchy"?
The focuser may just need some tuning. I had ES 127CF and 102CF scopes in the past. For both I took focusers apart, re-greased and re-tensioned them, which improved smoothness and addressed focuser tube sagging.
Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
- munkster
- Earth Ambassador
- Articles: 0
- Posts: 28
- Joined: Sun Feb 23, 2020 4:20 pm
- 4
- Location: UK
- Status:
Offline
Re: ED102CF focuser "notchy"?
Sounds a bit hardcore. I'm not exactly technically illiterate but might need to watch a few YouTube videos on this, if they even exist, before getting the spanners out!!
- Lady Fraktor
- Infinity and Beyond Ambassador
- Articles: 0
- Posts: 10002
- Joined: Mon Apr 29, 2019 9:14 pm
- 5
- Location: Slovakia
- Status:
Offline
Re: ED102CF focuser "notchy"?
Adjusting focusers is fairly normal and usually is not that hard to do once you look it over and figure out how it works.
Good luck and have fun
Good luck and have fun
Gabrielle
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1011110)
The only culture I have is from yogurt
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1011110)
The only culture I have is from yogurt
- Bigzmey
- Moderator
- Articles: 8
- Posts: 7672
- Joined: Sat May 11, 2019 7:55 pm
- 4
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: ED102CF focuser "notchy"?
This is also a procedure you need to learn to be successful in the hobby, like collimating a reflector, or aligning finderscopes. You don't need to take it apart to the last screw, just take the focuser tube out, visually inspect, re-grease and adjust tension screws.Lady Fraktor wrote: ↑Tue Oct 20, 2020 7:28 pm Adjusting focusers is fairly normal and usually is not that hard to do once you look it over and figure out how it works.
Good luck and have fun
Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
- Lady Fraktor
- Infinity and Beyond Ambassador
- Articles: 0
- Posts: 10002
- Joined: Mon Apr 29, 2019 9:14 pm
- 5
- Location: Slovakia
- Status:
Offline
Re: ED102CF focuser "notchy"?
Think of a R&P focuser as a bit of a see-saw.
Your accessories are at one end, the pinion is the fulcrum and applied tension in the focuser balances it out at the other end.
Once you have it figured out you will be able to adjust it quickly in future.
Your accessories are at one end, the pinion is the fulcrum and applied tension in the focuser balances it out at the other end.
Once you have it figured out you will be able to adjust it quickly in future.
Gabrielle
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1011110)
The only culture I have is from yogurt
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1011110)
The only culture I have is from yogurt
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute