I didn't order the machining for a tiller / handle which might have been a mistake, but we shall see. So if it gets here in a week, the last half of July should be totally cloudy, right?
Ordered an M1V
- pakarinen
- Articles: 0
- Posts: 4038
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Ordered an M1V
I didn't order the machining for a tiller / handle which might have been a mistake, but we shall see. So if it gets here in a week, the last half of July should be totally cloudy, right?
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- helicon Online
- Co-Administrator
- Articles: 598
- Posts: 12424
- Joined: Mon May 06, 2019 1:35 pm
- 5
- Location: Washington
- Status:
Online
-
TSS Awards Badges
Re: Ordered an M1V
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
- pakarinen
- Articles: 0
- Posts: 4038
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: Ordered an M1V
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- Lady Fraktor
- Articles: 0
- Posts: 10035
- Joined: Mon Apr 29, 2019 9:14 pm
- 5
- Location: Slovakia
- Status:
Offline
Re: Ordered an M1V
Enjoy
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1000101)
The only culture I have is from yogurt
- pakarinen
- Articles: 0
- Posts: 4038
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: Ordered an M1V
After using locking levers on my TW1 axes, this is going to take a little time to get get used to.
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- Jones
- Articles: 0
- Posts: 179
- Joined: Tue Jun 23, 2020 12:21 am
- 3
- Location: Arizona
- Status:
Offline
Re: Ordered an M1V
Triple lensed fracs are so yummy when looking at planets.
- Ylem
- Articles: 0
- Posts: 7624
- Joined: Sun May 12, 2019 2:54 am
- 5
- Location: Ocean County, New Jersey
- Status:
Offline
-
TSS Photo of the Day
Re: Ordered an M1V
I could see that on my photo tripod
-Jeff
Member; ASTRA-NJ
Orion 80ED
Celestron C5, 6SE, Celestar 8
Vixen Porta Mount ll
Coronado PST
A big box of Plossls
Little box of filters
- pakarinen
- Articles: 0
- Posts: 4038
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: Ordered an M1V
It's very well machined and constructed and it is compact and light. Nice wide dovetail clamp so you don't "mar your bar".
It's difficult to get good tension adjustment. It's either too tight so it jerks or it's too loose so it slips. If it's loose enough to glide, changing EPs can make it droop in altitude but tightening alt can knock the scope off target. Unlike the alt adjust, the az tension ring slips if overtightened so it never locks completely in az, although that's not a big deal IMO. There's a nylon washer bearing for az, so maybe there's a problem with that.
I noticed after buying it that Altair sells the same mount with a counterweight and an extension, so that might have been a better choice.
I was going to sell it, but I'm going to play with it a bit more; maybe I just need more finesse when using it and I do like the solid feel and compact size. I believe the M2C is manufactured by
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- Jones
- Articles: 0
- Posts: 179
- Joined: Tue Jun 23, 2020 12:21 am
- 3
- Location: Arizona
- Status:
Offline
Re: Ordered an M1V
Triple lensed fracs are so yummy when looking at planets.
- pakarinen
- Articles: 0
- Posts: 4038
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: Ordered an M1V
I'm going to check the az washer again and maybe give it one more try, but I do think mine is destined for the classifieds. Dang shame since I do like the form and light weight. I hope yours works out for you and look forward to hearing about your experiences and any tips and tricks.
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- Jones
- Articles: 0
- Posts: 179
- Joined: Tue Jun 23, 2020 12:21 am
- 3
- Location: Arizona
- Status:
Offline
Re: Ordered an M1V
Worked better than my attempts of a homemade head.
For the Jupiter, Saturn conjunction probably will use a larger
scope on the M2 mount, around 100x will be the max to get both planets in field.
Triple lensed fracs are so yummy when looking at planets.
- pakarinen
- Articles: 0
- Posts: 4038
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: Ordered an M1V
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- Jones
- Articles: 0
- Posts: 179
- Joined: Tue Jun 23, 2020 12:21 am
- 3
- Location: Arizona
- Status:
Offline
Re: Ordered an M1V
Unscrew the tension knob all the way and there is a brass washer and 2 stainless washers sandwiching the washer with the roller bearing in it. All those looked dry so added some grease there also.
The horizontal movement is fine on mine. Might take it apart tomorrow just to see what's there, but maybe not, do not want to introduce a problem.
Triple lensed fracs are so yummy when looking at planets.
- pakarinen
- Articles: 0
- Posts: 4038
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: Ordered an M1V
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- pakarinen
- Articles: 0
- Posts: 4038
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: Ordered an M1V
It is a nice little mount, just not for me.
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- ARock
- Articles: 0
- Posts: 363
- Joined: Mon May 13, 2019 4:06 am
- 5
- Location: USA
- Status:
Offline
-
TSS Awards Badges
Re: Ordered an M1V
Thanks for the feedback. I recently tried a 3 axis video head with the Meade AS80, and came to the same conclusion. I need slow-mos.
Do you still have the AZ5 ? How does it compare to the TW1 ?
Scopes: Zhumell Z8, Meade Adventure 80mm, Bushnell 1300x100 Goto Mak.
Mount: ES EXOS Nano EQ Mount, DIY Arduino+Stepper drives.
AP: 50mm guidescope, AR0130 based guidecam, Canon T3i, UHC filter.
EPs: ES82 18,11,6.7mm, Zhumell 30,9mm FJ Ortho 9mm, assorted plossls, Meade 2x S-F Barlow, DGM NPB filter.
Binos: Celestron Skymaster 15x70 (Albott tripod/monopod), Nikon Naturalist 7x35.
- pakarinen
- Articles: 0
- Posts: 4038
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: Ordered an M1V
It's a bit lighter and more compact than the Twilight. There's a slight kickback when using the az slo-mo at higher powers with my ST120. Not enough to throw a target out of the field, but enough to move it slightly off-center in the
I think the AZ5 is a bit more stable b/c it has a shorter arm, but I've not done a side-by-side comparison. The TW might be better on its native tripod than on my Manfrotto. The Manfrotto is lighter and more portable though.
I have mixed feelings about the encoders on the TW1. They work well, but a Wixey plus sweeping in az is working pretty well for finding targets with the AZ5.
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- OzEclipse
- Moderator
- Articles: 2
- Posts: 2429
- Joined: Sat May 11, 2019 8:11 am
- 5
- Location: Young, NSW, Australia, 34S, 148E
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Ordered an M1V
Hi Parkarinen,
I definitely did not ship this to you.
Check to see if you can hear any ticking.
Joe Cali
Amateur astronomer since 1978...................Web site : http://joe-cali.com/
Scopes: ATM 18" Dob, Vixen VC200L, ATM 6"f7, Stellarvue 102ED, Saxon ED80, WO M70 ED, Orion 102 Maksutov, ST80.
Mounts: Takahashi EM-200, iOptron iEQ45, Push dobsonian with Nexus DSC, three homemade EQ's.
Eyepieces: TV Naglers 31, 17, 12, 7; Denkmeier D21 & D14; Pentax XW10, XW5, Unitron 40mm Kellner, Meade Or 25,12
Cameras : Pentax K1, K5, K01, K10D / VIDEO CAMS : TacosBD, Lihmsec.
Cam/guider/controllers: Lacerta MGEN 3, SW Synguider, Simulation Curriculum SkyFi 3+Sky safari
Memberships Astronomical Association of Queensland; RASNZ Occultations Section; Single Exposure Milky Way Facebook Group (Moderator) (12k members), The Sky Searchers (moderator)
- pakarinen
- Articles: 0
- Posts: 4038
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: Ordered an M1V
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- Roverich
- Articles: 0
- Posts: 78
- Joined: Tue Jan 25, 2022 2:49 am
- 2
- Location: Virginia nova.
- Status:
Offline
Re: Ordered an M1V
I have a m1 . One of the originals , planning on keeping it and ordering a m2 for the new 102ed scope that's on the way. Hoping the older m1 will hold the new scope until the m2 is in stock again.
In route. Astrotech 102ed refractor
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute