Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
I am sure this question has been asked numerous times, so I apologize in advance!
I am attempting to set up PHD2 , and am trying to use my ASI1224 as the guide camera. I have it plugged into the back of my ASI183MC Pro.
Device manager sees both cameras.
To this point, I have not been able to pick the connection for PHD2 to find the guide camera. The choices i see available are ASI1, ASI2, and ZWO ASI camera.
Also, since I am on the topic, would the mount connection be ASCOM Generic ?
First off, do you have all the appropriate ASCOM drivers for your gear (the cameras and the mount) loaded onto your computer? After you are sure the drivers are loaded, start up POTH and see if ASCOM sees both of your cameras, if so, then PHD2 will also see them. If this does not fix your issue, come back for more troubleshooting.
Cheers,
JT
∞ Primary Scopes: #1: Celestron CPC1100 #2: 8" f/7.5 Dob #3: CR150HD f/8 6" frac ∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO ∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5 ∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros. ∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000 ∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3 ∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter ∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
Hmm.... Right next to the camera dropdown, where it says ASI camera, do you see a tiny icon that looks like a sideways "Y"? If so, click that and you can select between the two cameras.
Good Luck.
Scopes: Esprit 100, 12.5" Telekit Dob Camera: 294 MC Pro, 224 mc, 2600mm Guiding: ZWO 290 mini on 120mm guide scope Mounts: EQ6R-Pro, EQ Platform. Filters: Optolong L-Pro & L-Enhance, Chroma 36mm LRGB, 5nm HA, 3nm OIII, 3nm SII. Software: SharpCap, SGP, StarTools 1.7, Photoshop, Pixinsight The Death Star Observatory Astro Photos:https://www.astrobin.com/users/starfield/
We need to know what equipment you are using (not just the cameras) before we can give you any educated guesses as to what problem you are experiencing.
Most everyone on these forums puts their gear into their signature so questions like the above don't need to happen.
Cheers,
JT
∞ Primary Scopes: #1: Celestron CPC1100 #2: 8" f/7.5 Dob #3: CR150HD f/8 6" frac ∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO ∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5 ∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros. ∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000 ∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3 ∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter ∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."