Tripod Stiffener/Stabilizer for a Meade Field Tripod
- JayTee
- Co-Administrator
- Articles: 2
- Posts: 5657
- Joined: Thu Apr 25, 2019 3:23 am
- 5
- Location: Idaho, USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Tripod Stiffener/Stabilizer for a Meade Field Tripod
Here's the tripod. Cheers,
JT
∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO
∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5
∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros.
∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3
∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter
∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
- JimMinCT
- Articles: 0
- Posts: 393
- Joined: Tue May 07, 2019 10:24 pm
- 5
- Location: Ct
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
- JayTee
- Co-Administrator
- Articles: 2
- Posts: 5657
- Joined: Thu Apr 25, 2019 3:23 am
- 5
- Location: Idaho, USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
Hi ET,
I thought I would put in the stiffener/stabilizer first (as it will also double as an
Cheers,
ET
∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO
∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5
∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros.
∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3
∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter
∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
- bladekeeper
- Articles: 0
- Posts: 3603
- Joined: Thu Apr 25, 2019 2:39 am
- 5
- Location: Lowell, Arkansas, US
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
Scopes: Apertura AD12 f/5; Celestron C6-R f/8; ES AR127 f/6.4; Stellarvue SV102T f/7; iOptron MC90 f/13.3; Orion ST80A f/5; ES ED80 f/6; Celestron Premium 80 f/11.4; Celestron C80 f/11.4; Unitron Model 142 f/16; Meade NG60 f/10
Mounts: Celestron AVX; Bresser EXOS-2; ES Twilight I; ES Twilight II; iOptron Cube-G; AZ3/wood tripod; Vixen Polaris
Binoculars: Pentax PCF WP II 10×50, Bresser Corvette 10×50, Bresser Hunter 16×50 and 8×40, Garrett Gemini 12×60 LW, Gordon 10×50, Apogee 20×100
- Bigzmey Online
- Moderator
- Articles: 8
- Posts: 7791
- Joined: Sat May 11, 2019 7:55 pm
- 5
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
As an option you can insert small rubber pads (I use furniture/chair legs pads) between the disk and the legs.
You could do the same on top of the spreader, but in this case the disk needs to be slightly smaller, or you would not be able to insert it.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3122 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2196, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
- JayTee
- Co-Administrator
- Articles: 2
- Posts: 5657
- Joined: Thu Apr 25, 2019 3:23 am
- 5
- Location: Idaho, USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
Thanks Andrey, that is very helpful.Bigzmey wrote: ↑Mon Feb 10, 2020 9:48 pm You can make a disk slightly larger than the distance between the legs and bolt it to the spreader at 4 points underneath of the spreader with long bolts to control the tension.
As an option you can insert small rubber pads (I use furniture/chair legs pads) between the disk and the legs.
You could do the same on top of the spreader, but in this case the disk needs to be slightly smaller, or you would not be able to insert it.
If I size it correctly, does it really matter whether it goes on top of or below the flimsy spreader hardware?
Cheers,
JT
∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO
∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5
∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros.
∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3
∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter
∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
- Bigzmey Online
- Moderator
- Articles: 8
- Posts: 7791
- Joined: Sat May 11, 2019 7:55 pm
- 5
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
Since the legs converging up, it will be easier to make the contact with all 3 legs and apply the pressure from below. This is how spreaders work on most of the mounts. In fact I would suggest to make the disk a bit wider to insure that the pressure is applied when you tide it in.JayTee wrote: ↑Mon Feb 10, 2020 10:35 pmThanks Andrey, that is very helpful.Bigzmey wrote: ↑Mon Feb 10, 2020 9:48 pm You can make a disk slightly larger than the distance between the legs and bolt it to the spreader at 4 points underneath of the spreader with long bolts to control the tension.
As an option you can insert small rubber pads (I use furniture/chair legs pads) between the disk and the legs.
You could do the same on top of the spreader, but in this case the disk needs to be slightly smaller, or you would not be able to insert it.
If I size it correctly, does it really matter whether it goes on top of or below the flimsy spreader hardware?
Cheers,
JT
Another and potentially more stable option is to make two disks (smaller on top, larger on bottom).
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3122 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2196, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
- JayTee
- Co-Administrator
- Articles: 2
- Posts: 5657
- Joined: Thu Apr 25, 2019 3:23 am
- 5
- Location: Idaho, USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
Thank you,Bigzmey wrote: ↑Mon Feb 10, 2020 10:45 pmSince the legs converging up, it will be easier to make the contact with all 3 legs and apply the pressure from below. This is how spreaders work on most of the mounts. In fact, I would suggest making the disk a bit wider to ensure that the pressure is applied when you tie it in.
Another and potentially more stable option is to make two disks (smaller on top, larger on bottom).
I'll be constructing this new stabilizer/accessory this week. I'll post pictures to show how I accomplished this mod.
Cheers,
JT
∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO
∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5
∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros.
∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3
∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter
∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
- Bigzmey Online
- Moderator
- Articles: 8
- Posts: 7791
- Joined: Sat May 11, 2019 7:55 pm
- 5
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
Should be fun. Will you use plywood?JayTee wrote: ↑Mon Feb 10, 2020 10:48 pmThank you,Bigzmey wrote: ↑Mon Feb 10, 2020 10:45 pmSince the legs converging up, it will be easier to make the contact with all 3 legs and apply the pressure from below. This is how spreaders work on most of the mounts. In fact, I would suggest making the disk a bit wider to ensure that the pressure is applied when you tie it in.
Another and potentially more stable option is to make two disks (smaller on top, larger on bottom).
I'll be constructing this new stabilizer/accessory this week. I'll post pictures to show how I accomplished this mod.
Cheers,
JT
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3122 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2196, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
- Bigzmey Online
- Moderator
- Articles: 8
- Posts: 7791
- Joined: Sat May 11, 2019 7:55 pm
- 5
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
https://www.homedepot.com/p/Shepherd-2- ... /202514361
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3122 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2196, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
- JayTee
- Co-Administrator
- Articles: 2
- Posts: 5657
- Joined: Thu Apr 25, 2019 3:23 am
- 5
- Location: Idaho, USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
Yes, I have a sheet of 3/8" plywood that I had planned on using. I also have a large amount of 5/8" composite used for kitchen cabinet shelves. I'm not sure I want to use that because it is dense and heavy. What do you think?
Thanks for the link to the pads. I was wracking my brain for what I should use. I came up with either cutting up a tennis ball or a racquetball and using slices of it. I think the already made pads are a better idea, especially at that price.
When you say wrap them around the disk edge, do you mean where the disk makes contact with the tripod leg?
Cheers,
JT
∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO
∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5
∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros.
∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3
∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter
∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
- Bigzmey Online
- Moderator
- Articles: 8
- Posts: 7791
- Joined: Sat May 11, 2019 7:55 pm
- 5
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
Correct, at the points of contact. They will help to make better contact with legs and protect the edge from chipping.
I think both plywood and composite are suitable. I would go with plywood, because it is easier to work with.
However, if you have right tools, composite will resist better to warping and may provide a bit more stability
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3122 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2196, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
- GCoyote
- Articles: 0
- Posts: 2709
- Joined: Mon May 13, 2019 2:53 am
- 5
- Location: Laurel, MD, USA
- Status:
Offline
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
I'm basically doing the same project but I'm not quite ready to start making sawdust yet.JayTee wrote: ↑Mon Feb 10, 2020 11:11 pmYes, I have a sheet of 3/8" plywood that I had planned on using. I also have a large amount of 5/8" composite used for kitchen cabinet shelves. I'm not sure I want to use that because it is dense and heavy. What do you think?
Thanks for the link to the pads. I was wracking my brain for what I should use. I came up with either cutting up a tennis ball or a racquetball and using slices of it. I think the already made pads are a better idea, especially at that price.
When you say wrap them around the disk edge, do you mean where the disk makes contact with the tripod leg?
Cheers,
JT
I've already found a spare J-bolt to fit in the center hole of the spreader so I can hang a weight. Now that I see what you are doing, I'll use it to hold up the plywood disk from below and use a wing nut on top to get the required tension.
Keep posting pics.
Gary C
Celestron Astro Master 130mm f5 Newtonian GEM
Meade 114-EQ-DH f7.9 Newtonian w/ manual GEM
Bushnell 90mm f13.9 Catadioptric
Gskyer 80mm f5 Alt/Az refractor
Jason 10x50 Binoculars
Celestron 7x50 Binoculars
Svbony 2.1x42 Binoculars
(And a bunch of stuff I'm still trying to fix or find parts for.)
- Lady Fraktor
- Articles: 0
- Posts: 10074
- Joined: Mon Apr 29, 2019 9:14 pm
- 5
- Location: Slovakia
- Status:
Offline
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
Adding extra weight to these tripods only increases weight and puts more force on the already flexing points, instead of actually fixing you are just jamming things together tighter.
No real advantage by doing it.
The only culture I have is from yogurt
- GCoyote
- Articles: 0
- Posts: 2709
- Joined: Mon May 13, 2019 2:53 am
- 5
- Location: Laurel, MD, USA
- Status:
Offline
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
How did it go?JayTee wrote: ↑Mon Feb 10, 2020 10:48 pmThank you,Bigzmey wrote: ↑Mon Feb 10, 2020 10:45 pmSince the legs converging up, it will be easier to make the contact with all 3 legs and apply the pressure from below. This is how spreaders work on most of the mounts. In fact, I would suggest making the disk a bit wider to ensure that the pressure is applied when you tie it in.
Another and potentially more stable option is to make two disks (smaller on top, larger on bottom).
I'll be constructing this new stabilizer/accessory this week. I'll post pictures to show how I accomplished this mod.
Cheers,
JT
Gary C
Celestron Astro Master 130mm f5 Newtonian GEM
Meade 114-EQ-DH f7.9 Newtonian w/ manual GEM
Bushnell 90mm f13.9 Catadioptric
Gskyer 80mm f5 Alt/Az refractor
Jason 10x50 Binoculars
Celestron 7x50 Binoculars
Svbony 2.1x42 Binoculars
(And a bunch of stuff I'm still trying to fix or find parts for.)
- JayTee
- Co-Administrator
- Articles: 2
- Posts: 5657
- Joined: Thu Apr 25, 2019 3:23 am
- 5
- Location: Idaho, USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
Day-to-day life got in the way. I was in a minor traffic accident which put my car out of commission. I had to find a new residential care facility for my mom. And a myriad bunch of other things that get in the way of stuff that I have on the front burner and this project is still on the front burner. It's just that there's a lot of other stuff on the front burner right now too.
Thanks for asking though and I will update this post when I am able to crank something out.
Cheers,
JT
∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO
∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5
∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros.
∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3
∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter
∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
- GCoyote
- Articles: 0
- Posts: 2709
- Joined: Mon May 13, 2019 2:53 am
- 5
- Location: Laurel, MD, USA
- Status:
Offline
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
Sorry to hear things had gotten pear-shaped! Hope life sorts itself out for you soon. We'll still be here.JayTee wrote: ↑Fri Mar 06, 2020 8:57 am It hasn't gone yet.
Day-to-day life got in the way. I was in a minor traffic accident which put my car out of commission. I had to find a new residential care facility for my mom. And a myriad bunch of other things that get in the way of stuff that I have on the front burner and this project is still on the front burner. It's just that there's a lot of other stuff on the front burner right now too.
Thanks for asking though and I will update this post when I am able to crank something out.
Cheers,
JT
Gary C
Celestron Astro Master 130mm f5 Newtonian GEM
Meade 114-EQ-DH f7.9 Newtonian w/ manual GEM
Bushnell 90mm f13.9 Catadioptric
Gskyer 80mm f5 Alt/Az refractor
Jason 10x50 Binoculars
Celestron 7x50 Binoculars
Svbony 2.1x42 Binoculars
(And a bunch of stuff I'm still trying to fix or find parts for.)
-
- Articles: 0
- Posts: 268
- Joined: Sat May 11, 2019 10:19 pm
- 5
- Location: Socal,USA
- Status:
Offline
Re: Tripod Stiffener/Stabilizer for a Meade Field Tripod
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute