Dual AZ/EQ mounts
- John in SC
- Earth Ambassador
- Articles: 0
- Posts: 11
- Joined: Wed Jan 01, 2020 5:44 pm
- 4
- Location: South Carolina
- Status:
Offline
Dual AZ/EQ mounts
Hi all, relative newbie here. Have a Nexstar 8se and realize that if I want to pursue astroimaging I will need to add hardware, software and knowledge. I have seen some mounts (Skywatcher and Orion, e.g.) that have dual altazimuth and equatorial capabilities. Is there a disadvantage to using an EQ mount for lunar or planetary imaging? What is the advantage of having both? Would a great GoTo EQ mount not be sufficient for both? Thanks!
RASA 8, EQ6-R PRO, ASI071 MC PRO, ASIAIR PRO
- Bigzmey
- Moderator
- Articles: 8
- Posts: 7663
- Joined: Sat May 11, 2019 7:55 pm
- 4
- Location: San Diego, CA USA
- Status:
Offline
-
TSS Awards Badges
Re: Dual AZ/EQ mounts
Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
- BigKahuna
- Jupiter Ambassador
- Articles: 0
- Posts: 259
- Joined: Wed Jan 01, 2020 12:23 am
- 4
- Location: New Jersey, USA
- Status:
Offline
-
TSS Photo of the Day
Re: Dual AZ/EQ mounts
Although not a full EQ mount, you can purchase (or build) a wedge for your 8SE. The Celestron Wedge will run about $300 to $400 but you can build your own wedge for about $50 in parts. This should get you 1 - 2 minute or so exposures. It's a "decent" upgrade but not near a good as an EQ mount. The setup for using a wedge for the 8SE seems complicated. YouTube has a few people that show the process of both building and the alignment procedure. "Baltier"
Is one of the guys whose videos you should watch
I made a wedge for my 8SE but then purchased an AVX so I never tried it. The shortfall of the 8SE is the 8"OTA is pushing the weight limit of that mount with the single arm YMMV
The 8SE mount is perfect for viewing/imaging the solar system as you dont need long exposures (longer than 20 - 30 second max). It's when you want to image Deep Sky images that the drawback of that az/alt mount will hinder you.
Is one of the guys whose videos you should watch
I made a wedge for my 8SE but then purchased an AVX so I never tried it. The shortfall of the 8SE is the 8"
The 8SE mount is perfect for viewing/imaging the solar system as you dont need long exposures (longer than 20 - 30 second max). It's when you want to image Deep Sky images that the drawback of that az/alt mount will hinder you.
Telescopes/Mounts : Explore Scientific ED102 or Celestron C6N on AVX, 8SE OTA on ASGT, NexStar 114GT/AZ, Meade ETX-90EC w/ Observer Base, Orion XT10i
Binoculars: Pentax 10x50
Camera : ZWO 533MC Pro, Canon EOS Rebel T6, ZWO ASI224MC
Clear Skies,
Ron
Member ASTRA-NJ
Binoculars: Pentax 10x50
Camera : ZWO 533MC Pro, Canon EOS Rebel T6, ZWO ASI224MC
Clear Skies,
Ron
Member ASTRA-NJ
- Viktorious
- Earth Ambassador
- Articles: 0
- Posts: 7
- Joined: Sun Sep 29, 2019 8:55 pm
- 4
- Location: Sweden
- Status:
Offline
Re: Dual AZ/EQ mounts
I myself am looking to buy a AZ-EQ5 (i.e. Skywatcher's combined). As already stated, yes you can use an EQ mount for everything.
The "advantage" of having both is thatalt-az is easier and faster to set up, just put it down and align. As mentioned EQ deals with field rotation and is thus always needed for longer exposures. Setting up takes more effort as polar alignment is needed, the more detailed the better. EQ is not necessary for visual astronomy or solar system photography.
So with a combined mount you can decide which mode to use depending on the "usage of the session". If it's a visual session or solar system photography you can set up inalt-az . If it's a DSO imaging session with long exposures you can setup in EQ .
Don't know where you're situated but here's a table with "longest possible" exposure times inalt-az before field rotation becomes noticeable.
The "advantage" of having both is that
So with a combined mount you can decide which mode to use depending on the "usage of the session". If it's a visual session or solar system photography you can set up in
Don't know where you're situated but here's a table with "longest possible" exposure times in
Viktor
Scopes: Celestron Nexstar Evolution 9.25 (main), Sky-Watcher Heritage-130P Flextube (passed on to my brother)
Diagonals: Baader T-2 Zeiss prism, Celestron 1.25 Star diagonal
Eyepieces: Baader 8-24 mm Zoom, ES68° 24 mm, Celestron Plössls (13 and 40 mm)
Accessories: Celestron Corrector/Reducer f/6.3, Astronomik UHC, SW LPF
Scopes: Celestron Nexstar Evolution 9.25 (main), Sky-Watcher Heritage-130P Flextube (passed on to my brother)
Diagonals: Baader T-2 Zeiss prism, Celestron 1.25 Star diagonal
Eyepieces: Baader 8-24 mm Zoom, ES68° 24 mm, Celestron Plössls (13 and 40 mm)
Accessories: Celestron Corrector/Reducer f/6.3, Astronomik UHC, SW LPF
- Viktorious
- Earth Ambassador
- Articles: 0
- Posts: 7
- Joined: Sun Sep 29, 2019 8:55 pm
- 4
- Location: Sweden
- Status:
Offline
Re: Dual AZ/EQ mounts
Edit to my previous post. Realized I pasted the table for my latitude area. On this page you can see the table for all latitudes and some other information about photography with alt-az .
https://telescopemount.org/short-exposu ... t-results/
https://telescopemount.org/short-exposu ... t-results/
Viktor
Scopes: Celestron Nexstar Evolution 9.25 (main), Sky-Watcher Heritage-130P Flextube (passed on to my brother)
Diagonals: Baader T-2 Zeiss prism, Celestron 1.25 Star diagonal
Eyepieces: Baader 8-24 mm Zoom, ES68° 24 mm, Celestron Plössls (13 and 40 mm)
Accessories: Celestron Corrector/Reducer f/6.3, Astronomik UHC, SW LPF
Scopes: Celestron Nexstar Evolution 9.25 (main), Sky-Watcher Heritage-130P Flextube (passed on to my brother)
Diagonals: Baader T-2 Zeiss prism, Celestron 1.25 Star diagonal
Eyepieces: Baader 8-24 mm Zoom, ES68° 24 mm, Celestron Plössls (13 and 40 mm)
Accessories: Celestron Corrector/Reducer f/6.3, Astronomik UHC, SW LPF
- Bigzmey
- Moderator
- Articles: 8
- Posts: 7663
- Joined: Sat May 11, 2019 7:55 pm
- 4
- Location: San Diego, CA USA
- Status:
Offline
-
TSS Awards Badges
Re: Dual AZ/EQ mounts
This is really depends on how well the mount executed. I don't have experience with AZ-EQ5, but I haveViktorious wrote: ↑Thu Feb 13, 2020 9:21 am I myself am looking to buy a AZ-EQ5 (i.e. Skywatcher's combined). As already stated, yes you can use an EQ mount for everything.
The "advantage" of having both is that alt-az is easier and faster to set up, just put it down and align. As mentioned EQ deals with field rotation and is thus always needed for longer exposures. Setting up takes more effort as polar alignment is needed, the more detailed the better. EQ is not necessary for visual astronomy or solar system photography.
So with a combined mount you can decide which mode to use depending on the "usage of the session". If it's a visual session or solar system photography you can set up in alt-az. If it's a DSO imaging session with long exposures you can setup in EQ.
Don't know where you're situated but here's a table with "longest possible" exposure times in alt-az before field rotation becomes noticeable.
post-316058-0-39712300-1580980680.png
BTW
On the other hand a straight
Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
- Viktorious
- Earth Ambassador
- Articles: 0
- Posts: 7
- Joined: Sun Sep 29, 2019 8:55 pm
- 4
- Location: Sweden
- Status:
Offline
Re: Dual AZ/EQ mounts
Huh I didn't know that about the AZ-Gti! Still only listed asBigzmey wrote: ↑Thu Feb 13, 2020 7:38 pm
This is really depends on how well the mount executed. I don't have experience with AZ-EQ5, but I have SW AzGti mount which is also a dual mode mount. It tries to do both modes, but does not do either with 100% efficiency. Is it badly designed hardware or half-baked software? Who knows.
BTW SW GtiAz uses the same app/soft as AZ-EQ5. So I would really check feedback on forums before committing to it.
On the other hand a straight EQ mount like CGEM is a mature product in the same price range with AZ-EQ5 but with higher load capacity.
Anyway, I'm going with the AZ-EQ5 as I'm looking for a lighter mount (7,7 kg), the
I'm pestered by cloudy nights (real ones, not forums) so I live on the forums at the moment .
Viktor
Scopes: Celestron Nexstar Evolution 9.25 (main), Sky-Watcher Heritage-130P Flextube (passed on to my brother)
Diagonals: Baader T-2 Zeiss prism, Celestron 1.25 Star diagonal
Eyepieces: Baader 8-24 mm Zoom, ES68° 24 mm, Celestron Plössls (13 and 40 mm)
Accessories: Celestron Corrector/Reducer f/6.3, Astronomik UHC, SW LPF
Scopes: Celestron Nexstar Evolution 9.25 (main), Sky-Watcher Heritage-130P Flextube (passed on to my brother)
Diagonals: Baader T-2 Zeiss prism, Celestron 1.25 Star diagonal
Eyepieces: Baader 8-24 mm Zoom, ES68° 24 mm, Celestron Plössls (13 and 40 mm)
Accessories: Celestron Corrector/Reducer f/6.3, Astronomik UHC, SW LPF
- Bigzmey
- Moderator
- Articles: 8
- Posts: 7663
- Joined: Sat May 11, 2019 7:55 pm
- 4
- Location: San Diego, CA USA
- Status:
Offline
-
TSS Awards Badges
Re: Dual AZ/EQ mounts
What scope do you plan to use with AZ-EQ5? I don't think it will handle C9.25 well.Viktorious wrote: ↑Thu Feb 13, 2020 9:17 pmHuh I didn't know that about the AZ-Gti! Still only listed asBigzmey wrote: ↑Thu Feb 13, 2020 7:38 pm
This is really depends on how well the mount executed. I don't have experience with AZ-EQ5, but I have SW AzGti mount which is also a dual mode mount. It tries to do both modes, but does not do either with 100% efficiency. Is it badly designed hardware or half-baked software? Who knows.
BTW SW GtiAz uses the same app/soft as AZ-EQ5. So I would really check feedback on forums before committing to it.
On the other hand a straight EQ mount like CGEM is a mature product in the same price range with AZ-EQ5 but with higher load capacity.alt-az on the pages I shop from. I see there are some posts about a firmware upgrade though (and YT videos). Still, feels like the base design of the AZ-EQ5 vs the Gti is completely different. So I hope I don't experience any of that behavior.
Anyway, I'm going with the AZ-EQ5 as I'm looking for a lighter mount (7,7 kg), theCGEM is 20 kg. Also price difference of 500-600 € is a lot for me! But yes I've done a lot of reading and also created a topic on CN where the AZ-EQ5 got good recommendations.
I'm pestered by cloudy nights (real ones, not forums) so I live on the forums at the moment .
Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
- Viktorious
- Earth Ambassador
- Articles: 0
- Posts: 7
- Joined: Sun Sep 29, 2019 8:55 pm
- 4
- Location: Sweden
- Status:
Offline
Re: Dual AZ/EQ mounts
Visually and solar system photography the C9.25. No issue at 10 kg weight versus the rated 15-18 kg payload. The Evolution is rated at 11 kg... Then as I slide into more serious AP I'll get a small refractor (80-102 mm) for wide field DSOs .
Of course as I save up for the frac I'll be using the C9.25 for everything to get as much practice as possible. Perhaps I should note that I use the C9.25 atf/ 6.3 for basically everything but planets. At f/ 10 I can agree that it would be a different type of pain.
Of course as I save up for the frac I'll be using the C9.25 for everything to get as much practice as possible. Perhaps I should note that I use the C9.25 at
Viktor
Scopes: Celestron Nexstar Evolution 9.25 (main), Sky-Watcher Heritage-130P Flextube (passed on to my brother)
Diagonals: Baader T-2 Zeiss prism, Celestron 1.25 Star diagonal
Eyepieces: Baader 8-24 mm Zoom, ES68° 24 mm, Celestron Plössls (13 and 40 mm)
Accessories: Celestron Corrector/Reducer f/6.3, Astronomik UHC, SW LPF
Scopes: Celestron Nexstar Evolution 9.25 (main), Sky-Watcher Heritage-130P Flextube (passed on to my brother)
Diagonals: Baader T-2 Zeiss prism, Celestron 1.25 Star diagonal
Eyepieces: Baader 8-24 mm Zoom, ES68° 24 mm, Celestron Plössls (13 and 40 mm)
Accessories: Celestron Corrector/Reducer f/6.3, Astronomik UHC, SW LPF
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute