new lathe project
- yobbo89
- Moderator
- Articles: 0
- Posts: 2604
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: new lathe project
- Attachments
-
- tilt ring specs.pdf
- (1.44 MiB) Downloaded 101 times
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- yobbo89
- Moderator
- Articles: 0
- Posts: 2604
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: new lathe project
The threads root is 41.26 mm on my 42mm male adapters i have which should give you 0.14 mm clearance on the t ring threads valleys when screwed into the t ring so it doesn't bind, you can just machine your own tolerance to fit.
you'll just need some short and long 3mm computer thumb screws or whatever size you like.
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- JimMinCT
- Articles: 0
- Posts: 393
- Joined: Tue May 07, 2019 10:24 pm
- 5
- Location: Ct
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: new lathe project
Thank you very much!
- yobbo89
- Moderator
- Articles: 0
- Posts: 2604
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: new lathe project
make sure you debure before you thead!, ahah lesson learnt .
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- yobbo89
- Moderator
- Articles: 0
- Posts: 2604
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: new lathe project
this method was a lot quicker,it took me 20 mins to turn down unlike the first adapters facing method shown in the first post.
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- yobbo89
- Moderator
- Articles: 0
- Posts: 2604
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: new lathe project
i guess i'll have to look for some thumb screws and some of that staining paint.
edit: ohh i need a foam ring
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- JimMinCT
- Articles: 0
- Posts: 393
- Joined: Tue May 07, 2019 10:24 pm
- 5
- Location: Ct
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: new lathe project
Great job!
- JimMinCT
- Articles: 0
- Posts: 393
- Joined: Tue May 07, 2019 10:24 pm
- 5
- Location: Ct
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: new lathe project
I've been puttering around with a Grizzly G0602 10x22 now for a few weeks and love it. (No DRO's on my machine yet, though...)
https://www.grizzly.com/products/Grizzl ... athe/G0602
I'm looking into the upgrades for it and studying YouTube channels for tips.
I have a small scale model of a scope and mount I'm working on... I'll put up a pic or two when i get home from work today.
Very nice job on the tilt ring!
I need to get some material for that project.
Cheers!
- yobbo89
- Moderator
- Articles: 0
- Posts: 2604
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: new lathe project
This is the lathe I have, opti is the brand name, I think it's made in Taiwan and may be a German company , it's an alright cheap lathe, does left and right hand thread, metric and imperial, no auto crossfeed. I think it's about the same size as yours.JimMinCT wrote: ↑Mon Oct 07, 2019 11:43 am What lathe are you using?
I've been puttering around with a Grizzly G0602 10x22 now for a few weeks and love it. (No DRO's on my machine yet, though...)
https://www.grizzly.com/products/Grizzl ... athe/G0602
I'm looking into the upgrades for it and studying YouTube channels for tips.
I have a small scale model of a scope and mount I'm working on... I'll put up a pic or two when i get home from work today.
Very nice job on the tilt ring!
I need to get some material for that project.
Cheers!
https://www.machineryhouse.com.
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
-
- Articles: 0
- Posts: 2
- Joined: Thu Dec 12, 2019 7:20 pm
- 4
- Location: Oklahoma
- Status:
Offline
Re: new lathe project
Hi everyone! I'm new here and these are just great reads.
My family has owned a lathe for years now from SummitMT https://www.summitmt.com/. We have the 14x40 manual lathe.
When I was a kid my dad and I would usually spend an entire afternoon just tinkering in our shed.
And last year I started doing my own projects with ideas I got from this site - https://www.summitmt.com/metal-lathe-projects/ and also some from youtube videos.
I actually tried doing the ring and well it came out alright.
But seeing this and knowing that I can also do parts of a scope from the equipment I have is amazing!
I'll have to try this one for myself and share photos with everyone.
Thanks guys.
- goldstar
- Articles: 0
- Posts: 291
- Joined: Sat May 11, 2019 6:40 pm
- 4
- Location: New York State
- Status:
Offline
Re: new lathe project
Ok, so not a metal lathe but it's probably the only way I can have anything similar.
I got to use just such a device many years ago (no, I am not that old!) and enjoyed using it and with some success.
The immediacy, tactile and visual feedback of the process was astonishing and very fulfilling.
I made a stool leg in minutes.
Just wait until the lights go out!
Mount: AVX.
NexGuide auto guider. Cameras 3 Ti and XS modded. I optron Skytracker.
Motley EP collection.
- helicon Online
- Co-Administrator
- Articles: 596
- Posts: 12405
- Joined: Mon May 06, 2019 1:35 pm
- 5
- Location: Washington
- Status:
Online
-
TSS Awards Badges
Re: new lathe project
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
- yobbo89
- Moderator
- Articles: 0
- Posts: 2604
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: new lathe project
it looks like it machines as fast as a modern wood lathe !goldstar wrote: ↑Thu Dec 12, 2019 8:37 pm
Ok, so not a metal lathe but it's probably the only way I can have anything similar.
I got to use just such a device many years ago (no, I am not that old!) and enjoyed using it and with some success.
The immediacy, tactile and visual feedback of the process was astonishing and very fulfilling.
I made a stool leg in minutes.
Just wait until the lights go out!
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- yobbo89
- Moderator
- Articles: 0
- Posts: 2604
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: new lathe project
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute