new lathe project

Tell us about those other projects you are working on.
User avatar
yobbo89 Australia
Moderator
Moderator
Articles: 0
Offline
Posts: 2560
Joined: Sat May 11, 2019 7:44 pm
4
Location: australia qld brisbane
Status:
Offline

TSS Photo of the Day

Re: new lathe project

#21

Post by yobbo89 »


I did a drawing, took a while haha. you might want to check your own male adapters to suit fit for play, should be able to get down in the threads with very pointy calipers, attached a pdf as well, you will need to cut out a foam ring for that 6mmx1.8mm recess to shield from stray light.
Attachments
tilt ring specs.pdf
(1.44 MiB) Downloaded 93 times
scan16237629.jpg
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .

Image
User avatar
yobbo89 Australia
Moderator
Moderator
Articles: 0
Offline
Posts: 2560
Joined: Sat May 11, 2019 7:44 pm
4
Location: australia qld brisbane
Status:
Offline

TSS Photo of the Day

Re: new lathe project

#22

Post by yobbo89 »


The recessed groove starts from 6.27 mm from the outside edge the adapter .

The threads root is 41.26 mm on my 42mm male adapters i have which should give you 0.14 mm clearance on the t ring threads valleys when screwed into the t ring so it doesn't bind, you can just machine your own tolerance to fit.

you'll just need some short and long 3mm computer thumb screws or whatever size you like.
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .

Image
User avatar
JimMinCT United States of America
Saturn Ambassador
Articles: 0
Offline
Posts: 393
Joined: Tue May 07, 2019 10:24 pm
4
Location: Ct
Status:
Offline

TSS Awards Badges

TSS Photo of the Day

Re: new lathe project

#23

Post by JimMinCT »


Awesome!
Thank you very much!
OTA's: Kson 1026-C, 4" Carbon Fiber ED Refractor, Home-built, 6.1", f/2.? APO refractor... (In Progress) 8" Meade LX2 SCT Mounts: CGX Imaging: ZWO ASI 1600MM, Canon 550D (T2i) Software: PixInsight, APT, PHD2, SharpCap, SGP, Stellarium, Registax, Stuff: Astro-Tech 0.8x FR/FF, Hotech SCA FF, ZWO 7nm 31mm LRGB-SHO filter set, ZWO 8 position EFWObsy: "Maybe Spaceship" Observatory
Image
User avatar
yobbo89 Australia
Moderator
Moderator
Articles: 0
Offline
Posts: 2560
Joined: Sat May 11, 2019 7:44 pm
4
Location: australia qld brisbane
Status:
Offline

TSS Photo of the Day

Re: new lathe project

#24

Post by yobbo89 »


no problem. feel free to ask any questions about the drawing, a bit of a messy hand drawn one.

make sure you debure before you thead!, ahah lesson learnt .
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .

Image
User avatar
yobbo89 Australia
Moderator
Moderator
Articles: 0
Offline
Posts: 2560
Joined: Sat May 11, 2019 7:44 pm
4
Location: australia qld brisbane
Status:
Offline

TSS Photo of the Day

Re: new lathe project

#25

Post by yobbo89 »


bore and threaded the second half and machined down the od. a little trick to work around those larger parts on small chucks or anything without a whole lot of material to clamp down in the chuck,just put in a m42 adapter and screw it in lightly,the load will hold it in.
this method was a lot quicker,it took me 20 mins to turn down unlike the first adapters facing method shown in the first post.
Attachments
20191006_170140.jpg
20191006_172223.jpg
20191006_174130.jpg
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .

Image
User avatar
yobbo89 Australia
Moderator
Moderator
Articles: 0
Offline
Posts: 2560
Joined: Sat May 11, 2019 7:44 pm
4
Location: australia qld brisbane
Status:
Offline

TSS Photo of the Day

Re: new lathe project

#26

Post by yobbo89 »


almost done!, the finish isn't excellent or the deburring( still learning)

i guess i'll have to look for some thumb screws and some of that staining paint.

edit: ohh i need a foam ring
Attachments
20191007_174649.jpg
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .

Image
User avatar
JimMinCT United States of America
Saturn Ambassador
Articles: 0
Offline
Posts: 393
Joined: Tue May 07, 2019 10:24 pm
4
Location: Ct
Status:
Offline

TSS Awards Badges

TSS Photo of the Day

Re: new lathe project

#27

Post by JimMinCT »


Very nice!
Great job!
OTA's: Kson 1026-C, 4" Carbon Fiber ED Refractor, Home-built, 6.1", f/2.? APO refractor... (In Progress) 8" Meade LX2 SCT Mounts: CGX Imaging: ZWO ASI 1600MM, Canon 550D (T2i) Software: PixInsight, APT, PHD2, SharpCap, SGP, Stellarium, Registax, Stuff: Astro-Tech 0.8x FR/FF, Hotech SCA FF, ZWO 7nm 31mm LRGB-SHO filter set, ZWO 8 position EFWObsy: "Maybe Spaceship" Observatory
Image
User avatar
JimMinCT United States of America
Saturn Ambassador
Articles: 0
Offline
Posts: 393
Joined: Tue May 07, 2019 10:24 pm
4
Location: Ct
Status:
Offline

TSS Awards Badges

TSS Photo of the Day

Re: new lathe project

#28

Post by JimMinCT »


What lathe are you using?
I've been puttering around with a Grizzly G0602 10x22 now for a few weeks and love it. (No DRO's on my machine yet, though...)
https://www.grizzly.com/products/Grizzl ... athe/G0602
I'm looking into the upgrades for it and studying YouTube channels for tips.

I have a small scale model of a scope and mount I'm working on... I'll put up a pic or two when i get home from work today.
Very nice job on the tilt ring!
I need to get some material for that project.
Cheers!
OTA's: Kson 1026-C, 4" Carbon Fiber ED Refractor, Home-built, 6.1", f/2.? APO refractor... (In Progress) 8" Meade LX2 SCT Mounts: CGX Imaging: ZWO ASI 1600MM, Canon 550D (T2i) Software: PixInsight, APT, PHD2, SharpCap, SGP, Stellarium, Registax, Stuff: Astro-Tech 0.8x FR/FF, Hotech SCA FF, ZWO 7nm 31mm LRGB-SHO filter set, ZWO 8 position EFWObsy: "Maybe Spaceship" Observatory
Image
User avatar
yobbo89 Australia
Moderator
Moderator
Articles: 0
Offline
Posts: 2560
Joined: Sat May 11, 2019 7:44 pm
4
Location: australia qld brisbane
Status:
Offline

TSS Photo of the Day

Re: new lathe project

#29

Post by yobbo89 »


JimMinCT wrote: Mon Oct 07, 2019 11:43 am What lathe are you using?
I've been puttering around with a Grizzly G0602 10x22 now for a few weeks and love it. (No DRO's on my machine yet, though...)
https://www.grizzly.com/products/Grizzl ... athe/G0602
I'm looking into the upgrades for it and studying YouTube channels for tips.

I have a small scale model of a scope and mount I'm working on... I'll put up a pic or two when i get home from work today.
Very nice job on the tilt ring!
I need to get some material for that project.
Cheers!
This is the lathe I have, opti is the brand name, I think it's made in Taiwan and may be a German company , it's an alright cheap lathe, does left and right hand thread, metric and imperial, no auto crossfeed. I think it's about the same size as yours.

https://www.machineryhouse.com.au/L689
Attachments
Main.jpg
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .

Image
bailey hudson
Earth Ambassador
Articles: 0
Offline
Posts: 2
Joined: Thu Dec 12, 2019 7:20 pm
4
Location: Oklahoma
Status:
Offline

Re: new lathe project

#30

Post by bailey hudson »


Oh wow See this is why I joined this forum.
Hi everyone! I'm new here and these are just great reads.
My family has owned a lathe for years now from SummitMT https://www.summitmt.com/. We have the 14x40 manual lathe.
When I was a kid my dad and I would usually spend an entire afternoon just tinkering in our shed.
And last year I started doing my own projects with ideas I got from this site - https://www.summitmt.com/metal-lathe-projects/ and also some from youtube videos.
I actually tried doing the ring and well it came out alright.
But seeing this and knowing that I can also do parts of a scope from the equipment I have is amazing!
I'll have to try this one for myself and share photos with everyone.
Thanks guys.
User avatar
goldstar
Jupiter Ambassador
Articles: 0
Online
Posts: 291
Joined: Sat May 11, 2019 6:40 pm
4
Location: New York State
Status:
Online

Re: new lathe project

#31

Post by goldstar »



Ok, so not a metal lathe but it's probably the only way I can have anything similar.
I got to use just such a device many years ago (no, I am not that old!) and enjoyed using it and with some success.
The immediacy, tactile and visual feedback of the process was astonishing and very fulfilling.
I made a stool leg in minutes.
Just wait until the lights go out!
Scopes: 200mm f6 DOB:CR 6 150 mm f 7.5 refractor, SW ED 80 mm f 7.5. 2 X 80 mm f7.5 guides.
Mount: AVX.
NexGuide auto guider. Cameras 3 Ti and XS modded. I optron Skytracker.
Motley EP collection.
User avatar
helicon United States of America
Co-Administrator
Co-Administrator
Articles: 584
Online
Posts: 12274
Joined: Mon May 06, 2019 1:35 pm
4
Location: Washington
Status:
Online

TSS Awards Badges

Re: new lathe project

#32

Post by helicon »


Very nice work with the lathe! My experience with lathes amounts to making a clock out of a slab of redwood back in Middle School wood shop, e.g. very limited.
-Michael
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
User avatar
yobbo89 Australia
Moderator
Moderator
Articles: 0
Offline
Posts: 2560
Joined: Sat May 11, 2019 7:44 pm
4
Location: australia qld brisbane
Status:
Offline

TSS Photo of the Day

Re: new lathe project

#33

Post by yobbo89 »


goldstar wrote: Thu Dec 12, 2019 8:37 pm
Ok, so not a metal lathe but it's probably the only way I can have anything similar.
I got to use just such a device many years ago (no, I am not that old!) and enjoyed using it and with some success.
The immediacy, tactile and visual feedback of the process was astonishing and very fulfilling.
I made a stool leg in minutes.
Just wait until the lights go out!
it looks like it machines as fast as a modern wood lathe !
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .

Image
User avatar
yobbo89 Australia
Moderator
Moderator
Articles: 0
Offline
Posts: 2560
Joined: Sat May 11, 2019 7:44 pm
4
Location: australia qld brisbane
Status:
Offline

TSS Photo of the Day

Re: new lathe project

#34

Post by yobbo89 »


This project has actually been on hold because off my new telescope mount, i expect it to be done in the upcoming weeks , all i need is some pc thumb screws and a bit of paint.i'll update when completed and keep posting for new projects.
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .

Image
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

Return to “Other "Do It Yourself" projects”