Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
My GPS module is not timing in; in other words, going from ON to OK after power is applied. Cycling power has no effect. Google says I need to remove the GPS cover and jiggle the wires. Does anyone know where this GPS cover is on the CEM70G mount?
Searching for this cover on Google is not getting me anywhere.
JT ∞ Primary Scopes: #1: Celestron CPC1100 #2: 8" f/7.5 Dob #3: CR150HD f/8 6" frac ∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO ∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5 ∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros. ∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000 ∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Plus a Canon T3i, an Orion SSAG, and 3 WYZE Cam3 ∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter ∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
If you stand behind the Mount, the GPS is under a small rectangular plastic cover on the left lower side of the mount.
The Cem70 is well known for its connector problems.
And it is getting worse the older the mount gets. I had plenty of issues, lost connection to the Ioptron Commander, lost connection to the built in guide scope, lost connection to the GPS and so on.
Beginning off last year, I took the whole mount apart, cleaned all connectors with Caig Labs DoxIt and res-olderd all connectors on the boards ( and when I say "ALL ", I really mean it ) .
Since then, I don not ran into a single problem again.