Orion Finder needs rubber ring
- johnyjf
- Earth Ambassador
- Articles: 0
- Posts: 28
- Joined: Wed Aug 28, 2019 11:42 am
- 4
- Location: Reading UK
- Status:
Offline
Orion Finder needs rubber ring
I have an Orion right angle right image finder which uses the usual combination of 3 screws and a rubber ring to locate the Optical tube and enable the viewing direction to be adjusted, The rubber ring is disintegrating most probably due to age. Does anyone have a recommendation for a replacement? the finder is in VGC otherwise and I would like to be able to use it properly. Thanks for any inputs!
- Lady Fraktor
- Infinity and Beyond Ambassador
- Articles: 0
- Posts: 10018
- Joined: Mon Apr 29, 2019 9:14 pm
- 5
- Location: Slovakia
- Status:
Offline
Re: Orion Finder needs rubber ring
Plumbing section of the local hardware shop will have various diameter/ thickness rubber o-rings.
Take your old one along and match it.
Hardware and craft shops are great astro accessory outlets
Take your old one along and match it.
Hardware and craft shops are great astro accessory outlets
Gabrielle
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1000101)
The only culture I have is from yogurt
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1000101)
The only culture I have is from yogurt
- Bigzmey
- Moderator
- Articles: 8
- Posts: 7716
- Joined: Sat May 11, 2019 7:55 pm
- 4
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: Orion Finder needs rubber ring
I would check hardware stores first as Lady Fraktor suggested.
Agena has it, but with shipping to UK that would a one expensive o-ring!
https://agenaastro.com/agena-rubber-o-r ... nders.html
Agena has it, but with shipping to UK that would a one expensive o-ring!
https://agenaastro.com/agena-rubber-o-r ... nders.html
Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
- JayTee
- Universal Ambassador
- Articles: 2
- Posts: 5651
- Joined: Thu Apr 25, 2019 3:23 am
- 5
- Location: Idaho, USA
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
Re: Orion Finder needs rubber ring
Maybe they have these or other similar products on the UK Amazon.
∞ Primary Scopes: #1: Celestron CPC1100 #2: 8" f/7.5 Dob #3: CR150HD f/8 6" frac
∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO
∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5
∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros.
∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3
∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter
∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO
∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5
∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros.
∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3
∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter
∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
- pakarinen
- Inter-Galactic Ambassador
- Articles: 0
- Posts: 4037
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: Orion Finder needs rubber ring
The O-ring on my Orion finder slipped down the tube. I never noticed it was out of place - didn't cause a problem that I could see. YMMV.
But I also use regular cap head screws with a bit of duck tape to protect tubes instead of buying nylon-tipped screws, so I am a barbarian.
But I also use regular cap head screws with a bit of duck tape to protect tubes instead of buying nylon-tipped screws, so I am a barbarian.
=============================================================================
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- Richard
- Milky Way Ambassador
- Articles: 0
- Posts: 1165
- Joined: Mon May 13, 2019 6:55 am
- 4
- Location: South Africa/Czech Rep
- Status:
Offline
Re: Orion Finder needs rubber ring
If the old one has disintegrated just take the finder to the hardware or hobby shop, failing that an elastic band does the job
Reflectors GSO 200 Dobs
Refractors None
SCT C5 on a SLT mount
Mak 150 Bosma on a EQ5
Refractors None
SCT C5 on a SLT mount
Mak 150 Bosma on a EQ5
- Piet Le Roux
- Jupiter Ambassador
- Articles: 0
- Posts: 284
- Joined: Mon May 13, 2019 6:33 pm
- 4
- Location: Bloemfontein, South Africa
- Status:
Offline
-
TSS Photo of the Day
Re: Orion Finder needs rubber ring
To get a rubber o-ring that fits perfectly on the finder scope of a Star Watcher that I had I took the finder scope to a shop that specialises in o-rings, I gave it to the lady and explained that it must fit in the grove around the finder and be about 2mm thick, she measured it and came back with a perfect fit!
Main Equipment : Tele Vue 27mm Panoptic, 7&13mm Nagler, Big Barlow : 8" Meade LX90ACF with Meade 2.0" Enhanced Diagonal : Camera Fuji XT100
- johnyjf
- Earth Ambassador
- Articles: 0
- Posts: 28
- Joined: Wed Aug 28, 2019 11:42 am
- 4
- Location: Reading UK
- Status:
Offline
Re: Orion Finder needs rubber ring
Thanks for all your replies, there are several useful suggestion here, I'll let you know how I get on!
- johnyjf
- Earth Ambassador
- Articles: 0
- Posts: 28
- Joined: Wed Aug 28, 2019 11:42 am
- 4
- Location: Reading UK
- Status:
Offline
Re: Orion Finder needs rubber ring
I found an equivalent of the Agena ring on eBay and have ordered a pack of 2. If any good I'll post the link.
- johnyjf
- Earth Ambassador
- Articles: 0
- Posts: 28
- Joined: Wed Aug 28, 2019 11:42 am
- 4
- Location: Reading UK
- Status:
Offline
Re: Orion Finder needs rubber ring
I fitted the new rubber ring last night and it appears to be just the job. You can ind hem at https://www.ebay.co.uk/itm/185308019712 ... 3182103114. Clear skies to all!
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute