Making a new solar filter for my ED80 refractor

Tell us about those other projects you are working on.
Post Reply
User avatar
OzEclipse Australia
Milky Way Ambassador
Articles: 2
Offline
Posts: 1754
Joined: Sat May 11, 2019 8:11 am
3
Location: Young, NSW, Australia, 34S, 148E
Status:
Offline

TSS Awards Badges

TSS Photo of the Day

Making a new solar filter for my ED80 refractor

#1

Post by OzEclipse »


Some of you will have had me respond to your posts about solar filters by pointing you to an article on my website about constructing a holder for thin film solar filter.
https://joe-cali.com/eclipses/EQUIPMENT ... lters.html

After 19 years, I found a pinhole in the Baader Astrosolar filter I made in 2004 for my ED80. Time to make a new one. I could have simple made a new filter sandwich and kept the old flange for the tube but I decided to try something different. I found some pieces of clear anodised 1mm thick 150mm wide aluminium sheet in an engineering shop scrap bin (bonus). I put two 5mm edge bends on it then cut it on a table saw to 140x140mm squares.

Metal plates.JPG


Next I cut two sheets of self-adhesive foam core sheet to fit exactly inside the bent metal sheet. I cut two 116mm holes that were a tight fit so that this flange fits neat and very tight over the lens hood. Once on it takes considerable force to remove it so no accidental blow offs.

Foamcore well.jpg
.

filter on ED80 lens hood.JPG



The 76mm/3 inch hole is a few mm smaller than the objective's 80mm aperture. As a result I am getting a little vignetting but nothing that can't be handled.
vignetting.jpg



Filter on ED 80.JPG
.


I used the two circular cutouts to make a circular filter sandwich. One self adhesive circular piece is stuck to the aluminium piece, the Astrosolar film is sandwiched between this piece and the second piece. The filter material is now recessed about 1/4 inch 6mm from either surface. This protects it from accidental damage even if dropped unless it’s dropped onto a sharp object.
Here is the filter on the ED80
Filter on scope.jpg
.

And here is the filter and holder bundled up and safe with covers over both sides of the filter. Ready to be packed for travel to next months total eclipse.
Travel bundle.jpg
Joe
Image
Amateur astronomer since 1978...................Web site : http://joe-cali.com/
Scopes: ATM 18" Dob, Vixen VC200L, ATM 6"f7, Saxon ED80, WO M70 ED, Orion 102 Maksutov, ST80.
Mounts: Takahashi EM-200, iOptron iEQ45, Push dobsonian with Nexus DSC, three homemade EQ's.
Eyepieces: TV Naglers 31, 17, 12, 7; Denkmeier D21 & D14; Pentax XW10, XW5, Unitron 40mm Kellner, Meade Or 25,12
Cameras : Pentax K1, K5, K01, K10D / VIDEO CAMS : TacosBD, Lihmsec.
Cam/guider/controllers: Lacerta MGEN 3, SW Synguider, Simulation Curriculum SkyFi 3+Sky safari
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

Return to “Other "Do It Yourself" projects”