Hi, so I decided to add some
RGB and more L data to what I had.
RGB was 10x 3min each binned 2x2 and the L was a total of 19x 3min at binning 1x1. Total just under 2.5 hours of exposure time. Processed in PixInsight with Flats, MFD's and Darks (No BIAS!!, not needed for a
CMOS). Didn't do anything too fancy with Noise reduction just some ACDNR with a Lightness mask. Tried a Masked stretch on the
RGB but didn't come out well so just did a manual Histogram stretch.
Ideally this needs some
HA data and a fair bit more of the LRGB to really pop, but its pretty solid so far.
Clear Skies
Paul
Website
https://astro.bambury.ca Scope: Takahashi FSQ106DX4, Teleskop Service 12 inch Truss Tube RC -- Mount: Bisque PMX+ -- Camera: QHY268 mono, ATIK383L+ mono, SBIG STi, ZWO120mm-s, ZWO178MC