Need help with EdgeHD11 and focus motor
- ic_1101
- Orion Spur Ambassador
- Articles: 0
- Posts: 968
- Joined: Sat May 11, 2019 1:19 pm
- 4
- Location: Canada
- Status:
Offline
-
TSS Photo of the Day
Need help with EdgeHD11 and focus motor
Hope someone can help with my problem as I’m at my wits end.
I have an EdgeHD11 with a Celestron focus motor installed. The imaging train consists of the EdgeHD11 reducer, Esatto2 focuser, qhyoag, filter drawer and the qhy268c for a back focus of exactly 147mm.
I calibrated the celestron focus motor and it showed 30800 steps (their focuser control software seems to imply that there are 60000 steps). I had no issue the past month achieving focus although it was at the upper limit of the celestron focuser travel (29000-30500) but now that things are warming up I can’t achieve focus as it runs out of travel at 30800 steps.
The only way I can focus is to increase my back focus distance of 147mm with the Esatto2 focuser which of course plays havoc with the stars.
Am I missing something here? Should the focus motor calibrate to 60000 and if so how?
Really appreciate any help.
I have an EdgeHD11 with a Celestron focus motor installed. The imaging train consists of the EdgeHD11 reducer, Esatto2 focuser, qhyoag, filter drawer and the qhy268c for a back focus of exactly 147mm.
I calibrated the celestron focus motor and it showed 30800 steps (their focuser control software seems to imply that there are 60000 steps). I had no issue the past month achieving focus although it was at the upper limit of the celestron focuser travel (29000-30500) but now that things are warming up I can’t achieve focus as it runs out of travel at 30800 steps.
The only way I can focus is to increase my back focus distance of 147mm with the Esatto2 focuser which of course plays havoc with the stars.
Am I missing something here? Should the focus motor calibrate to 60000 and if so how?
Really appreciate any help.
Alex
Scope: SW Esprit 120ED, Askar FRA300
Mount: ZWO AM5
Cameras: QHY268M/C, QHY183M/C, ASI290MM
Software: Pixinsight, AstroPixelProcessor, SGP
Observatory: Exploradome with Nexdome rotator
https://www.astrobin.com/users/ic_1101/
Scope: SW Esprit 120ED, Askar FRA300
Mount: ZWO AM5
Cameras: QHY268M/C, QHY183M/C, ASI290MM
Software: Pixinsight, AstroPixelProcessor, SGP
Observatory: Exploradome with Nexdome rotator
https://www.astrobin.com/users/ic_1101/
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute