Re-converted my Z12

Discuss making your own telescope!
Post Reply
User avatar
SkyHiker United States of America
Local Group Ambassador
Articles: 0
Online
Posts: 2293
Joined: Sat May 11, 2019 8:40 pm
4
Location: Santa Barbara, CA
Status:
Online

TSS Awards Badges

TSS Photo of the Day

Re-converted my Z12

#1

Post by SkyHiker »


I had converted my Z12 to a collapsible using carbon fiber poles a couple years ago. I was never really happy about it because it was a bit bulky and the balance was off due to the loss of a piece of metal tube. Also, the struts were fastened with 6 small screws which was not ideal to say the least.

This weekend I replaced the carbon fiber poles with square aluminum trusses, replaced the tube with a smaller section of the part that I had taken out last time, fixed the balance and shortened the base by 2 inches. This should make it much easier to put in the car and take to star parties. The fasteners are now a bunch of wing nuts, much easier to use than the old system. The balance and focus are perfect. I drilled some extra holes for AP to push the focal plane further out.

I tried it tonight, it works great. It takes about 4 seconds for the image to settle after a bump but that's OK. I know it's because I attached the struts straight on the tube and did not add wooden rings for stiffness. It doesn't bother me so I'm happy.

Oh and I cleaned the mirror too while I was at it.
IMG_0972_small.jpg
IMG_0971_small.jpg
... Henk. :D Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
User avatar
helicon United States of America
Co-Administrator
Co-Administrator
Articles: 585
Online
Posts: 12279
Joined: Mon May 06, 2019 1:35 pm
4
Location: Washington
Status:
Online

TSS Awards Badges

Re: Re-converted my Z12

#2

Post by helicon »


Nice work Henk. Sounds like a real pleasure to use.
-Michael
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
User avatar
SkyHiker United States of America
Local Group Ambassador
Articles: 0
Online
Posts: 2293
Joined: Sat May 11, 2019 8:40 pm
4
Location: Santa Barbara, CA
Status:
Online

TSS Awards Badges

TSS Photo of the Day

Re: Re-converted my Z12

#3

Post by SkyHiker »


helicon wrote: Wed Jul 07, 2021 8:19 pm Nice work Henk. Sounds like a real pleasure to use.
Thanks Michael. It's much better now, I just deal with 3 wingnuts mostly. It is now more of a truss design than a collapsible because the aluminum poles are longer than what one would choose for a collapsible. The Z12 is great but in its original form it takes up 3 car seats. After my first conversion it took up 3/4 car seat and it was a hassle laying it down on its side. Now it should fit straight up if I put the top plus trusses in the trunk. I can remove the trusses from the top as well if I run short on space.

In retrospect of course I should have got the Skywatcher 12" collapsible, it would have saved me a bunch of work. I could not resist getting the Z12 for $630, its price it back in the days when they were competing to push Apertura out of business.
... Henk. :D Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
User avatar
Ylem United States of America
Universal Ambassador
Articles: 0
Offline
Posts: 7477
Joined: Sun May 12, 2019 2:54 am
4
Location: Ocean County, New Jersey
Status:
Offline

TSS Photo of the Day

Re: Re-converted my Z12

#4

Post by Ylem »


Sweet rig 😁
Clear Skies,
-Jeff :telescopewink:


Member; ASTRA-NJ



Orion 80ED
Celestron C5, 6SE, Celestar 8
Vixen Porta Mount ll
Coronado PST
A big box of Plossls
Little box of filters
:D



User avatar
notFritzArgelander
In Memory
In Memory
Articles: 0
Offline
Posts: 14925
Joined: Fri May 10, 2019 4:13 pm
4
Location: Idaho US
Status:
Offline

TSS Awards Badges

Re: Re-converted my Z12

#5

Post by notFritzArgelander »


Good for you. I'm thinking through a process for compactifying my own Z12.
Scopes: Refs: Orion ST80, SV 80EDA f7, TS 102ED f11 Newts: AWB 130mm, f5, Z12 f5; Cats: VMC110L, Intes MK66,VMC200L f9.75 EPs: KK Fujiyama Orthoscopics, 2x Vixen NPLs (40-6mm) and BCOs, Baader Mark IV zooms, TV Panoptics, Delos, Plossl 32-8mm. Mixed brand Masuyama/Astroplans Binoculars: Nikon Aculon 10x50, Celestron 15x70, Baader Maxbright. Mounts: Star Seeker IV, Vixen Porta II, Celestron CG5
User avatar
KingNothing13 United States of America
Moderator
Moderator
Articles: 0
Offline
Posts: 1712
Joined: Wed Jun 19, 2019 4:54 pm
4
Location: Western Mass
Status:
Offline

TSS Awards Badges

Re: Re-converted my Z12

#6

Post by KingNothing13 »


Good job Henk - does it have a significant weight loss?
-- Brett

Scope: Apertura AD10 with Nexus II with 8192/716000 Step Encoders
EPs: ES 82* 18mm, 11mm, 6.7mm; GSO 30mm
Celestron SkyMaster 15x70 Binoculars
List Counts: Messier: 75; Herschel 400: 30; Caldwell: 12; AL Carbon Star List: 16
Brett's Carbon Star Hunt

Image
User avatar
SkyHiker United States of America
Local Group Ambassador
Articles: 0
Online
Posts: 2293
Joined: Sat May 11, 2019 8:40 pm
4
Location: Santa Barbara, CA
Status:
Online

TSS Awards Badges

TSS Photo of the Day

Re: Re-converted my Z12

#7

Post by SkyHiker »


KingNothing13 wrote: Thu Jul 08, 2021 12:04 am Good job Henk - does it have a significant weight loss?
The base is now 15 kg, the tube 19 kg. That's about 75 US lbs. Hmm that's still the regular weight. Maybe my scale was off because the aluminum struts should weigh less than the piece of steel tube that I took out but not by a whole lot. Weight was not ghe main goal, size was. It indeed fits on the back seat straight up.
... Henk. :D Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
User avatar
KingNothing13 United States of America
Moderator
Moderator
Articles: 0
Offline
Posts: 1712
Joined: Wed Jun 19, 2019 4:54 pm
4
Location: Western Mass
Status:
Offline

TSS Awards Badges

Re: Re-converted my Z12

#8

Post by KingNothing13 »


SkyHiker wrote: Thu Jul 08, 2021 3:45 am
KingNothing13 wrote: Thu Jul 08, 2021 12:04 am Good job Henk - does it have a significant weight loss?
The base is now 15 kg, the tube 19 kg. That's about 75 US lbs. Hmm that's still the regular weight. Maybe my scale was off because the aluminum struts should weigh less than the piece of steel tube that I took out but not by a whole lot. Weight was not ghe main goal, size was. It indeed fits on the back seat straight up.
Ahh, I see - that makes sense.

I don't have a problem with the weight or size of my AD10 - but I am not getting any younger (sadly).
-- Brett

Scope: Apertura AD10 with Nexus II with 8192/716000 Step Encoders
EPs: ES 82* 18mm, 11mm, 6.7mm; GSO 30mm
Celestron SkyMaster 15x70 Binoculars
List Counts: Messier: 75; Herschel 400: 30; Caldwell: 12; AL Carbon Star List: 16
Brett's Carbon Star Hunt

Image
User avatar
SkyHiker United States of America
Local Group Ambassador
Articles: 0
Online
Posts: 2293
Joined: Sat May 11, 2019 8:40 pm
4
Location: Santa Barbara, CA
Status:
Online

TSS Awards Badges

TSS Photo of the Day

Re: Re-converted my Z12

#9

Post by SkyHiker »


At nFA's request, here are more detailed pictures some with a tape measure so it can be used to perform similar surgery:

Mirror section:
IMG_1082_small.jpg
Side view to get an idea of the clearance (I believe the alt bearings are at the lowest position), with a strut hole to the right.
IMG_1083_small.jpg
The center part that was cut out.
IMG_1086_small.jpg
A strut, square from ACE. Square struts have the advantage of being flush with the tube so they can be fixed much better than a round strut, using wingnuts. The 2nd hole from the top was a mistake (not used). The bottom hole is for regular viewing, the one above it is for AP (to get the focal plane out far enough).
IMG_1087_small.jpg
Bolt with wingnut, inner scraggly keep-in-place washer (don't know the name), Belleville washer for tensioning. The bolt is 5/8" x 1.5" IIRC.
IMG_1093_small.jpg
Top view. Note that the struts are not placed in an equilateral triangle because they have to have clearance around the Alt bearings.
IMG_1095_small.jpg
Focuser section.
IMG_1097_small.jpg
I hope this makes it clear enough. It's a pretty rough conversion but it works. Note that the tube ends that were cut are bare so you can cut yourself on it. I intend to put some trim on it, some day.

It is best to mark the struts and the holes with colored tape (different colors, to be clear) so you know which one goes where.

The weight distribution is such that the Alt bearings must be in the lowest position. I had been thinking about moving the bearings 1" down so the bearing position can be 1" higher so they are not in the extreme position anymore. But there is no need, this works.

I am not going to advise how to drill the holes such that everything is straight and vertical. If you don't know how to do that then maybe this is not for you. I did it in place, used painter's tape IIRC, just some simple tricks but this has to be done with care of course.
Attachments
IMG_1094_small.jpg
... Henk. :D Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
User avatar
helicon United States of America
Co-Administrator
Co-Administrator
Articles: 585
Online
Posts: 12279
Joined: Mon May 06, 2019 1:35 pm
4
Location: Washington
Status:
Online

TSS Awards Badges

Re: Re-converted my Z12

#10

Post by helicon »


Thanks for the update. I probably could do something similar with the Z10, though it's not so heavy and for now, the tube fits in the backseat of my SUV.
-Michael
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
User avatar
SkyHiker United States of America
Local Group Ambassador
Articles: 0
Online
Posts: 2293
Joined: Sat May 11, 2019 8:40 pm
4
Location: Santa Barbara, CA
Status:
Online

TSS Awards Badges

TSS Photo of the Day

Re: Re-converted my Z12

#11

Post by SkyHiker »


helicon wrote: Fri Jul 15, 2022 12:32 pm Thanks for the update. I probably could do something similar with the Z10, though it's not so heavy and for now, the tube fits in the backseat of my SUV.
Very true, I could do the same with my 10" Coulter Odyssey - no conversion needed, and the views from a 10" are not a whole lot worse. So maybe I should never have got that Z12, I could just not pass it up when it was on sale for $630 when Zhumell was running Apertura into the ground. The difficulty of handling a scope goes up with the cube of the diameter while the views only go up with the square! Oh well it gave me something to do.
... Henk. :D Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
User avatar
Bigzmey United States of America
Moderator
Moderator
Articles: 8
Online
Posts: 7550
Joined: Sat May 11, 2019 7:55 pm
4
Location: San Diego, CA USA
Status:
Online

TSS Awards Badges

Re: Re-converted my Z12

#12

Post by Bigzmey »


Nice mod Henk!
Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.

Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2382, Comets: 34, Asteroids: 255
User avatar
Makuser United States of America
In Memory
In Memory
Articles: 0
Offline
Posts: 6394
Joined: Mon May 06, 2019 12:53 am
4
Location: Rockledge, FL.
Status:
Offline

TSS Awards Badges

TSS Photo of the Day

Re: Re-converted my Z12

#13

Post by Makuser »


Hi Henk. Sorry to come in late. You did a wonderful job on your Z12 conversion and upgrades. This is some great craftsmanship on your part. And, I agree with your analysis about the scope diameter; "The difficulty of handling a scope goes up with the cube of the diameter while the views only go up with the square!" My largest telescope which gives me fantastic views is my XT12i. However, over the years as I age, it seems to be getting heavier and I now need help to carefully get it out and use. Thanks for this wonderful report and the excellent photos about your Z12 handy work Henk and the best of regards.
Marshall
Sky-Watcher 90mm f/13.8 Maksutov-Cassegrain on motorized Multimount
Orion Astroview 120ST f/5 Refractor on EQ3 mount
Celestron Comet Catcher 140mm f/3.64 Schmidt-Newtonian on alt-az mount
Celestron Omni XLT150R f/5 Refractor on CG4 mount with dual axis drives.
Orion 180mm f/15 Maksutov-Cassegrain on CG5-GT Goto mount.
Orion XT12i 12" f/4.9 Dobsonian Intelliscope.
Kamakura 7x35 Binoculars and Celestron SkyMaster 15x70 Binoculars. ZWO ASI 120MC camera.
>)))))*>
User avatar
notFritzArgelander
In Memory
In Memory
Articles: 0
Offline
Posts: 14925
Joined: Fri May 10, 2019 4:13 pm
4
Location: Idaho US
Status:
Offline

TSS Awards Badges

Re: Re-converted my Z12

#14

Post by notFritzArgelander »


@SkyHiker how large a hacksaw do you recommend? What size did you use?
Scopes: Refs: Orion ST80, SV 80EDA f7, TS 102ED f11 Newts: AWB 130mm, f5, Z12 f5; Cats: VMC110L, Intes MK66,VMC200L f9.75 EPs: KK Fujiyama Orthoscopics, 2x Vixen NPLs (40-6mm) and BCOs, Baader Mark IV zooms, TV Panoptics, Delos, Plossl 32-8mm. Mixed brand Masuyama/Astroplans Binoculars: Nikon Aculon 10x50, Celestron 15x70, Baader Maxbright. Mounts: Star Seeker IV, Vixen Porta II, Celestron CG5
User avatar
SkyHiker United States of America
Local Group Ambassador
Articles: 0
Online
Posts: 2293
Joined: Sat May 11, 2019 8:40 pm
4
Location: Santa Barbara, CA
Status:
Online

TSS Awards Badges

TSS Photo of the Day

Re: Re-converted my Z12

#15

Post by SkyHiker »


notFritzArgelander wrote: Thu Jul 21, 2022 5:07 am @SkyHiker how large a hacksaw do you recommend? What size did you use?
I used a jigsaw IIRC. Easy to control and to make it go straight mark the cutting line with painter's tape.
... Henk. :D Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
User avatar
notFritzArgelander
In Memory
In Memory
Articles: 0
Offline
Posts: 14925
Joined: Fri May 10, 2019 4:13 pm
4
Location: Idaho US
Status:
Offline

TSS Awards Badges

Re: Re-converted my Z12

#16

Post by notFritzArgelander »


SkyHiker wrote: Thu Jul 21, 2022 6:30 am
notFritzArgelander wrote: Thu Jul 21, 2022 5:07 am @SkyHiker how large a hacksaw do you recommend? What size did you use?
I used a jigsaw IIRC. Easy to control and to make it go straight mark the cutting line with painter's tape.
Quite so. I misremembered hacksaw instead of jigsaw as you posted on the other thread. I need to check about availability I think. I think I just might have one lying about.
Scopes: Refs: Orion ST80, SV 80EDA f7, TS 102ED f11 Newts: AWB 130mm, f5, Z12 f5; Cats: VMC110L, Intes MK66,VMC200L f9.75 EPs: KK Fujiyama Orthoscopics, 2x Vixen NPLs (40-6mm) and BCOs, Baader Mark IV zooms, TV Panoptics, Delos, Plossl 32-8mm. Mixed brand Masuyama/Astroplans Binoculars: Nikon Aculon 10x50, Celestron 15x70, Baader Maxbright. Mounts: Star Seeker IV, Vixen Porta II, Celestron CG5
User avatar
SkyHiker United States of America
Local Group Ambassador
Articles: 0
Online
Posts: 2293
Joined: Sat May 11, 2019 8:40 pm
4
Location: Santa Barbara, CA
Status:
Online

TSS Awards Badges

TSS Photo of the Day

Re: Re-converted my Z12

#17

Post by SkyHiker »


Any postive news nFA, or total destruction? I'm curious how things worked out.
... Henk. :D Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
User avatar
notFritzArgelander
In Memory
In Memory
Articles: 0
Offline
Posts: 14925
Joined: Fri May 10, 2019 4:13 pm
4
Location: Idaho US
Status:
Offline

TSS Awards Badges

Re: Re-converted my Z12

#18

Post by notFritzArgelander »


SkyHiker wrote: Tue Aug 02, 2022 2:50 pm Any postive news nFA, or total destruction? I'm curious how things worked out.
Things are moving at glacial pace. The only positive news is that I’ve located my jigsaw. But I’m still mulling over conversion trade offs between a metal tube truss and a wood work collapsible. I’m still dealing with the aftermath of my plumbing problems.
Scopes: Refs: Orion ST80, SV 80EDA f7, TS 102ED f11 Newts: AWB 130mm, f5, Z12 f5; Cats: VMC110L, Intes MK66,VMC200L f9.75 EPs: KK Fujiyama Orthoscopics, 2x Vixen NPLs (40-6mm) and BCOs, Baader Mark IV zooms, TV Panoptics, Delos, Plossl 32-8mm. Mixed brand Masuyama/Astroplans Binoculars: Nikon Aculon 10x50, Celestron 15x70, Baader Maxbright. Mounts: Star Seeker IV, Vixen Porta II, Celestron CG5
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

Return to “ATM”