Is this safe way to carry a mount?

We all started somewhere! We are a friendly bunch! Most of your questions can be posted here, but if you are interested in Astrophotography please use the new Beginner Astrophotography forum. The response time will be much better.
User avatar
turboscrew
Inter-Galactic Ambassador
Articles: 0
Offline
Posts: 3233
Joined: Sat Jun 20, 2020 9:22 am
3
Location: Nokia, Finland
Status:
Offline

TSS Awards Badges

Is this safe way to carry a mount?

#1

Post by turboscrew »


Is this a safe way, or could that break something?
Gears OFF, locks ON. Without the counterweight bar and Tri-pier, of course.
carrying.jpg
- Juha

Senior Embedded SW Designer
Telescope: OrionOptics XV12, Mount: CEM120, Tri-pier 360 and alternative dobson mount.
Grab 'n go: Omegon AC 102/660 on AZ-3 mount
Eyepieces: 26 mm Omegon SWAN 70°, 15 mm TV Plössl, 12.5 mm Baader Morpheus, 10 mm TV Delos, 6 mm Baader Classic Ortho, 5 mm TV DeLite, 4 mm and 3 mm TV Radians
Cameras: ZWO ASI 294MM Pro, Omegon veLOX 178C
OAG: TS-Optics TSOAG09, ZWO EFW 7 x 36 mm, ZWO filter sets: LRGB and Ha/OIII/SII
Explore Scientific HR 2" coma corrector, Meade x3 1.25" Barlow, TV PowerMate 4x 2"
Some filters (#80A, ND-96, ND-09, Astronomik UHC)
Laptop: Acer Enduro Urban N3 semi-rugged, Windows 11
LAT 61° 28' 10.9" N, Bortle 5

I don't suffer from insanity. I'm enjoying every minute of it.

Image
User avatar
Lady Fraktor Slovakia
Co-Administrator
Co-Administrator
Articles: 0
Offline
Posts: 9860
Joined: Mon Apr 29, 2019 9:14 pm
4
Location: Slovakia
Status:
Offline

Re: Is this safe way to carry a mount?

#2

Post by Lady Fraktor »


Do not carry a EQ mount with the locks on as any bumping/ vibrations can jam them on causing damage.
Always transport with the locks off. (allow free movement of all parts)

For lifting I would lift from one axis only so you are not bending the two axis towards each other.
How about a HPRC or Pelican case filled with foam instead for transport?
See Far Sticks: Antares Elita 103/1575, AOM FLT 105/1000, Bresser BV 127/1200, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, AXJ, AXD
Az/Alt: AYO Digi II/ Argo Navis, Stellarvue M2C/ Argo Navis
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Takahashi prism, TAL, Vixen flip mirror
Eyepieces: Antares to Zeiss
The only culture I have is from yogurt
My day was going well until... people
Image
User avatar
Bigzmey United States of America
Moderator
Moderator
Articles: 8
Online
Posts: 7550
Joined: Sat May 11, 2019 7:55 pm
4
Location: San Diego, CA USA
Status:
Online

TSS Awards Badges

Re: Is this safe way to carry a mount?

#3

Post by Bigzmey »


For anything above light duty grab and go mounts I always disconnect the mount from legs for carrying/transporting. If just want to lift and move short distance I grab it by mount base or pier.
Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.

Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2382, Comets: 34, Asteroids: 255
User avatar
turboscrew
Inter-Galactic Ambassador
Articles: 0
Offline
Posts: 3233
Joined: Sat Jun 20, 2020 9:22 am
3
Location: Nokia, Finland
Status:
Offline

TSS Awards Badges

Re: Is this safe way to carry a mount?

#4

Post by turboscrew »


Lady Fraktor wrote: Tue Mar 30, 2021 9:05 pm Do not carry a EQ mount with the locks on as any bumping/ vibrations can jam them on causing damage.
Always transport with the locks off.

For lifting I would lift from one axis only so you are not bending the two axis towards each other.
How about a HPRC or Pelican case filled with foam instead for transport?
Thanks!
I have tried to find big enough case. Haven't found one yet.
The case needs to be 50 cm x 41 cm x 23 cm minimum. Even the biggest Geoptics bag is too small.
There are bigger hard suitcases, but I doubt they can handle 27 kg.
There are bigger boxes, but they tend to be of wrong shape to carry, like 40 cm x 50 cm x 70 cm.
- Juha

Senior Embedded SW Designer
Telescope: OrionOptics XV12, Mount: CEM120, Tri-pier 360 and alternative dobson mount.
Grab 'n go: Omegon AC 102/660 on AZ-3 mount
Eyepieces: 26 mm Omegon SWAN 70°, 15 mm TV Plössl, 12.5 mm Baader Morpheus, 10 mm TV Delos, 6 mm Baader Classic Ortho, 5 mm TV DeLite, 4 mm and 3 mm TV Radians
Cameras: ZWO ASI 294MM Pro, Omegon veLOX 178C
OAG: TS-Optics TSOAG09, ZWO EFW 7 x 36 mm, ZWO filter sets: LRGB and Ha/OIII/SII
Explore Scientific HR 2" coma corrector, Meade x3 1.25" Barlow, TV PowerMate 4x 2"
Some filters (#80A, ND-96, ND-09, Astronomik UHC)
Laptop: Acer Enduro Urban N3 semi-rugged, Windows 11
LAT 61° 28' 10.9" N, Bortle 5

I don't suffer from insanity. I'm enjoying every minute of it.

Image
User avatar
Lady Fraktor Slovakia
Co-Administrator
Co-Administrator
Articles: 0
Offline
Posts: 9860
Joined: Mon Apr 29, 2019 9:14 pm
4
Location: Slovakia
Status:
Offline

Re: Is this safe way to carry a mount?

#5

Post by Lady Fraktor »


HPRC or Pelican cases would take the weight but are expensive though you are guaranteed your equipment will survive.

You did not signify your measurements as WxHxD so am not sure if this would work.
I use HPRC cases for overseas air travel and they have survived considerable abuse by many airlines.

https://www.hprc.it/en/resin-case_hprc2600w.html
See Far Sticks: Antares Elita 103/1575, AOM FLT 105/1000, Bresser BV 127/1200, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, AXJ, AXD
Az/Alt: AYO Digi II/ Argo Navis, Stellarvue M2C/ Argo Navis
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Takahashi prism, TAL, Vixen flip mirror
Eyepieces: Antares to Zeiss
The only culture I have is from yogurt
My day was going well until... people
Image
User avatar
turboscrew
Inter-Galactic Ambassador
Articles: 0
Offline
Posts: 3233
Joined: Sat Jun 20, 2020 9:22 am
3
Location: Nokia, Finland
Status:
Offline

TSS Awards Badges

Re: Is this safe way to carry a mount?

#6

Post by turboscrew »


Bigzmey wrote: Tue Mar 30, 2021 10:29 pm For anything above light duty grab and go mounts I always disconnect the mount from legs for carrying/transporting. If just want to lift and move short distance I grab it by mount base or pier.
CEM120 weights 27 kg and Tri-pier 19 kg. And there are stairs and doors...
- Juha

Senior Embedded SW Designer
Telescope: OrionOptics XV12, Mount: CEM120, Tri-pier 360 and alternative dobson mount.
Grab 'n go: Omegon AC 102/660 on AZ-3 mount
Eyepieces: 26 mm Omegon SWAN 70°, 15 mm TV Plössl, 12.5 mm Baader Morpheus, 10 mm TV Delos, 6 mm Baader Classic Ortho, 5 mm TV DeLite, 4 mm and 3 mm TV Radians
Cameras: ZWO ASI 294MM Pro, Omegon veLOX 178C
OAG: TS-Optics TSOAG09, ZWO EFW 7 x 36 mm, ZWO filter sets: LRGB and Ha/OIII/SII
Explore Scientific HR 2" coma corrector, Meade x3 1.25" Barlow, TV PowerMate 4x 2"
Some filters (#80A, ND-96, ND-09, Astronomik UHC)
Laptop: Acer Enduro Urban N3 semi-rugged, Windows 11
LAT 61° 28' 10.9" N, Bortle 5

I don't suffer from insanity. I'm enjoying every minute of it.

Image
User avatar
turboscrew
Inter-Galactic Ambassador
Articles: 0
Offline
Posts: 3233
Joined: Sat Jun 20, 2020 9:22 am
3
Location: Nokia, Finland
Status:
Offline

TSS Awards Badges

Re: Is this safe way to carry a mount?

#7

Post by turboscrew »


Lady Fraktor wrote: Tue Mar 30, 2021 10:36 pm HPRC or Pelican cases would take the weight but are expensive though you are guaranteed your equipment will survive.
Yes. I happened to find 3 candidates: Peli1610 (~600€), Peli Storm IM2720 (~600€) and HPRC 2710 (~449€).
Now, if I find a seller in Europe... There's one in Finland, but, of course, their web shop is being updated.

Kind of stupid - just for carrying the mount head in and out the house.
- Juha

Senior Embedded SW Designer
Telescope: OrionOptics XV12, Mount: CEM120, Tri-pier 360 and alternative dobson mount.
Grab 'n go: Omegon AC 102/660 on AZ-3 mount
Eyepieces: 26 mm Omegon SWAN 70°, 15 mm TV Plössl, 12.5 mm Baader Morpheus, 10 mm TV Delos, 6 mm Baader Classic Ortho, 5 mm TV DeLite, 4 mm and 3 mm TV Radians
Cameras: ZWO ASI 294MM Pro, Omegon veLOX 178C
OAG: TS-Optics TSOAG09, ZWO EFW 7 x 36 mm, ZWO filter sets: LRGB and Ha/OIII/SII
Explore Scientific HR 2" coma corrector, Meade x3 1.25" Barlow, TV PowerMate 4x 2"
Some filters (#80A, ND-96, ND-09, Astronomik UHC)
Laptop: Acer Enduro Urban N3 semi-rugged, Windows 11
LAT 61° 28' 10.9" N, Bortle 5

I don't suffer from insanity. I'm enjoying every minute of it.

Image
User avatar
Lady Fraktor Slovakia
Co-Administrator
Co-Administrator
Articles: 0
Offline
Posts: 9860
Joined: Mon Apr 29, 2019 9:14 pm
4
Location: Slovakia
Status:
Offline

Re: Is this safe way to carry a mount?

#8

Post by Lady Fraktor »


If you signup for the HPRC newsletter you can receive 15% off your purchase.
At least it would cover most of the VAT charge :)
See Far Sticks: Antares Elita 103/1575, AOM FLT 105/1000, Bresser BV 127/1200, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, AXJ, AXD
Az/Alt: AYO Digi II/ Argo Navis, Stellarvue M2C/ Argo Navis
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Takahashi prism, TAL, Vixen flip mirror
Eyepieces: Antares to Zeiss
The only culture I have is from yogurt
My day was going well until... people
Image
User avatar
Bigzmey United States of America
Moderator
Moderator
Articles: 8
Online
Posts: 7550
Joined: Sat May 11, 2019 7:55 pm
4
Location: San Diego, CA USA
Status:
Online

TSS Awards Badges

Re: Is this safe way to carry a mount?

#9

Post by Bigzmey »


One problem with hard cases that they add extra few kg. This is why for my 9.25" SCT OTA I have decided to go with a sturdy padded bag and not drop it. :lol:
Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.

Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2382, Comets: 34, Asteroids: 255
User avatar
Ruud
Orion Spur Ambassador
Articles: 0
Offline
Posts: 813
Joined: Sun Feb 09, 2020 9:56 pm
4
Location: the Netherlands
Status:
Offline

Re: Is this safe way to carry a mount?

#10

Post by Ruud »


A friend uses a dolly: https://www.astroshop.eu/instruments/as ... r_1_select

His is DIY. He also had to make shallow ramps for either side of the threshold.
7x50 Helios Apollo 8x42 Bresser Everest 73mm f/5.9 WO APO 4" f/5 TeleVue Genesis 6" f/10 Celestron 6SE 0.63x reducer 1.8, 2, 2.5 and 3x Barlows eyepieces from 4.5 to 34mm
User avatar
AntennaGuy United States of America
Milky Way Ambassador
Articles: 0
Offline
Posts: 1409
Joined: Sun May 19, 2019 1:20 am
4
Location: Tyler, TX USA
Status:
Offline

TSS Awards Badges

Re: Is this safe way to carry a mount?

#11

Post by AntennaGuy »


turboscrew wrote: Tue Mar 30, 2021 6:13 pm Is this a safe way, or could that break something?
I must be getting old, since my first thought was that it doesn't look safe at all; you could hurt your shoulder or lower back!
* Meade 323 refractor on a manual equatorial mount.
* Celestron C6 SCT on a Twilight 1 Alt-Az mount
Prof. Barnhardt to Klaatu in The Day the Earth Stood Still: "There are several thousand questions I'd like to ask you.”
User avatar
Michael131313 Mexico
Orion Spur Ambassador
Articles: 0
Offline
Posts: 966
Joined: Sun May 12, 2019 5:39 pm
4
Location: San Jose del Valle , Nayarit, Mexico
Status:
Offline

Re: Is this safe way to carry a mount?

#12

Post by Michael131313 »


I am old and worry that I might hurt myself moving my little Twilight 1 around. I don't know how you guys can do it. 🙃
ES AR 102 102mm, f/6.5, ES 254mm f/5 DOB, Obie 10x50, GSO SV 30mm, ES 68° 20mm, ES 82° 14mm, 11mm, 8.8 mm, 6.8mm, 4.7mm. Twilight 1 mount.
User avatar
Lady Fraktor Slovakia
Co-Administrator
Co-Administrator
Articles: 0
Offline
Posts: 9860
Joined: Mon Apr 29, 2019 9:14 pm
4
Location: Slovakia
Status:
Offline

Re: Is this safe way to carry a mount?

#13

Post by Lady Fraktor »


Ruud wrote: Tue Mar 30, 2021 11:42 pm A friend uses a dolly: https://www.astroshop.eu/instruments/as ... r_1_select

His is DIY. He also had to make shallow ramps for either side of the threshold.
Turboscrew has the same moving issue I have, stairs so a dolly is not that useful. :)
See Far Sticks: Antares Elita 103/1575, AOM FLT 105/1000, Bresser BV 127/1200, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, AXJ, AXD
Az/Alt: AYO Digi II/ Argo Navis, Stellarvue M2C/ Argo Navis
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Takahashi prism, TAL, Vixen flip mirror
Eyepieces: Antares to Zeiss
The only culture I have is from yogurt
My day was going well until... people
Image
User avatar
SkyHiker United States of America
Local Group Ambassador
Articles: 0
Online
Posts: 2293
Joined: Sat May 11, 2019 8:40 pm
4
Location: Santa Barbara, CA
Status:
Online

TSS Awards Badges

TSS Photo of the Day

Re: Is this safe way to carry a mount?

#14

Post by SkyHiker »


I would connect mount an tripod with a strap that goes over your shoulders and carry them both at once. It will be much easier because you will be balanced.
... Henk. :D Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
User avatar
turboscrew
Inter-Galactic Ambassador
Articles: 0
Offline
Posts: 3233
Joined: Sat Jun 20, 2020 9:22 am
3
Location: Nokia, Finland
Status:
Offline

TSS Awards Badges

Re: Is this safe way to carry a mount?

#15

Post by turboscrew »


Bigzmey wrote: Tue Mar 30, 2021 11:09 pm One problem with hard cases that they add extra few kg. This is why for my 9.25" SCT OTA I have decided to go with a sturdy padded bag and not drop it. :lol:
I was thinking about that too - except that I'd have to make the bag myself. A piece of wood in the bottom and some foam on top of it. Nylon strap handles going under the whole bag. The straps are just P.I.T.A. to sew.
Last edited by turboscrew on Wed Mar 31, 2021 3:58 pm, edited 1 time in total.
- Juha

Senior Embedded SW Designer
Telescope: OrionOptics XV12, Mount: CEM120, Tri-pier 360 and alternative dobson mount.
Grab 'n go: Omegon AC 102/660 on AZ-3 mount
Eyepieces: 26 mm Omegon SWAN 70°, 15 mm TV Plössl, 12.5 mm Baader Morpheus, 10 mm TV Delos, 6 mm Baader Classic Ortho, 5 mm TV DeLite, 4 mm and 3 mm TV Radians
Cameras: ZWO ASI 294MM Pro, Omegon veLOX 178C
OAG: TS-Optics TSOAG09, ZWO EFW 7 x 36 mm, ZWO filter sets: LRGB and Ha/OIII/SII
Explore Scientific HR 2" coma corrector, Meade x3 1.25" Barlow, TV PowerMate 4x 2"
Some filters (#80A, ND-96, ND-09, Astronomik UHC)
Laptop: Acer Enduro Urban N3 semi-rugged, Windows 11
LAT 61° 28' 10.9" N, Bortle 5

I don't suffer from insanity. I'm enjoying every minute of it.

Image
User avatar
turboscrew
Inter-Galactic Ambassador
Articles: 0
Offline
Posts: 3233
Joined: Sat Jun 20, 2020 9:22 am
3
Location: Nokia, Finland
Status:
Offline

TSS Awards Badges

Re: Is this safe way to carry a mount?

#16

Post by turboscrew »


It's not so much the weight, but the shape. But yes, the cases tend to add about 10 kg to the load to carry.
- Juha

Senior Embedded SW Designer
Telescope: OrionOptics XV12, Mount: CEM120, Tri-pier 360 and alternative dobson mount.
Grab 'n go: Omegon AC 102/660 on AZ-3 mount
Eyepieces: 26 mm Omegon SWAN 70°, 15 mm TV Plössl, 12.5 mm Baader Morpheus, 10 mm TV Delos, 6 mm Baader Classic Ortho, 5 mm TV DeLite, 4 mm and 3 mm TV Radians
Cameras: ZWO ASI 294MM Pro, Omegon veLOX 178C
OAG: TS-Optics TSOAG09, ZWO EFW 7 x 36 mm, ZWO filter sets: LRGB and Ha/OIII/SII
Explore Scientific HR 2" coma corrector, Meade x3 1.25" Barlow, TV PowerMate 4x 2"
Some filters (#80A, ND-96, ND-09, Astronomik UHC)
Laptop: Acer Enduro Urban N3 semi-rugged, Windows 11
LAT 61° 28' 10.9" N, Bortle 5

I don't suffer from insanity. I'm enjoying every minute of it.

Image
User avatar
Bigzmey United States of America
Moderator
Moderator
Articles: 8
Online
Posts: 7550
Joined: Sat May 11, 2019 7:55 pm
4
Location: San Diego, CA USA
Status:
Online

TSS Awards Badges

Re: Is this safe way to carry a mount?

#17

Post by Bigzmey »


turboscrew wrote: Wed Mar 31, 2021 3:34 pm
Bigzmey wrote: Tue Mar 30, 2021 11:09 pm One problem with hard cases that they add extra few kg. This is why for my 9.25" SCT OTA I have decided to go with a sturdy padded bag and not drop it. :lol:
I was thinking about that too - except that I'd have to make the bag myself. A piece of wood in the bottom and some foam on top of it. Nylon strap handles going under the whole bag. The straps are just P.I.T.A. to sew.
This should work nicely. To reduce the weight and provide extra cushion you can use the office/workshop black foam tiles instead of wood. Just cut to desired size.

Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.

Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2382, Comets: 34, Asteroids: 255
User avatar
turboscrew
Inter-Galactic Ambassador
Articles: 0
Offline
Posts: 3233
Joined: Sat Jun 20, 2020 9:22 am
3
Location: Nokia, Finland
Status:
Offline

TSS Awards Badges

Re: Is this safe way to carry a mount?

#18

Post by turboscrew »


Bigzmey wrote: Wed Mar 31, 2021 4:24 pm
turboscrew wrote: Wed Mar 31, 2021 3:34 pm
Bigzmey wrote: Tue Mar 30, 2021 11:09 pm One problem with hard cases that they add extra few kg. This is why for my 9.25" SCT OTA I have decided to go with a sturdy padded bag and not drop it. :lol:
I was thinking about that too - except that I'd have to make the bag myself. A piece of wood in the bottom and some foam on top of it. Nylon strap handles going under the whole bag. The straps are just P.I.T.A. to sew.
This should work nicely. To reduce the weight and provide extra cushion you can use the office/workshop black foam tiles instead of wood. Just cut to desired size.

Is there supposed to be an attachment or link?
I wonder if the tiles can keep the bottom flat under 27 kg?

A 40 cm piece of 1x6 wood with some foam on top of it should keep the bottom flat and spread the pressure.
Some foam could be glued on the sides too.
- Juha

Senior Embedded SW Designer
Telescope: OrionOptics XV12, Mount: CEM120, Tri-pier 360 and alternative dobson mount.
Grab 'n go: Omegon AC 102/660 on AZ-3 mount
Eyepieces: 26 mm Omegon SWAN 70°, 15 mm TV Plössl, 12.5 mm Baader Morpheus, 10 mm TV Delos, 6 mm Baader Classic Ortho, 5 mm TV DeLite, 4 mm and 3 mm TV Radians
Cameras: ZWO ASI 294MM Pro, Omegon veLOX 178C
OAG: TS-Optics TSOAG09, ZWO EFW 7 x 36 mm, ZWO filter sets: LRGB and Ha/OIII/SII
Explore Scientific HR 2" coma corrector, Meade x3 1.25" Barlow, TV PowerMate 4x 2"
Some filters (#80A, ND-96, ND-09, Astronomik UHC)
Laptop: Acer Enduro Urban N3 semi-rugged, Windows 11
LAT 61° 28' 10.9" N, Bortle 5

I don't suffer from insanity. I'm enjoying every minute of it.

Image
User avatar
Bigzmey United States of America
Moderator
Moderator
Articles: 8
Online
Posts: 7550
Joined: Sat May 11, 2019 7:55 pm
4
Location: San Diego, CA USA
Status:
Online

TSS Awards Badges

Re: Is this safe way to carry a mount?

#19

Post by Bigzmey »


I can see and click on the link. Let's try this one

https://www.walmart.com/ip/Everyday-Ess ... /336366651

If you stack 2-3 at the bottom it will be flat enough, but wood/foam combo should work well to.
Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.

Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2382, Comets: 34, Asteroids: 255
User avatar
Lady Fraktor Slovakia
Co-Administrator
Co-Administrator
Articles: 0
Offline
Posts: 9860
Joined: Mon Apr 29, 2019 9:14 pm
4
Location: Slovakia
Status:
Offline

Re: Is this safe way to carry a mount?

#20

Post by Lady Fraktor »


With the mount weighing 27kg I cannot see foam panels working to carry it around with.
A strong plastic storage container filled with the foam panels would work.
See Far Sticks: Antares Elita 103/1575, AOM FLT 105/1000, Bresser BV 127/1200, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, AXJ, AXD
Az/Alt: AYO Digi II/ Argo Navis, Stellarvue M2C/ Argo Navis
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Takahashi prism, TAL, Vixen flip mirror
Eyepieces: Antares to Zeiss
The only culture I have is from yogurt
My day was going well until... people
Image
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

Return to “Beginners forum”