Mirror Temperature Monitor
- Piet Le Roux
- Jupiter Ambassador
- Articles: 0
- Posts: 284
- Joined: Mon May 13, 2019 6:33 pm
- 4
- Location: Bloemfontein, South Africa
- Status:
Offline
-
TSS Photo of the Day
Mirror Temperature Monitor
"Seeing" conditions has a huge effect on how well your reflector telescope preforms, Much of the "atmospheric seeing" problem, however, arises surprisingly close to the telescope, the 'boundary layer' of warm air directly in front of the primary mirror is the chief culprit. Having a 15" Dobsonian with a lovely 2" thick mirror does have its downside because it is not easy to get to the ambient air temperature. Gary Seronik in his "Beat the Heat: Conquering Newtonian Reflector Thermals — Part 2" article :
https://garyseronik.com/beat-the-heat-c ... ls-part-2/
supply some nice graphs to show the difference in cooling a 1" and 2" mirror. A handy tool to monitor this process is a duel temperature monitor, these are sold in automotive accessory stores to monitor the inside and outside temperature of your vehicle. It has a "inside" and "outside" temperature display : the "outside" is measured by a remote sensor, I removed the remote sensor from its plastic housing and covered it in thermal conducting grease, the type used to mount computer CPU's. I mounted the sensor on the top side of my mirror, near its surface, with double sided tape, placing a piece of aluminium baking foil on top of the double sided tape to thermally isolate it better. According to Gary the mirror has to be within 5½°F (3°C) of the ambient air temperature to overcome thermal problems. The photo shows the bottom of my Obsession's mirror and fan housing with the monitor above that.
https://garyseronik.com/beat-the-heat-c ... ls-part-2/
supply some nice graphs to show the difference in cooling a 1" and 2" mirror. A handy tool to monitor this process is a duel temperature monitor, these are sold in automotive accessory stores to monitor the inside and outside temperature of your vehicle. It has a "inside" and "outside" temperature display : the "outside" is measured by a remote sensor, I removed the remote sensor from its plastic housing and covered it in thermal conducting grease, the type used to mount computer CPU's. I mounted the sensor on the top side of my mirror, near its surface, with double sided tape, placing a piece of aluminium baking foil on top of the double sided tape to thermally isolate it better. According to Gary the mirror has to be within 5½°F (3°C) of the ambient air temperature to overcome thermal problems. The photo shows the bottom of my Obsession's mirror and fan housing with the monitor above that.
Main Equipment : Tele Vue 27mm Panoptic, 7&13mm Nagler, Big Barlow : 8" Meade LX90ACF with Meade 2.0" Enhanced Diagonal : Camera Fuji XT100
- Piet Le Roux
- Jupiter Ambassador
- Articles: 0
- Posts: 284
- Joined: Mon May 13, 2019 6:33 pm
- 4
- Location: Bloemfontein, South Africa
- Status:
Offline
-
TSS Photo of the Day
Re: Mirror Temperature Monitor
Just to clarify the sensor placement.....
Main Equipment : Tele Vue 27mm Panoptic, 7&13mm Nagler, Big Barlow : 8" Meade LX90ACF with Meade 2.0" Enhanced Diagonal : Camera Fuji XT100
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute