It's been a while since I've posted, been busy these last few months while I've been waiting for my scope to to arrive that ordered back in February. Everything is here except for the telescope itself. I got the guide equipment camera last week along with other electronics so U figured I would set everything up on the PC that will be running the imaging session. After several hours of trial and error I got everyti8ng actually talking to
I'm using a mini PC for remote control with my laptop. Currently connected over ethernet but will go Wi Fi in the field. I run Stellarium and nothing seems to happen. I hook up monitor and login locally and Stellarium is there and works fine. I went back to remote desktop and still nothing. I opened
Started this thread in the hopes that someone else had come across this problem and knows the answer so I don't have to fight with it. And if not, I will eventually figure out what is causing the problem and post it here.
Configuration,
mini PC, Intel HD Graphics, Driver version 20.19.15.4624, dated 3/8/2017, Windows 10 Pro Ver 2004
https://www.amazon.com/Fanless-Desktop- ... 07CNBVN3L/
Troubleshooting,
Changed color depth from 32 to 16 in RDP, no fix. Turned off bit map cache in RDP, no fix. Next step, locate latest drivers for video, will let y'all know. Hopefully in the mean time some will let me know!