Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
Hi, decided to put my FSQ106 back on the mount and try it out with SGPro. Took a little while to get things setup but managed a nice little run on M13. RGB only and 7x 180sec for each filter. Flats and darks applied but not temp matched darks, so there are a lot of hot pixels. Processed in Pixinsight.
I'm no AP expert by any means, but I really like that! Nicely done Paul!
All the best,
Mark
"The Hankmeister" Celestron 8SE, orange tube Vixen made C80, CG4, AZ-EQ5 and SolarQuest mounts.
Too much Towa glass/mirrors.
Solar:
H/A - PST stage 2 mod with a Baader 90mm ERF on a Celestron XLT 102 (thanks Mike!)
Ca-K - W/O 61mm, Antares 1.6 barlow, Baader 3.8 OD and Ca-K filters with a ZWO ASI174mm.
W/L - C80-HD with Baader 5.0 & 3.8 Solar film, Solar Continuum 7.5nm and UV/IR filters with a Canon EOS 550D. Member of the RASC