I finally had time to play with my new 294mm-pro. I couldn't get SGpro to platesolve with it yet, and wasted a lot of time trying to, then gave up, and just let it go to the area, and then Sharpcap Pro took over from there.
So this is the first light with the new cam. I was unsure of the settings, so decided to use my refractor since I knew what the 1600 settings and time should be. And just chose 40 seconds for
But I did manage to capture enough to make an image:
------------
I had 75 lum 20 sec(I needed much more lum to make it look right, so I left the LUM out of this image)
Red 32x 40 sec
Green 35 x 40 sec
Blue 35 x 40 sec
75 Darks/75Flats
-----------
So I tried 23 minutes per channel with a total of 70 minutes. I couldn't get anymore because of the
The ADU ranged about 2500-3500 which I know is high but don't know this camera well yet. Now if only I could get SGpro to work with it. My version of it is a year old so I don't know if it was confused with Binning and such. But Sharpcap updated its firmware for it I heard. This was at 2x2 Binned at
4.63um
I processed this with
Stellarvue SVX 80T-R
ZWO 294mm-Pro
CEM70 mount
Orion ST with ZWO 290mm for guiding
Thanks for Looking
Larger image on my site here: https://astronebula.com/m100-with-widefield/