Tube interior blackening and baffling

Discuss your refractor type scopes here.
User avatar
John Baars Netherlands
Co-Administrator
Co-Administrator
Articles: 5
Offline
Posts: 2724
Joined: Sat May 11, 2019 9:00 am
4
Location: Schiedam, Netherlands
Status:
Offline

TSS Awards Badges

TSS Photo of the Day

Re: Tube interior blackening and baffling

#41

Post by John Baars »


Lady Fraktor wrote: Sun Sep 29, 2019 4:47 pm(...)The other is how the tube interior is currently a bright surrounding.
Is this from the eyepiece-side? ( I suspect three spacers at the other end)
Never mind, my old Master would give you an "A".

It would be an interesting experiment to baffle the dew shield too.

Not very long ago an opticien wanted to show me some children's fingerprints on the corrector of the 14 inch Meade of the observatory. He pointed it out with a rather bright light. Meanwhile someone was observing through it; he didn't notice it. I didn't believe that and wanted to see it myself. I could not. The light was effectively put on hold by the inside baffle. He told me the wisdom "As long as the incident light doesn't reach the eyepiece, not much harm can be done."

I am not sure if baffling the dewshield will have noticeable effect.
Refractors in frequency of use : *SW Evostar 120ED F/7.5 (all round ), * Vixen 102ED F/9 (vintage), both on Vixen GPDX.
GrabnGo on Alt/AZ : *SW Startravel 102 F/5 refractor( widefield, Sun, push-to), *OMC140 Maksutov F/14.3 ( planets).
Most used Eyepieces: *Panoptic 24, *Morpheus 14, *Leica ASPH zoom, *Zeiss barlow, *Pentax XO5.
Commonly used bino's : *Jena 10X50 , * Canon 10X30 IS, *Swarovski Habicht 7X42, * Celestron 15X70, *Kasai 2.3X40
Rijswijk Public Observatory: * Astro-Physics Starfire 130 f/8, * 6 inch Newton, * C9.25, * Meade 14 inch LX600 ACF, *Lunt.
Amateur astronomer since 1970.
User avatar
notFritzArgelander
In Memory
In Memory
Articles: 0
Offline
Posts: 14925
Joined: Fri May 10, 2019 4:13 pm
4
Location: Idaho US
Status:
Offline

TSS Awards Badges

Re: Tube interior blackening and baffling

#42

Post by notFritzArgelander »


I think that whether dew shield baffling provides a benefit or not depends on the immediate environment. I noticed at my previous dark rural site that my SV ED80A started showing intermittent reflected light from the dew shield when a neighbor installed an intermittent security light. Since the light was well outside the TFOV some additional treatment of the dew shield is called for in an urban / suburban environment.
Scopes: Refs: Orion ST80, SV 80EDA f7, TS 102ED f11 Newts: AWB 130mm, f5, Z12 f5; Cats: VMC110L, Intes MK66,VMC200L f9.75 EPs: KK Fujiyama Orthoscopics, 2x Vixen NPLs (40-6mm) and BCOs, Baader Mark IV zooms, TV Panoptics, Delos, Plossl 32-8mm. Mixed brand Masuyama/Astroplans Binoculars: Nikon Aculon 10x50, Celestron 15x70, Baader Maxbright. Mounts: Star Seeker IV, Vixen Porta II, Celestron CG5
User avatar
Lady Fraktor Slovakia
Co-Administrator
Co-Administrator
Articles: 0
Offline
Posts: 9863
Joined: Mon Apr 29, 2019 9:14 pm
4
Location: Slovakia
Status:
Offline

Re: Tube interior blackening and baffling

#43

Post by Lady Fraktor »


John: The image is through the focuser facing into a brightly lit room, and thank you for your comments :)
I removed the factory baffles and made five new ones. The shadow of the forward baffle falls on the face of the following baffle.

nFA: The 150mm gets used most times in a suburban environment so stray light can be an issue at times.
See Far Sticks: Antares Elita 103/1575, AOM FLT 105/1000, Bresser BV 127/1200, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, AXJ, AXD
Az/Alt: AYO Digi II/ Argo Navis, Stellarvue M2C/ Argo Navis
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Takahashi prism, TAL, Vixen flip mirror
Eyepieces: Antares to Zeiss
The only culture I have is from yogurt
My day was going well until... people
Image
User avatar
notFritzArgelander
In Memory
In Memory
Articles: 0
Offline
Posts: 14925
Joined: Fri May 10, 2019 4:13 pm
4
Location: Idaho US
Status:
Offline

TSS Awards Badges

Re: Tube interior blackening and baffling

#44

Post by notFritzArgelander »


Lady Fraktor wrote: Mon Sep 30, 2019 5:38 am nFA: The 150mm gets used most times in a suburban environment so stray light can be an issue at times.
I suspected as much. I may have to do something similar with my SV. I have a 24 hour porch light illuminating my southern sky exposure. :(
Scopes: Refs: Orion ST80, SV 80EDA f7, TS 102ED f11 Newts: AWB 130mm, f5, Z12 f5; Cats: VMC110L, Intes MK66,VMC200L f9.75 EPs: KK Fujiyama Orthoscopics, 2x Vixen NPLs (40-6mm) and BCOs, Baader Mark IV zooms, TV Panoptics, Delos, Plossl 32-8mm. Mixed brand Masuyama/Astroplans Binoculars: Nikon Aculon 10x50, Celestron 15x70, Baader Maxbright. Mounts: Star Seeker IV, Vixen Porta II, Celestron CG5
User avatar
John Baars Netherlands
Co-Administrator
Co-Administrator
Articles: 5
Offline
Posts: 2724
Joined: Sat May 11, 2019 9:00 am
4
Location: Schiedam, Netherlands
Status:
Offline

TSS Awards Badges

TSS Photo of the Day

Re: Tube interior blackening and baffling

#45

Post by John Baars »


It is a quite similar situation in my backyard.
In the past I made a very long dewshield (no baffles) for my 60/900 refractor. More than 36 cm long. It worked up to a certain level.I just made a simple drawing of it. It seems to me that a combination of a long long shield AND baffles works best.
Refractors in frequency of use : *SW Evostar 120ED F/7.5 (all round ), * Vixen 102ED F/9 (vintage), both on Vixen GPDX.
GrabnGo on Alt/AZ : *SW Startravel 102 F/5 refractor( widefield, Sun, push-to), *OMC140 Maksutov F/14.3 ( planets).
Most used Eyepieces: *Panoptic 24, *Morpheus 14, *Leica ASPH zoom, *Zeiss barlow, *Pentax XO5.
Commonly used bino's : *Jena 10X50 , * Canon 10X30 IS, *Swarovski Habicht 7X42, * Celestron 15X70, *Kasai 2.3X40
Rijswijk Public Observatory: * Astro-Physics Starfire 130 f/8, * 6 inch Newton, * C9.25, * Meade 14 inch LX600 ACF, *Lunt.
Amateur astronomer since 1970.
User avatar
Lady Fraktor Slovakia
Co-Administrator
Co-Administrator
Articles: 0
Offline
Posts: 9863
Joined: Mon Apr 29, 2019 9:14 pm
4
Location: Slovakia
Status:
Offline

Re: Tube interior blackening and baffling

#46

Post by Lady Fraktor »


The current dewshield is 2.5x the aperture (380mm) but I believe I have enough material to make one at 3x (450mm)
See Far Sticks: Antares Elita 103/1575, AOM FLT 105/1000, Bresser BV 127/1200, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, AXJ, AXD
Az/Alt: AYO Digi II/ Argo Navis, Stellarvue M2C/ Argo Navis
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Takahashi prism, TAL, Vixen flip mirror
Eyepieces: Antares to Zeiss
The only culture I have is from yogurt
My day was going well until... people
Image
User avatar
Lady Fraktor Slovakia
Co-Administrator
Co-Administrator
Articles: 0
Offline
Posts: 9863
Joined: Mon Apr 29, 2019 9:14 pm
4
Location: Slovakia
Status:
Offline

Re: Tube interior blackening and baffling

#47

Post by Lady Fraktor »


notFritzArgelander wrote: Mon Sep 30, 2019 5:51 am
Lady Fraktor wrote: Mon Sep 30, 2019 5:38 am nFA: The 150mm gets used most times in a suburban environment so stray light can be an issue at times.
I suspected as much. I may have to do something similar with my SV. I have a 24 hour porch light illuminating my southern sky exposure. :(
The person on one side has a large shed in the garden which has a automatic security light installed on it. It is randomly set off by cats or other animals.
See Far Sticks: Antares Elita 103/1575, AOM FLT 105/1000, Bresser BV 127/1200, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, AXJ, AXD
Az/Alt: AYO Digi II/ Argo Navis, Stellarvue M2C/ Argo Navis
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Takahashi prism, TAL, Vixen flip mirror
Eyepieces: Antares to Zeiss
The only culture I have is from yogurt
My day was going well until... people
Image
User avatar
notFritzArgelander
In Memory
In Memory
Articles: 0
Offline
Posts: 14925
Joined: Fri May 10, 2019 4:13 pm
4
Location: Idaho US
Status:
Offline

TSS Awards Badges

Re: Tube interior blackening and baffling

#48

Post by notFritzArgelander »


Lady Fraktor wrote: Mon Sep 30, 2019 4:20 pm
notFritzArgelander wrote: Mon Sep 30, 2019 5:51 am
Lady Fraktor wrote: Mon Sep 30, 2019 5:38 am nFA: The 150mm gets used most times in a suburban environment so stray light can be an issue at times.
I suspected as much. I may have to do something similar with my SV. I have a 24 hour porch light illuminating my southern sky exposure. :(
The person on one side has a large shed in the garden which has a automatic security light installed on it. It is randomly set off by cats or other animals.
I've tried the polite request route. Utter failure. ;)
Scopes: Refs: Orion ST80, SV 80EDA f7, TS 102ED f11 Newts: AWB 130mm, f5, Z12 f5; Cats: VMC110L, Intes MK66,VMC200L f9.75 EPs: KK Fujiyama Orthoscopics, 2x Vixen NPLs (40-6mm) and BCOs, Baader Mark IV zooms, TV Panoptics, Delos, Plossl 32-8mm. Mixed brand Masuyama/Astroplans Binoculars: Nikon Aculon 10x50, Celestron 15x70, Baader Maxbright. Mounts: Star Seeker IV, Vixen Porta II, Celestron CG5
User avatar
Lady Fraktor Slovakia
Co-Administrator
Co-Administrator
Articles: 0
Offline
Posts: 9863
Joined: Mon Apr 29, 2019 9:14 pm
4
Location: Slovakia
Status:
Offline

Re: Tube interior blackening and baffling

#49

Post by Lady Fraktor »


I have tried also, he moved the lights to pointing at the ground instead of straight out and turned the timer down to five minutes from a half hour.
Small victories I guess. I have offered to buy new lights but so far nothing has changed.
See Far Sticks: Antares Elita 103/1575, AOM FLT 105/1000, Bresser BV 127/1200, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, AXJ, AXD
Az/Alt: AYO Digi II/ Argo Navis, Stellarvue M2C/ Argo Navis
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Takahashi prism, TAL, Vixen flip mirror
Eyepieces: Antares to Zeiss
The only culture I have is from yogurt
My day was going well until... people
Image
User avatar
OzEclipse Australia
Moderator
Moderator
Articles: 2
Online
Posts: 2329
Joined: Sat May 11, 2019 8:11 am
4
Location: Young, NSW, Australia, 34S, 148E
Status:
Online

TSS Awards Badges

TSS Photo of the Day

Re: Tube interior blackening and baffling

#50

Post by OzEclipse »


Hi Gabby,

If you are predominantly trying to exclude one troublesome light source and it is a single light source, have you considered building a one sided extended dewcone? Then the long side shields but there is no other side for the light to bounce off.
one-sided-lenshood.jpg
Another option is a blockout blind at the fence line.

Joe
Image
Amateur astronomer since 1978...................Web site : http://joe-cali.com/
Scopes: ATM 18" Dob, Vixen VC200L, ATM 6"f7, Stellarvue 102ED, Saxon ED80, WO M70 ED, Orion 102 Maksutov, ST80.
Mounts: Takahashi EM-200, iOptron iEQ45, Push dobsonian with Nexus DSC, three homemade EQ's.
Eyepieces: TV Naglers 31, 17, 12, 7; Denkmeier D21 & D14; Pentax XW10, XW5, Unitron 40mm Kellner, Meade Or 25,12
Cameras : Pentax K1, K5, K01, K10D / VIDEO CAMS : TacosBD, Lihmsec.
Cam/guider/controllers: Lacerta MGEN 3, SW Synguider, Simulation Curriculum SkyFi 3+Sky safari
Memberships Astronomical Association of Queensland; RASNZ Occultations Section; Single Exposure Milky Way Facebook Group (Moderator) (12k members)
User avatar
Lady Fraktor Slovakia
Co-Administrator
Co-Administrator
Articles: 0
Offline
Posts: 9863
Joined: Mon Apr 29, 2019 9:14 pm
4
Location: Slovakia
Status:
Offline

Re: Tube interior blackening and baffling

#51

Post by Lady Fraktor »


An interesting idea Joe
See Far Sticks: Antares Elita 103/1575, AOM FLT 105/1000, Bresser BV 127/1200, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, AXJ, AXD
Az/Alt: AYO Digi II/ Argo Navis, Stellarvue M2C/ Argo Navis
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Takahashi prism, TAL, Vixen flip mirror
Eyepieces: Antares to Zeiss
The only culture I have is from yogurt
My day was going well until... people
Image
User avatar
OzEclipse Australia
Moderator
Moderator
Articles: 2
Online
Posts: 2329
Joined: Sat May 11, 2019 8:11 am
4
Location: Young, NSW, Australia, 34S, 148E
Status:
Online

TSS Awards Badges

TSS Photo of the Day

Re: Tube interior blackening and baffling

#52

Post by OzEclipse »


Gabby

You can try one made out of some thin black card & an elastic band to test it out before investing time into a metal build.

Joe
Image
Amateur astronomer since 1978...................Web site : http://joe-cali.com/
Scopes: ATM 18" Dob, Vixen VC200L, ATM 6"f7, Stellarvue 102ED, Saxon ED80, WO M70 ED, Orion 102 Maksutov, ST80.
Mounts: Takahashi EM-200, iOptron iEQ45, Push dobsonian with Nexus DSC, three homemade EQ's.
Eyepieces: TV Naglers 31, 17, 12, 7; Denkmeier D21 & D14; Pentax XW10, XW5, Unitron 40mm Kellner, Meade Or 25,12
Cameras : Pentax K1, K5, K01, K10D / VIDEO CAMS : TacosBD, Lihmsec.
Cam/guider/controllers: Lacerta MGEN 3, SW Synguider, Simulation Curriculum SkyFi 3+Sky safari
Memberships Astronomical Association of Queensland; RASNZ Occultations Section; Single Exposure Milky Way Facebook Group (Moderator) (12k members)
User avatar
Apollo69s Sweden
Earth Ambassador
Articles: 0
Offline
Posts: 39
Joined: Sat Oct 19, 2019 12:57 am
4
Location: Sweden
Status:
Offline

Re: Tube interior blackening and baffling

#53

Post by Apollo69s »


Ive go 2 big in my Bresser approxomaly 1/3 into the scope its sticking about 1 cm from the tube wall into the scope ,and the 2nd is in the 2nd off 1/3 lenght off the scope its sticking about 4 cm into the scope..its just around 1 mm thick ---and a little rim 3 mm height its 10 cm into the scope .counting from the big lens side..3,0 mm thick metal body on this scope---,,,and ita also a structured metal handle,,and rings----its realy nice to handle--no wimpy things here--
EQ-6--- :pray: ---EXOS-2---- :pray: Bresser Messier AR-152/1200--- :pray: ---
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

Return to “Refractor type Telescopes”