DIY Anti-vibration pads?
- pakarinen
- Inter-Galactic Ambassador
- Articles: 0
- Posts: 4032
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
DIY Anti-vibration pads?
Not sure if my deck is showing more signs of aging, if the ground has different water content these days, or if I'm just becoming more aware, but I've started to notice vibrations while observing at higher powers. It's particularly noticeable if I tap my foot for example.
I'm loathe to spend $80 or whatever on commercial anti-vibe pads, so I'm wondering if anybody has made their own.
Thanks!
I'm loathe to spend $80 or whatever on commercial anti-vibe pads, so I'm wondering if anybody has made their own.
Thanks!
=============================================================================
I drink tea, I read books, I look at stars when I'm not cursing clouds. It's what I do.
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
I drink tea, I read books, I look at stars when I'm not cursing clouds. It's what I do.
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- UlteriorModem
- Local Group Ambassador
- Articles: 0
- Posts: 2112
- Joined: Sat May 11, 2019 1:32 am
- 4
- Location: Florida
- Status:
Offline
-
TSS Photo of the Day
Re: DIY Anti-vibration pads?
How about a set for 12 bucks?
Tom
Current Equipment:
Mount: Celestron CGX-L
Scope: 130mm f7 APO
Cam: ASI071mc-pro
Current Equipment:
Mount: Celestron CGX-L
Scope: 130mm f7 APO
Cam: ASI071mc-pro
- pakarinen
- Inter-Galactic Ambassador
- Articles: 0
- Posts: 4032
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: DIY Anti-vibration pads?
Even better - Amazon can do the work!
=============================================================================
I drink tea, I read books, I look at stars when I'm not cursing clouds. It's what I do.
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
I drink tea, I read books, I look at stars when I'm not cursing clouds. It's what I do.
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- Bigzmey
- Moderator
- Articles: 8
- Posts: 7666
- Joined: Sat May 11, 2019 7:55 pm
- 4
- Location: San Diego, CA USA
- Status:
Offline
-
TSS Awards Badges
Re: DIY Anti-vibration pads?
Interesting. How they compare to the typical astro pads?
BTW. These for $24 are identical to more expensive Orion etc. re-brands. I wish they were pink like in the pic, but the set I got from them was with red inserts. Still works.
Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
- UlteriorModem
- Local Group Ambassador
- Articles: 0
- Posts: 2112
- Joined: Sat May 11, 2019 1:32 am
- 4
- Location: Florida
- Status:
Offline
-
TSS Photo of the Day
Re: DIY Anti-vibration pads?
No idea how they compare. I don't use them
Tom
Current Equipment:
Mount: Celestron CGX-L
Scope: 130mm f7 APO
Cam: ASI071mc-pro
Current Equipment:
Mount: Celestron CGX-L
Scope: 130mm f7 APO
Cam: ASI071mc-pro
- fatboy1271
- Pluto Ambassador
- Articles: 0
- Posts: 407
- Joined: Wed Jun 12, 2019 3:34 pm
- 4
- Location: SoCal
- Status:
Offline
Re: DIY Anti-vibration pads?
Haha, UM! I was just wondering if I should replace my Celestron pads with those. Mine are getting pretty worn. Maybe for $12 what's to lose?
OTAs: Explore Scientific ED80 Essential Edition / The Little Guy (Celestron 90SLT)
Mount: Celestron Advanced VX
Gear: Canon 70D / Hutech LPS-D1-48 / ES 2" Field Flattener / QHY PoleMaster / Celestron GPS / ZWO ASI120MC / Orion 50mm Guide Scope / ZWO EAF
Software: CPWI / PHD2 / N.I.N.A / Stellarium/StellariumScope/Remote Control / PI / RegiStax 6 / AutoStakkert!2 / PIPP | Retired? BackyardEOS Premium
EPs: Stock Celestron 9mm and 24mm / Celestron Omni 32mm (I love this one!) / Celestron X-Cel LX 3x Barlow (I think 2X would have been smarter...)
Support Staff (Loved Ones!): CeCe, Ro, and Geno
Let's Go Pens!!!
Mount: Celestron Advanced VX
Gear: Canon 70D / Hutech LPS-D1-48 / ES 2" Field Flattener / QHY PoleMaster / Celestron GPS / ZWO ASI120MC / Orion 50mm Guide Scope / ZWO EAF
Software: CPWI / PHD2 / N.I.N.A / Stellarium/StellariumScope/Remote Control / PI / RegiStax 6 / AutoStakkert!2 / PIPP | Retired? BackyardEOS Premium
EPs: Stock Celestron 9mm and 24mm / Celestron Omni 32mm (I love this one!) / Celestron X-Cel LX 3x Barlow (I think 2X would have been smarter...)
Support Staff (Loved Ones!): CeCe, Ro, and Geno
Let's Go Pens!!!
- fatboy1271
- Pluto Ambassador
- Articles: 0
- Posts: 407
- Joined: Wed Jun 12, 2019 3:34 pm
- 4
- Location: SoCal
- Status:
Offline
Re: DIY Anti-vibration pads?
Nice find! One reviewer said his dad has the Celestron set and he can't find a difference, other than color.
OTAs: Explore Scientific ED80 Essential Edition / The Little Guy (Celestron 90SLT)
Mount: Celestron Advanced VX
Gear: Canon 70D / Hutech LPS-D1-48 / ES 2" Field Flattener / QHY PoleMaster / Celestron GPS / ZWO ASI120MC / Orion 50mm Guide Scope / ZWO EAF
Software: CPWI / PHD2 / N.I.N.A / Stellarium/StellariumScope/Remote Control / PI / RegiStax 6 / AutoStakkert!2 / PIPP | Retired? BackyardEOS Premium
EPs: Stock Celestron 9mm and 24mm / Celestron Omni 32mm (I love this one!) / Celestron X-Cel LX 3x Barlow (I think 2X would have been smarter...)
Support Staff (Loved Ones!): CeCe, Ro, and Geno
Let's Go Pens!!!
Mount: Celestron Advanced VX
Gear: Canon 70D / Hutech LPS-D1-48 / ES 2" Field Flattener / QHY PoleMaster / Celestron GPS / ZWO ASI120MC / Orion 50mm Guide Scope / ZWO EAF
Software: CPWI / PHD2 / N.I.N.A / Stellarium/StellariumScope/Remote Control / PI / RegiStax 6 / AutoStakkert!2 / PIPP | Retired? BackyardEOS Premium
EPs: Stock Celestron 9mm and 24mm / Celestron Omni 32mm (I love this one!) / Celestron X-Cel LX 3x Barlow (I think 2X would have been smarter...)
Support Staff (Loved Ones!): CeCe, Ro, and Geno
Let's Go Pens!!!
- UlteriorModem
- Local Group Ambassador
- Articles: 0
- Posts: 2112
- Joined: Sat May 11, 2019 1:32 am
- 4
- Location: Florida
- Status:
Offline
-
TSS Photo of the Day
Re: DIY Anti-vibration pads?
I had some of the expensive ones at one time. The weight of the CGX-L and scope, plus the fact I leave it set up 24-7 365, all the gel squished out of them
Tom
Current Equipment:
Mount: Celestron CGX-L
Scope: 130mm f7 APO
Cam: ASI071mc-pro
Current Equipment:
Mount: Celestron CGX-L
Scope: 130mm f7 APO
Cam: ASI071mc-pro
- Chich
- Pluto Ambassador
- Articles: 0
- Posts: 492
- Joined: Fri Jul 05, 2019 6:40 am
- 4
- Location: Vancouver Island, BC
- Status:
Offline
-
TSS Awards Badges
Re: DIY Anti-vibration pads?
You could try making them out of used plastic food containers filled with silicone sealant.
https://astromart.com/reviews-and-artic ... ation-pads
https://astromart.com/reviews-and-artic ... ation-pads
Keep calm and set SCE To AUX
Wildland fire: a strong tradition since 440,000,000 BCE
NEW for 345,000,000 BCE - Crown fires!
- pakarinen
- Inter-Galactic Ambassador
- Articles: 0
- Posts: 4032
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: DIY Anti-vibration pads?
Chich wrote: ↑Thu Oct 03, 2019 1:06 am You could try making them out of used plastic food containers filled with silicone sealant.
https://astromart.com/reviews-and-artic ... ation-pads
Actually, the bathtub *is* due for a recaulking and I have a balance left on a HoPo gift card.
=============================================================================
I drink tea, I read books, I look at stars when I'm not cursing clouds. It's what I do.
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
I drink tea, I read books, I look at stars when I'm not cursing clouds. It's what I do.
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- Intrepid
- Earth Ambassador
- Articles: 0
- Posts: 8
- Joined: Fri Jun 14, 2019 2:33 pm
- 4
- Location: Peterborough, ON, Canada
- Status:
Offline
Re: DIY Anti-vibration pads?
3 Hockey pucks are often used for this purpose. They seem to work quite well.
Intrepid,
Telescopes/Mounts: Meade LX-90 GPS 203mm,f/ 10 SCT ; Williams Zenithstar II ED 80mm, f/ 6.8; Celestron Cometron 114mm, f/ 4.0 Newtonian; Ioptron Cube Pro.
Diagonals: 1.25 & 2.0" Dielectric. Barlows: 1.25 & 2.0" ED. Focal reducer: Antaresf/ 6.3 & Meade F/ 3.3. Off axis guider: Orion Deluxe. Elec. Focuser: JMI NGF-S
Eps: Meade 4000 set + 25mm, Lanthanum 5.2 & 12.5mm,ES 4.7mm, 6.7mm 82° & 16mm 68˚, Antares 9.7 & 25mm W70, Zhumell 2.0" 30mm 68°.
Other: Sony α6000, Nikon 8800; MeadeEq . Wedge, Filters: 80mm Solar, OIII, Hα, HLPR, LRGB & X Polarizing, Kson Wheel; Dew Heaters + 4ch kOaks Controller: Rigel QF.
All above purchased second hand 2012-2019.
Also: Canon SX40IS 35x Optical zoom; Kepcor 7x50 & Celestron 15x70 Binos; Meade 12mm Illum. AstrometricEp .; Kendricks Dew Shield (SCT ); Mallincam μS+50mm f/ 1.4 lens, BCO 10mm Ep ..
Intrepid,
Telescopes/Mounts: Meade LX-90 GPS 203mm,
Diagonals: 1.25 & 2.0" Dielectric. Barlows: 1.25 & 2.0" ED. Focal reducer: Antares
Eps: Meade 4000 set + 25mm, Lanthanum 5.2 & 12.5mm,
Other: Sony α6000, Nikon 8800; Meade
All above purchased second hand 2012-2019.
Also: Canon SX40IS 35x Optical zoom; Kepcor 7x50 & Celestron 15x70 Binos; Meade 12mm Illum. Astrometric
- OzEclipse
- Moderator
- Articles: 2
- Posts: 2389
- Joined: Sat May 11, 2019 8:11 am
- 4
- Location: Young, NSW, Australia, 34S, 148E
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: DIY Anti-vibration pads?
pakarinen wrote: ↑Wed Oct 02, 2019 2:07 pm Not sure if my deck is showing more signs of aging, if the ground has different water content these days, or if I'm just becoming more aware, but I've started to notice vibrations while observing at higher powers. It's particularly noticeable if I tap my foot for example.
I'm loathe to spend $80 or whatever on commercial anti-vibe pads, so I'm wondering if anybody has made their own.
Thanks!
Do you mean tap your feet something like this??
Must be hard to observe while doing tap??
A friend of mine replaced a pier mounted 16" newt and now has a C14 on a field tripod sitting on the concrete floor of his observatory.
He glued two of these -
https://www.bunnings.com.au/whites-50-x ... k_p3961977
to one of these-
https://www.bunnings.com.au/macsim-50-x ... r_p1101092
Drilled a bit of a depression in the top pad to make a locating hollow for the feet and he says it works fine.
Joe
Amateur astronomer since 1978...................Web site : http://joe-cali.com/
Scopes: ATM 18" Dob, Vixen VC200L, ATM 6"f7, Stellarvue 102ED, Saxon ED80, WO M70 ED, Orion 102 Maksutov, ST80.
Mounts: Takahashi EM-200, iOptron iEQ45, Push dobsonian with Nexus DSC, three homemade EQ's.
Eyepieces: TV Naglers 31, 17, 12, 7; Denkmeier D21 & D14; Pentax XW10, XW5, Unitron 40mm Kellner, Meade Or 25,12
Cameras : Pentax K1, K5, K01, K10D / VIDEO CAMS : TacosBD, Lihmsec.
Cam/guider/controllers: Lacerta MGEN 3, SW Synguider, Simulation Curriculum SkyFi 3+Sky safari
Memberships Astronomical Association of Queensland; RASNZ Occultations Section; Single Exposure Milky Way Facebook Group (Moderator) (12k members), The Sky Searchers (moderator)
- pakarinen
- Inter-Galactic Ambassador
- Articles: 0
- Posts: 4032
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: DIY Anti-vibration pads?
My wife and I used to do competitive ballroom dancing - much more like this than Fred and Ginger :
https://www.youtube.com/watch?v=laJYC-fvUBM
Interestingly though Ginger and I share a birthday and my wife and Fred share theirs.
=============================================================================
I drink tea, I read books, I look at stars when I'm not cursing clouds. It's what I do.
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
I drink tea, I read books, I look at stars when I'm not cursing clouds. It's what I do.
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- OzEclipse
- Moderator
- Articles: 2
- Posts: 2389
- Joined: Sat May 11, 2019 8:11 am
- 4
- Location: Young, NSW, Australia, 34S, 148E
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: DIY Anti-vibration pads?
I'm a street latin dancer from way back. Salsa, bachata, merengue!
Though I don't go every week these days, you never really stop being a dancer.
Dancing aside, my friend says that the $4 hardware anti-vibration pads work fine. He lives in Brisbane so I haven't seen them in operation.
I found this picture and excerpt from a piece he wrote in our astronomy club newsletter.
I observe from a quiet rural property on soft earth so I have no need for this type of thing for myself.
cheers
Joe
Though I don't go every week these days, you never really stop being a dancer.
Dancing aside, my friend says that the $4 hardware anti-vibration pads work fine. He lives in Brisbane so I haven't seen them in operation.
I found this picture and excerpt from a piece he wrote in our astronomy club newsletter.
I observe from a quiet rural property on soft earth so I have no need for this type of thing for myself.
cheers
Joe
Amateur astronomer since 1978...................Web site : http://joe-cali.com/
Scopes: ATM 18" Dob, Vixen VC200L, ATM 6"f7, Stellarvue 102ED, Saxon ED80, WO M70 ED, Orion 102 Maksutov, ST80.
Mounts: Takahashi EM-200, iOptron iEQ45, Push dobsonian with Nexus DSC, three homemade EQ's.
Eyepieces: TV Naglers 31, 17, 12, 7; Denkmeier D21 & D14; Pentax XW10, XW5, Unitron 40mm Kellner, Meade Or 25,12
Cameras : Pentax K1, K5, K01, K10D / VIDEO CAMS : TacosBD, Lihmsec.
Cam/guider/controllers: Lacerta MGEN 3, SW Synguider, Simulation Curriculum SkyFi 3+Sky safari
Memberships Astronomical Association of Queensland; RASNZ Occultations Section; Single Exposure Milky Way Facebook Group (Moderator) (12k members), The Sky Searchers (moderator)
- pakarinen
- Inter-Galactic Ambassador
- Articles: 0
- Posts: 4032
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: DIY Anti-vibration pads?
We do a little salsa and bachata now and then at social dances. Good stuff.
=============================================================================
I drink tea, I read books, I look at stars when I'm not cursing clouds. It's what I do.
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
I drink tea, I read books, I look at stars when I'm not cursing clouds. It's what I do.
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
- GCoyote
- Local Group Ambassador
- Articles: 0
- Posts: 2709
- Joined: Mon May 13, 2019 2:53 am
- 4
- Location: Laurel, MD, USA
- Status:
Offline
Re: DIY Anti-vibration pads?
I save the dense grey or black foam that cosmetics and jewelry come packed in. I've been using it to make custom storage for my instruments but I imagine it would work for pads as well.
Any metaphor will tear if stretched over too much reality.
Gary C
Celestron Astro Master 130mm f5 Newtonian GEM
Meade 114-EQ-DH f7.9 Newtonian w/ manual GEM
Bushnell 90mm f13.9 Catadioptric
Gskyer 80mm f5 Alt/Az refractor
Jason 10x50 Binoculars
Celestron 7x50 Binoculars
Svbony 2.1x42 Binoculars
(And a bunch of stuff I'm still trying to fix or find parts for.)
Gary C
Celestron Astro Master 130mm f5 Newtonian GEM
Meade 114-EQ-DH f7.9 Newtonian w/ manual GEM
Bushnell 90mm f13.9 Catadioptric
Gskyer 80mm f5 Alt/Az refractor
Jason 10x50 Binoculars
Celestron 7x50 Binoculars
Svbony 2.1x42 Binoculars
(And a bunch of stuff I'm still trying to fix or find parts for.)
- Steve
- Earth Ambassador
- Articles: 0
- Posts: 18
- Joined: Tue Sep 01, 2020 6:03 pm
- 3
- Location: England
- Status:
Offline
Re: DIY Anti-vibration pads?
I like the idea of moulding your own,very interesting and cheap.It might just work....Steve.
- MistrBadgr
- Orion Spur Ambassador
- Articles: 0
- Posts: 748
- Joined: Sat May 11, 2019 9:27 pm
- 4
- Location: Broken Arrow, Okla, USA
- Status:
Offline
-
TSS Awards Badges
Re: DIY Anti-vibration pads?
I cut up cheap mouse pads in two inch squares. I put a thin bead of silicon window caulk a little inboard of the perimeter and glue a stack together on a roughly three inch square of wood (normally 3/4" plywood). Three layers of pad on each works for small scopes like a yoke mounted 60mm refractor. Four squares works for my Polaris 114, 4.5 inch f/ 8 reflector. I think five pads would work for my 20 pound equatorial scopes, but I have not tried it yet.
The pad material is black, so I have been painting the wood white before the glue job, for visibility in the dark.
The pad material is black, so I have been painting the wood white before the glue job, for visibility in the dark.
Bill Steen
Many small scopes, plus a Lightbridge 12, LX 70-8R,6R,6M
Many eyepieces, just not really expensive ones.
Many small scopes, plus a Lightbridge 12, LX 70-8R,6R,6M
Many eyepieces, just not really expensive ones.
- GCoyote
- Local Group Ambassador
- Articles: 0
- Posts: 2709
- Joined: Mon May 13, 2019 2:53 am
- 4
- Location: Laurel, MD, USA
- Status:
Offline
Re: DIY Anti-vibration pads?
Interesting. Did you put a hole in the plywood to keep the feet from slipping off?
Any metaphor will tear if stretched over too much reality.
Gary C
Celestron Astro Master 130mm f5 Newtonian GEM
Meade 114-EQ-DH f7.9 Newtonian w/ manual GEM
Bushnell 90mm f13.9 Catadioptric
Gskyer 80mm f5 Alt/Az refractor
Jason 10x50 Binoculars
Celestron 7x50 Binoculars
Svbony 2.1x42 Binoculars
(And a bunch of stuff I'm still trying to fix or find parts for.)
Gary C
Celestron Astro Master 130mm f5 Newtonian GEM
Meade 114-EQ-DH f7.9 Newtonian w/ manual GEM
Bushnell 90mm f13.9 Catadioptric
Gskyer 80mm f5 Alt/Az refractor
Jason 10x50 Binoculars
Celestron 7x50 Binoculars
Svbony 2.1x42 Binoculars
(And a bunch of stuff I'm still trying to fix or find parts for.)
- pakarinen
- Inter-Galactic Ambassador
- Articles: 0
- Posts: 4032
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: DIY Anti-vibration pads?
Yeah, the mouse pad idea sounds interesting - I must have a dozen of them lying around the house and office.
=============================================================================
I drink tea, I read books, I look at stars when I'm not cursing clouds. It's what I do.
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
I drink tea, I read books, I look at stars when I'm not cursing clouds. It's what I do.
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute