Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
Come join the friendliest, most engaging and inclusive astronomy forum geared for beginners and advanced telescope users, astrophotography devotees, plus check out our "Astro" goods vendors.
g'day all, sometime ago i got a lathe to do some hobby work during out of order astronomy repairs, finally it's all setup and i have the correct tools!, i've been on some machining forums and learning all kinds of things, isn't too difficult as i have a metal trade background.
The idea is to get a very low profile barlow holder that can be stacked with other 42mm adapters, something much smaller then a typical 50-60mm stock one with the eyepiece holder and screw. this should help getting better f ratio adjustments on a sct
.
I still have to part it in half at the step down and machine the m42 mm 0.75mm male threaded end. i might have room for 2 of these ,might give one away if anyone is interested.
i measured everything myself and just guesstimation on the tolerance, and then just threaded it until it fitted correctly
Attachments
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
done the other end, i learned this trick, add a clearway for the threading tool so you one can screw the adapter all the way against it's mating piece also avoids ramming the lather tool to the back of the stock you're machining .
I was going to part it in half but it was getting a little too late in the afternoon to be making noise,
i'll touch it up next week.maybe machine the threaded end down a bit more for a better hard stop on other items that have a shallow female threading
Attachments
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .