![Very Happy :D](./images/smilies/icon/biggrin.gif)
Today I decided to finally make the modification to my Jason that I’ve been thinking about for a while.
First, I should go back in time a bit, if that’s OK with Einstein. About four years ago now, I answered a local buy and sell ad (Kijiji) for an 80mm
I personally have nothing but good to say about Towa optics, both mirrors and objectives, and with this scope, I have 8 so equipped.
All the re-branded scopes made by Towa have a “circle-T” on the label, as you can see below. The only ones that don’t are the actual Towa scopes; I have one. This 80mm Jason had the circle-T in one of the pics of the label in the advert, so I thought why not? For a buck a millimeter… Plus, where do you find an 80mm these days at
I drove the 10 miles, met the guy, and didn’t even haggle the price. I came home with this:
BTW, the lamp is missing the bulb (where do you find one of them?) and the lampshade is actually porcelain. You can also see it has the .965” diagonal and lens. Holy drinking straw views, Batman…!!!
Since the OD of the drawtube is 1.25”, that was an easy fix:
Of course, with the improvement in views, I found I really wanted a two-speed focuser, Yeah, good luck with that for this. So, back to old-school ideas:
Alrighty. Once that was all done, I did a star test on it. Absolutely perfect. The views of planets, the Moon, and various doubles have been stunning. I use the stock star diagonal that came with my orange-tube Celestron/Vixen C80 and my Fujiyama KK’s.
So it’s been like that for two years. Great views, with one problem: Getting it out the back door.
The mount it came with is rock-solid. A department store scope on an adequate mount; imagine that! I did mount this scope on my CG4, but with the tube coming in at 53” when in focus, and the feet of the CG4 only being 29” apart… I don’t trust that.
The legs on the original mount don’t fold up; the same is true for all these old scopes. We don’t have a garage, so I keep it in the basement or living room, depending on the weather. This is the problem. The feet on it are 34” apart and the back door is just over 31” wide. Not a big problem, just a bit of maneuvering. Still, the basement stairs are about 30” with a corner, so you can hear me bringing it upstairs for sure; not good in the wee hours. Plus I don’t want to fill the mount legs full of nicks and dings.
I need to make the legs able to fold in.
Fast forward to today. I actually slept in; woke up at 10ish. Came downstairs, and saw the
Sarah (my daughter unit) woke up, and we decided to go to A&W for an early lunch. Mum stayed at home as she was watching Space Force. It was supposed to rain today, and as we were at the drive-through, it certainly looked like it:
About ten minutes later, Sarah snapped this as we were driving home,;chowing down on Teen burgers, fries and onion rings. I’m really good at steering with my knee…
![Laughing :lol:](./images/smilies/icon/lol.gif)
We got in, and it drizzled for about twenty minutes. That was it, but the humidity broke and it rapidly cooled off out. I actually did some housework (way to impress the wifey) and watched the launch of Dragon to the
After that I went outside and decided, Nice weather for some welding.
I’ve had this idea in my head for a bit, so here we go. I used some 3/8” round bar and some 3/8 nuts. You can probably see where I’m going with this…:
Ok, so it’s ugly and not perfect. One “leg” is out 1/16 more than the other two, but really… It does line up, and since the other side is what I’ll be seeing, it’s all good. I would’ve rather done this with a TIG welder, but flux-core will suffice
![Very Happy :D](./images/smilies/icon/biggrin.gif)
This took about an hour. Heat induces warpage, and since I was welding thick to thin, it takes a few passes, and you gotta keep the heat to a minimum, ie give it time to cool before another pass.
Once I did that, I made another weld pass on the nuts at the end of the legs. Turned off the welder, wrapped up the whip and ground wire, and went to stand up. Seems my left leg had pins and needles (fallen asleep), so I put my right hand down to brace myself for the push upwards.
Guess what I forgot was still sitting there.
Felt like a cow; from the circle nut ranch…:lol: Funny thing is, it only really hurts for a few seconds, then it’s fine. You play with fire, you might get burned.
After that fun, we had dinner, Sarah went to see a friend she’s been seeing since this started, and I went to try all this. I took off the old .965 eyepiece tray and bolted in my creation. Took a deep breath, lifted the mount a bit by the clamshell, and pulled up on the washer in the center. Wow, it works!
I carried it out the door and took some measurements and pics. I made my whatever you want to call it to make the feet be a little wider apart than what it was as stock. Turns out, the feet are now 40” apart as opposed to 34”. It also feels more solid even than before. It weighs about what my CG4 does (pictured with the Jason mount below), and the counter-weight has to be at the bottom of the rod for the scope to be balanced.
This is a pic of the difference in spacing between the stock part and mine:
I’ve played with it a few times now, and all seems good. I might put some thin black plastic I have between the wood legs and mount, but for tonight it’s fine. As I type this it’s coming up to 10:30PM. Supposed to be really nice out after 11PM, I shall see and hope.
And Sarah decided to come out as I was doing the above and take a pic of moi. Man, a year and change ago I was bald and wearing the same hat. No pics of that, trust me. Now? Geez, I can’t wait to get a haircut!!
![Laughing :lol:](./images/smilies/icon/lol.gif)
So far a good day, all considered. Even the
Have a good night all!!