Telescope Mount Payload Capacity

If we see enough activity with a given brand we will create a new subforum.
Post Reply
User avatar
JayTee
Co-Administrator
Articles: 1
Posts: 3582
Joined: Thu Apr 25, 2019 3:23 am
2
Location: Hayden, ID
Contact:

TSS Awards Badges

TSS Photo of the Day

Telescope Mount Payload Capacity

#1

Post by JayTee »

I found this spreadsheet a while back, can't remember where so I can't cite it, but it is publicly accessible info.

Anyway, here's the spreadsheet. I can't claim it's 100% accurate but it's close because I just spent an hour on it trying to get the info updated and correct.
Mount Payloads.xlsx
(14.63 KiB) Downloaded 198 times
Cheers,
JT
JT
∞ Scopes: Celestron CPC1100 #2 Scope: 8" f/7.5 Dob AP Scopes: TPO 6" f/9 RC, ES 80mm f/6 APO G&G Scopes: Meade 102mm f/7.8, Bresser 102mm f/4.5 Guide Scopes: 70 & 80mm fracs
∞ Mounts: iOptron CEM60, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: Canon T3i (x2), ZWO ASI294MC Pro & 120MC, Orion SSAG
∞ Binos: 10X50,10.5X70,15X70², 25X100
∞ EPs: ES: 21 100°, 30 82° X-Cels: 9, 12, 18, 25 GSO:15,20
Image

I never met a scope I didn't want to keep. "My God, it's full of stars." Searching the skies since 1966!
User avatar
Bigzmey
Inter-Galactic Ambassador
Articles: 6
Posts: 3625
Joined: Sat May 11, 2019 7:55 pm
2
Location: San Diego, CA USA

TSS Awards Badges

Re: Telescope Mount Payload Capacity

#2

Post by Bigzmey »

Handy reference, thanks JT!
Scopes: Stellarvue: SV102 ED F7; Celestron: 9.25" EdgeHD F10, 8" SCT F10, Omni XLT 150R Achro F5, Onyx 80ED F6.3; Meade: 80ST Achro F5.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: Orion: Binoviewers, Little Giant II 15x70, WorldView 10x50, Nikon: Action EX 16x50 & 8x40.
EPs: Pentax: XWs, XL & 2xXFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: 2xSLVs; Baader: 2xBCOs, Aspherics, Mark IV, Meade: Plossls.
Diagonals: Baader: BBHS silver mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: Positive lock prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC, Orion: UltraBlock, SkyGlow.
Observing: DSOs: 2293 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 1817, S110: 77). Doubles: 1452, Comets: 19, Asteroids: 97
mcolbert
Saturn Ambassador
Articles: 0
Posts: 348
Joined: Sat May 25, 2019 6:20 am
2
Location: NSW Rural (Aust)

Re: Telescope Mount Payload Capacity

#3

Post by mcolbert »

another vote of thanks from me as well. The last time I did this it was years ago and so many mounts have come out in the meantime.
Refractor - APQ 130 Reflector - Meade SCT Au coating. Mount - AYOMaster (on order)
Cameras - Blads, D70s, D3300, Lunar and Planetary Cameras (2)
DIY Glass - German military and opthalmic sourced items, AGFA AVIPHOT DIA C
mcolbert
Saturn Ambassador
Articles: 0
Posts: 348
Joined: Sat May 25, 2019 6:20 am
2
Location: NSW Rural (Aust)

Re: Telescope Mount Payload Capacity

#4

Post by mcolbert »

then we have the alt-az mounts, AOSwiss with their AYO mount is one left out.
Refractor - APQ 130 Reflector - Meade SCT Au coating. Mount - AYOMaster (on order)
Cameras - Blads, D70s, D3300, Lunar and Planetary Cameras (2)
DIY Glass - German military and opthalmic sourced items, AGFA AVIPHOT DIA C
User avatar
UlteriorModem
Local Group Ambassador
Articles: 0
Posts: 2014
Joined: Sat May 11, 2019 1:32 am
2
Location: Florida

TSS Photo of the Day

Re: Telescope Mount Payload Capacity

#5

Post by UlteriorModem »

Hrm handy reference but it looks a tad conservative! 37 lbs on a CGX-L ? Heck my OTA alone weighs mort than that!
Tom

Current Equipment:
Mount: Celestron CGX-L
Scope: 8" f3.9 "Astrograph"
Cam: ASI071mc-pro
User avatar
JayTee
Co-Administrator
Articles: 1
Posts: 3582
Joined: Thu Apr 25, 2019 3:23 am
2
Location: Hayden, ID
Contact:

TSS Awards Badges

TSS Photo of the Day

Re: Telescope Mount Payload Capacity

#6

Post by JayTee »

Hi Tom,

That's the 50% payload capacity number, not the max capacity number. Look to the left of that number.

Cheers,
JT
JT
∞ Scopes: Celestron CPC1100 #2 Scope: 8" f/7.5 Dob AP Scopes: TPO 6" f/9 RC, ES 80mm f/6 APO G&G Scopes: Meade 102mm f/7.8, Bresser 102mm f/4.5 Guide Scopes: 70 & 80mm fracs
∞ Mounts: iOptron CEM60, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: Canon T3i (x2), ZWO ASI294MC Pro & 120MC, Orion SSAG
∞ Binos: 10X50,10.5X70,15X70², 25X100
∞ EPs: ES: 21 100°, 30 82° X-Cels: 9, 12, 18, 25 GSO:15,20
Image

I never met a scope I didn't want to keep. "My God, it's full of stars." Searching the skies since 1966!
User avatar
Caddman
Mars Ambassador
Articles: 0
Posts: 101
Joined: Sun May 12, 2019 12:48 am
2
Location: East Columbia Gorge Washington

TSS Awards Badges

TSS Photo of the Day

Re: Telescope Mount Payload Capacity

#7

Post by Caddman »

Initial reviews on the CGX-L claim that the 75 lb load is the astrophotography load. I personally don't have enough equipment to reach that weight. So, I can't personally verify the claim. However, I have seen a C14 mounted on the CGX carry out some impressive images at 60 seconds. The CGX is rated for about 55 lbs. The C14 weighs 45 lbs. That's well over half the rated capacity of the CGX.
Glenn

Telescopes; Stellarvue SVA130T, WO GT71, Orion SkyQuest XT10, Orion 10" f/3.9 Astrograph
Mounts; Atlas EQ-G, Celestron CGX-L
Binoculars; Oberwerk LW 11 X 70, Oberwerk 25 X 100
User avatar
Caddman
Mars Ambassador
Articles: 0
Posts: 101
Joined: Sun May 12, 2019 12:48 am
2
Location: East Columbia Gorge Washington

TSS Awards Badges

TSS Photo of the Day

Re: Telescope Mount Payload Capacity

#8

Post by Caddman »

Overall, I think that this is an excellent spreadsheet.
Thanks JT.
Glenn

Telescopes; Stellarvue SVA130T, WO GT71, Orion SkyQuest XT10, Orion 10" f/3.9 Astrograph
Mounts; Atlas EQ-G, Celestron CGX-L
Binoculars; Oberwerk LW 11 X 70, Oberwerk 25 X 100
User avatar
OzEclipse
Milky Way Ambassador
Articles: 0
Posts: 1044
Joined: Sat May 11, 2019 8:11 am
2
Location: Young, NSW, Australia, 34S, 148E
Contact:

TSS Awards Badges

TSS Photo of the Day

Re: Telescope Mount Payload Capacity

#9

Post by OzEclipse »

Thanks JT. Interesting.

It uses manufacturer specs only. As such it rates the iEQ45 above the EM-200. Having used both mounts, the EM-200 out of the box is much much more rigid and stable than the iEQ45. The iEQ45 tripod is not up to the job. I have not assessed the iEQ45 on a rigid pier.

Joe
"34 South: The Hilltops Observatory"
Central West NSW
AUSTRALIA
Joe Cali

Bortle 1-2 skies, 148 E, 34 S

Amateur astronomer since 1978
Astronomical interests : astrophotography, visual observing, nightscape photography, solar eclipse chasing
asteroidal occultations, nightscape astrophotography workshops

web site : http://joe-cali.com/
Scopes: ATM 18" Dob, Vixen VC200L, ATM 6"f7, ED80, M70, Orion 102 Maksutov, ST80.
Mounts: Takahashi EM-200, iOptron iEQ45, Push dobsonian with Nexus DSC, three homemade EQ's.
Eyepieces: TV 31, 17, 12, 7 Naglers; D21, D14 Denkmeier’s; Pentax XW10, XW5, Unitron 40mm Kellner, Meade Or 25,12
Cameras : Pentax K1, K5, K01, K10D / VIDEO CAMS : TacosBD, Lihmsec.
jbelden
Earth Ambassador
Articles: 0
Posts: 10
Joined: Thu May 21, 2020 4:22 am
1
Location: TX USA

Re: Telescope Mount Payload Capacity

#10

Post by jbelden »

The AP1600 is 220lbs per my manual. But, even with a 17 CDK riding on top(not my OTA yet), it isn't laboring.
My MX+ is rated at 100lbs imaging
My previous Mach1 could easily handle my C14, STL6303/FW8/AOX as well even though it wasn't rated for it, rated for 45lbs but I was over by a bit but did 30 min subs all the time

Joe
AP1600 GTO AE, AP1600 GTO, Paramount MX+, TOA130, 20" Obsession with ZOC mirror, Meade 14" ACF F8, STL6303E, ST8XME, STXL6303E, FLI Kepler KL400

Co-owner of RCOS 16" (Snowflake, AZ) :observatory:
User avatar
Lady Fraktor
Co-Administrator
Articles: 0
Posts: 6277
Joined: Mon Apr 29, 2019 9:14 pm
2
Location: Slovakia

Re: Telescope Mount Payload Capacity

#11

Post by Lady Fraktor »

I see they posted the wrong weight for the Vixen AXD as well, it is 30kg (66lb) photographic load not maximum capacity.

From the manual: Photographic loading weight- 30 kg (Maximum torque load): 750 kg/cm at a point of 25cm from the place where the R.A and Dec axes cross.
Telescopes: 1 more than I need but 2 less than I want
Mounts: 5 Equatorial, 3 Az/ Alt
Diagonal: 3 mirror, 2 Amici, 1 Herschel
Eyepieces: Possibly more than 1 person requires
Image
User avatar
JayTee
Co-Administrator
Articles: 1
Posts: 3582
Joined: Thu Apr 25, 2019 3:23 am
2
Location: Hayden, ID
Contact:

TSS Awards Badges

TSS Photo of the Day

Re: Telescope Mount Payload Capacity

#12

Post by JayTee »

This is from the Vixen site for the AXD:

High performance slewing
The stepper motors used in the AXD have sufficient torque to slew a payload of 30kg (66lb) at up to 800x sidereal rate.


I also looked up the AXD2 and it also showed 66lb as the max payload with no reference to it being a photographic payload.

I'd be interested in seeing what you are referencing?

Cheers,
JT
JT
∞ Scopes: Celestron CPC1100 #2 Scope: 8" f/7.5 Dob AP Scopes: TPO 6" f/9 RC, ES 80mm f/6 APO G&G Scopes: Meade 102mm f/7.8, Bresser 102mm f/4.5 Guide Scopes: 70 & 80mm fracs
∞ Mounts: iOptron CEM60, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: Canon T3i (x2), ZWO ASI294MC Pro & 120MC, Orion SSAG
∞ Binos: 10X50,10.5X70,15X70², 25X100
∞ EPs: ES: 21 100°, 30 82° X-Cels: 9, 12, 18, 25 GSO:15,20
Image

I never met a scope I didn't want to keep. "My God, it's full of stars." Searching the skies since 1966!
User avatar
Lady Fraktor
Co-Administrator
Articles: 0
Posts: 6277
Joined: Mon Apr 29, 2019 9:14 pm
2
Location: Slovakia

Re: Telescope Mount Payload Capacity

#13

Post by Lady Fraktor »

That is from the Vixen Optics website and I have no idea why he has it listed as such.
My SXP has a 33lb photographic load, the sentence I posted is straight out of the AXD manual.
Vixen mounts are normally listed by photographic weight instead of maximum capacity.
Vixen.png
Telescopes: 1 more than I need but 2 less than I want
Mounts: 5 Equatorial, 3 Az/ Alt
Diagonal: 3 mirror, 2 Amici, 1 Herschel
Eyepieces: Possibly more than 1 person requires
Image
User avatar
JayTee
Co-Administrator
Articles: 1
Posts: 3582
Joined: Thu Apr 25, 2019 3:23 am
2
Location: Hayden, ID
Contact:

TSS Awards Badges

TSS Photo of the Day

Re: Telescope Mount Payload Capacity

#14

Post by JayTee »

Wow, isn't that confusing. The manufacturer contradicts himself. I'll put a note in the spreadsheet about it being the photographic max payload.

Cheers,
JT
JT
∞ Scopes: Celestron CPC1100 #2 Scope: 8" f/7.5 Dob AP Scopes: TPO 6" f/9 RC, ES 80mm f/6 APO G&G Scopes: Meade 102mm f/7.8, Bresser 102mm f/4.5 Guide Scopes: 70 & 80mm fracs
∞ Mounts: iOptron CEM60, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: Canon T3i (x2), ZWO ASI294MC Pro & 120MC, Orion SSAG
∞ Binos: 10X50,10.5X70,15X70², 25X100
∞ EPs: ES: 21 100°, 30 82° X-Cels: 9, 12, 18, 25 GSO:15,20
Image

I never met a scope I didn't want to keep. "My God, it's full of stars." Searching the skies since 1966!
User avatar
JayTee
Co-Administrator
Articles: 1
Posts: 3582
Joined: Thu Apr 25, 2019 3:23 am
2
Location: Hayden, ID
Contact:

TSS Awards Badges

TSS Photo of the Day

Re: Telescope Mount Payload Capacity

#15

Post by JayTee »

So this is interesting which is why I just called the Vixen US office in Cali, unfortunately, no one answered. After doing some more research, only the Japan Vixen site lists the max payload as a "photographic" max payload. The US and UK websites list the 66lbs as merely the max (no photographic) payload. To me, this says the info on the Japan site is outvoted by the info on the US and UK sites. I'll still keep the note in the spreadsheet though.

The updated spreadsheet is in the first post of this thread.

JT
JT
∞ Scopes: Celestron CPC1100 #2 Scope: 8" f/7.5 Dob AP Scopes: TPO 6" f/9 RC, ES 80mm f/6 APO G&G Scopes: Meade 102mm f/7.8, Bresser 102mm f/4.5 Guide Scopes: 70 & 80mm fracs
∞ Mounts: iOptron CEM60, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: Canon T3i (x2), ZWO ASI294MC Pro & 120MC, Orion SSAG
∞ Binos: 10X50,10.5X70,15X70², 25X100
∞ EPs: ES: 21 100°, 30 82° X-Cels: 9, 12, 18, 25 GSO:15,20
Image

I never met a scope I didn't want to keep. "My God, it's full of stars." Searching the skies since 1966!
User avatar
Lady Fraktor
Co-Administrator
Articles: 0
Posts: 6277
Joined: Mon Apr 29, 2019 9:14 pm
2
Location: Slovakia

Re: Telescope Mount Payload Capacity

#16

Post by Lady Fraktor »

Well if you really want to scratch your head take a look at the SXP2 advertisement and the website (VixenOptics.com)

On the website it says the capacity is 22.6kg (50lb), in the manual is says: Maximum Payload- 16kg (35.2 lb), (400kg•cm torque load = About 16kg at a point of 25cm from the fulcrum)
The tech specs and manual are both from the american site.

Now I have the SXP and I can tell you from experience the actual maximum capacity is around 23kg (50lb)
Now my manual for the SXP (purchased in Canada) says the Photographic Payload weight is 17.6kg (39lb) and I regularly put a 17kg load on it and it is rock steady with no issues tracking or strain on the motors.
I have been viewing before and tapping the telescope tube and it hardly vibrates, you would have to hit it quite hard to get it to shake.
Telescopes: 1 more than I need but 2 less than I want
Mounts: 5 Equatorial, 3 Az/ Alt
Diagonal: 3 mirror, 2 Amici, 1 Herschel
Eyepieces: Possibly more than 1 person requires
Image
jbelden
Earth Ambassador
Articles: 0
Posts: 10
Joined: Thu May 21, 2020 4:22 am
1
Location: TX USA

Re: Telescope Mount Payload Capacity

#17

Post by jbelden »

I forgot to say that it is a nice collection of load data regardless of some of vendor ratings differences. I just try to get a load rating high enough so I have room for expansion. I just know that with my first AP Mach1 that AP said they are rather conservative on the load ratings because a 14" SCT will have less load inertia over a heavy long refractor.
That's sort of why I bought an AP1600 for the high load rating over my AP1100, well also I did get the Renishaw encoders to experience all the hub bub on doing unguided imaging but hindsight I wouldn't of bought them because OAG is easy with my current setup.

I remember my CGEM-DX fiasco, selected the DX over the standard CGEM based on the extra load rating but I could never get it dialed in even with a 8" AstroTech RC.(Dec cogging issue) while my astro buddy with his CGEM was actually getting some imaging in while I was talking bad to my mount.

Heck, I used to load up my old CG5 substantially over the limit but it worked rather well, just needed to get the balance on the money.


As mentioned, I know it will make a difference if you put a nice mount on a poorly made tripod.


CS,

Joe
AP1600 GTO AE, AP1600 GTO, Paramount MX+, TOA130, 20" Obsession with ZOC mirror, Meade 14" ACF F8, STL6303E, ST8XME, STXL6303E, FLI Kepler KL400

Co-owner of RCOS 16" (Snowflake, AZ) :observatory:
User avatar
mikemarotta
Orion Spur Ambassador
Articles: 0
Posts: 535
Joined: Sun Nov 17, 2019 2:37 pm
1
Location: Austin, Texas, USA
Contact:

TSS Awards Badges

Re: Telescope Mount Payload Capacity

#18

Post by mikemarotta »

Thanks, JayTee! This makes everything a little easier.
Mike M.
---------------------------------------------------------------
Michael E. Marotta
Astro-Tech 115 mm APO Refractor
Explore Scientific 102 mm Refractor
National Geographic 70 mm Refractor
Plössls from 40 to 6 mm
Nagler Series-1 7mm. nonMeade 14 mm.
Member: AAS BAA SPA ASP ALPO AL
Editor AAS History of Astronomy Division
----------------------------------------------------------------
User avatar
SkyHiker
Milky Way Ambassador
Articles: 0
Posts: 1140
Joined: Sat May 11, 2019 8:40 pm
2
Location: Santa Barbara, CA

TSS Photo of the Day

Re: Telescope Mount Payload Capacity

#19

Post by SkyHiker »

The Losmandy G11 is listed in the spreadsheet as having 30 lbs. AP capacity. The Losmandy website says it's 60 lbs. for AP, which I believe because I use mine with a 48 lbs. Newt astrograph plus a few pounds of Paracorr 2, ASI2600MC, OAG and autofocuser totaling over 50 something lbs. It appears to be working fine so I go with the 60 lbs. number. It's why I bought it. So I take that spreadsheet with a grain of salt.
... Henk. :D Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Barndoor trackers for 10" Dob and camera, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x Pi2b all running Astroberry, Toshiba Satellite 17"
Post Reply

Return to “Other brands of mounts”