My 12" F/4 GSO astrograph
- helicon
- Co-Administrator
- Articles: 592
- Posts: 12356
- Joined: Mon May 06, 2019 1:35 pm
- 4
- Location: Washington
- Status:
Offline
-
TSS Awards Badges
Re: My 12" F/4 GSO astrograph
Fantastic set-up Henk. Time to collect some photons.
-Michael
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
- Bigzmey
- Moderator
- Articles: 8
- Posts: 7645
- Joined: Sat May 11, 2019 7:55 pm
- 4
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: My 12" F/4 GSO astrograph
Go big or go home! Congrats Henk! Waiting for the first images from the beast.
Scopes: Stellarvue: SV102ED; Celestron: 9.25" EdgeHD, 8" SCT, 150ST, Onyx 80ED; iOptron: Hankmeister 6" Mak; SW: 7" Mak; Meade: 80ST.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2437, Comets: 34, Asteroids: 257
- SkyHiker
- Local Group Ambassador
- Articles: 0
- Posts: 2293
- Joined: Sat May 11, 2019 8:40 pm
- 4
- Location: Santa Barbara, CA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: My 12" F/4 GSO astrograph
Yes the spring loaded worms and look of the OnStep controller definitely have my signature on it, lol. It's fun to go the cheapskate route and add DIY features but of course this adds more to be debugged.
The spring loaded worms are something that comes standard with Losmandy mounts now. I did not want to send my mount back so I DIY-ed it in my own way. The outer bottom screw is loose so the sheet metal clamp pushes the worm in, and the spring pushes the worm tangentially. This is what users would do when adjusting the worm manually except it is now done constantly without tightening the screws. It fixed the binding issues that I had, which were a major PITA beyond my own fault (unless you believe that a mount should be sloppy and counterweighted).
The OnStep controller is a very simple one, it just takes care of the motors and Bluetooth (cell phone for a hand controller) none of the extra stuff. I let Ekos add the high level features such as setting the time/location, alignment plate solving, guiding, planetarium control, etcetera. It works very well IMHO. Mine have TMC2130 stepper driver boards with mode switching. I have yet to find out if this system limits the resolution. This scope will let me find out pretty quick what the issues are, if any.
... Henk. Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
- SkyHiker
- Local Group Ambassador
- Articles: 0
- Posts: 2293
- Joined: Sat May 11, 2019 8:40 pm
- 4
- Location: Santa Barbara, CA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: My 12" F/4 GSO astrograph
After all this chatter the fearful moment arrived where I should show some results. I’m pleased with what I got given the circumstances:
- I had not checked the collimation since Agena Astro said they did it (it was probably OK)
- I did not put my Paracorr 2 CC on it yet, while the image clearly needed it atF/ 4
- It was rather windy and not super clear, somewhat humid higher up I think
- I had to get the newPi 4B configured and hooked up
- I was working with my trusted Fuji X-a1 that I cannot control from Ekos (no gPhoto support)
- Aligning the guider with my camera was therefore a pain
- Astroberry did not pre-install the index files so only the online astro.net worked
The stats are
- Fuji X-a1 @ 6400 ISO, G11S, OnStep, Ekos,DSS , Gimp
- 87x58 s lights, 15 flats
Unfortunate side effects:
- Huge gradients that I had to remove. What’s up with my camera or theOTA or the new LED street lights?
- Blurry stars since the guiding had a total RMS of 2” to 3” (!! ugh it did not even fit on the scale)
If I hadPI I could probably fix the stars or alternatively, remove them with Starnet++ then add them back in from a less stretched version so they are smaller. But this is a first light so I did not bother.
Here’s theDSS version where you can see the gradient:
The jump in this image is because I re-centered after the first couple of shots. Here you can see thecoma very clearly so the Paracorr 2 will be on it the next time, assuming I have all the right adapters and it fits.
You can also see the fat stars. Some of it is due to the wind, no doubt. But I never fully debugged this in Ekos. What I may do tonight is just run the autoguider by itself – no scope. Then test all the autoguiders included in Ekos: The native one, PHD2 and lin_guider. I could not find any adjustments for the internal guider other than the size of the box. The other two have several parameters so I will play around with them tonight. Hopefully this is not due to the OnStep controller (stepper motors, driver boards) or the G11S with the DIY spring loaded worms.
I will also insert thePi 4B on the board where the Pi 2B sits now. I will keep the Pi 2B handy just in case it turns out that the Pi 4B uses too much power for field use. Swapping them should be easy.
Plenty of things to try and improve on. Anyway this was the first light, I have some work to do and will continue in other threads once things are dialed in.
PS : One thing I just noticed - I never tightened the Az screws after PA. That makes the mount looser than it should be especially when slewing.
- I had not checked the collimation since Agena Astro said they did it (it was probably OK)
- I did not put my Paracorr 2 CC on it yet, while the image clearly needed it at
- It was rather windy and not super clear, somewhat humid higher up I think
- I had to get the new
- I was working with my trusted Fuji X-a1 that I cannot control from Ekos (no gPhoto support)
- Aligning the guider with my camera was therefore a pain
- Astroberry did not pre-install the index files so only the online astro.net worked
The stats are
- Fuji X-a1 @ 6400 ISO, G11S, OnStep, Ekos,
- 87x58 s lights, 15 flats
Unfortunate side effects:
- Huge gradients that I had to remove. What’s up with my camera or the
- Blurry stars since the guiding had a total RMS of 2” to 3” (!! ugh it did not even fit on the scale)
If I had
Here’s the
The jump in this image is because I re-centered after the first couple of shots. Here you can see the
You can also see the fat stars. Some of it is due to the wind, no doubt. But I never fully debugged this in Ekos. What I may do tonight is just run the autoguider by itself – no scope. Then test all the autoguiders included in Ekos: The native one, PHD2 and lin_guider. I could not find any adjustments for the internal guider other than the size of the box. The other two have several parameters so I will play around with them tonight. Hopefully this is not due to the OnStep controller (stepper motors, driver boards) or the G11S with the DIY spring loaded worms.
I will also insert the
Plenty of things to try and improve on. Anyway this was the first light, I have some work to do and will continue in other threads once things are dialed in.
... Henk. Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
- yobbo89
- Moderator
- Articles: 0
- Posts: 2587
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: My 12" F/4 GSO astrograph
Other then the rms, not bad on the guiding,seems to be going back on track,round stars ect. Some psf ,deconvolution should definitely tighten up those stars. Maybe some tuning on the guiding exp time and pulse settings ?
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- SkyHiker
- Local Group Ambassador
- Articles: 0
- Posts: 2293
- Joined: Sat May 11, 2019 8:40 pm
- 4
- Location: Santa Barbara, CA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: My 12" F/4 GSO astrograph
Thanks Rob. I see several options that I want explore running with just a guide scope, no
... Henk. Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute