USB C and Skywatcher EQ-6r Pro
- starfield
- Milky Way Ambassador
- Articles: 0
- Posts: 1025
- Joined: Fri Aug 30, 2019 3:22 pm
- 4
- Location: San Diego
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
AP Processing Challenge
USB C and Skywatcher EQ-6r Pro
Hi all.
I just got a new laptop to run my setup that uses the new USB C style ports. Went out the other night to try and hook it up to my EQ6R Pro thru the hand-controller. Neither SharpCap or PHD2 can see the mount. Windows is seeing the port as I can watch it pop-up in device manager when I plug it in. I loaded all the same drivers as my other machine (an older dell). Also swapped cables and made sure it was working. Machine has no problem seeing my camera.
At a bit of a loss on how to troubleshoot this. Wondering if there's an issue with USB C? Wouldn't expect this...but never know.
Thanks for any help or ideas.
I just got a new laptop to run my setup that uses the new USB C style ports. Went out the other night to try and hook it up to my EQ6R Pro thru the hand-controller. Neither SharpCap or PHD2 can see the mount. Windows is seeing the port as I can watch it pop-up in device manager when I plug it in. I loaded all the same drivers as my other machine (an older dell). Also swapped cables and made sure it was working. Machine has no problem seeing my camera.
At a bit of a loss on how to troubleshoot this. Wondering if there's an issue with USB C? Wouldn't expect this...but never know.
Thanks for any help or ideas.
Scopes: Esprit 100, 12.5" Telekit Dob
Camera: 294 MC Pro, 224 mc, 2600mm
Guiding: ZWO 290 mini on 120mm guide scope
Mounts: EQ6R-Pro, EQ Platform.
Filters: Optolong L-Pro & L-Enhance, Chroma 36mm LRGB, 5nm HA, 3nm OIII, 3nm SII.
Software: SharpCap, SGP, StarTools 1.7, Photoshop, Pixinsight
The Death Star Observatory
Astro Photos:https://www.astrobin.com/users/starfield/
Camera: 294 MC Pro, 224 mc, 2600mm
Guiding: ZWO 290 mini on 120mm guide scope
Mounts: EQ6R-Pro, EQ Platform.
Filters: Optolong L-Pro & L-Enhance, Chroma 36mm LRGB, 5nm HA, 3nm OIII, 3nm SII.
Software: SharpCap, SGP, StarTools 1.7, Photoshop, Pixinsight
The Death Star Observatory
Astro Photos:https://www.astrobin.com/users/starfield/
- yobbo89
- Moderator
- Articles: 0
- Posts: 2595
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Online
-
TSS Photo of the Day
Re: USB C and Skywatcher EQ-6r Pro
it should work, all my other gear work of usb-c to normal usb with an adapter, haven't tried my mount on it though
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- starfield
- Milky Way Ambassador
- Articles: 0
- Posts: 1025
- Joined: Fri Aug 30, 2019 3:22 pm
- 4
- Location: San Diego
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
AP Processing Challenge
Re: USB C and Skywatcher EQ-6r Pro
So finally solved this. I needed to go into ASCOM diagnostics to enter mount/telescope info. Driver wouldn’t work until this step was completed even though it showed up in Sharpcap.
Scopes: Esprit 100, 12.5" Telekit Dob
Camera: 294 MC Pro, 224 mc, 2600mm
Guiding: ZWO 290 mini on 120mm guide scope
Mounts: EQ6R-Pro, EQ Platform.
Filters: Optolong L-Pro & L-Enhance, Chroma 36mm LRGB, 5nm HA, 3nm OIII, 3nm SII.
Software: SharpCap, SGP, StarTools 1.7, Photoshop, Pixinsight
The Death Star Observatory
Astro Photos:https://www.astrobin.com/users/starfield/
Camera: 294 MC Pro, 224 mc, 2600mm
Guiding: ZWO 290 mini on 120mm guide scope
Mounts: EQ6R-Pro, EQ Platform.
Filters: Optolong L-Pro & L-Enhance, Chroma 36mm LRGB, 5nm HA, 3nm OIII, 3nm SII.
Software: SharpCap, SGP, StarTools 1.7, Photoshop, Pixinsight
The Death Star Observatory
Astro Photos:https://www.astrobin.com/users/starfield/
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute