EQ6 R Pro Usb integrated burning

Discuss Skywatcher mounts.
Post Reply
tayfun
Earth Ambassador
Articles: 0
Offline
Posts: 5
Joined: Fri Jul 09, 2021 11:14 pm
2
Location: Türkiye
Status:
Offline

EQ6 R Pro Usb integrated burning

#1

Post by tayfun »


Friends, first of all, I apologize for English.I used a translation program.I burned the motherboard 3 times.1.short circuit 2.USB port not working and then short circuit 3.as last month, I bought the motherboard usb port again to give a malfunction.I can't understand why.I use 4 aqueous batteries.12 volts 24 amps each.I have 2 lighter outlets.One for eq and the other for Rebel air and other equipment.it uses pl2303gl integrated.I've had to get this integrated many times.What's the reason it's malfunctioning so much?I'm at the point of giving up.I'm losing an incredible amount of money.My currency is very much against the dollar it's worthless, and every time half my salary goes for this card.Thanks for your help
User avatar
Graeme1858 Great Britain
Co-Administrator
Co-Administrator
Articles: 1
Offline
Posts: 7217
Joined: Mon Jun 24, 2019 7:16 pm
4
Location: North Kent, UK
Status:
Offline

TSS Awards Badges

TSS Photo of the Day

I Broke The Forum.

Re: EQ6 R Pro Usb integrated burning

#2

Post by Graeme1858 »


tayfun wrote: Fri Jul 09, 2021 11:36 pm Friends, first of all, I apologize for English.I used a translation program.I burned the motherboard 3 times.

Hello Tayfun

Could you post a photo of your setup?

You have four 12 volt batteries, how are you connecting them?

Have you measured the voltage and polarity on the plug that feeds into the mount?

Welcome to the forum.

Regards

Graeme
______________________________________________
Celestron 9.25 f10 SCT, f6.3FR, CGX mount.
ASI1600MM Pro, ASI294MC Pro, ASI224MC
ZWO EFW, ZWO OAG, ASI220MM Mini.
APM 11x70 ED APO Binoculars.

https://www.averywayobservatory.co.uk/
tayfun
Earth Ambassador
Articles: 0
Offline
Posts: 5
Joined: Fri Jul 09, 2021 11:14 pm
2
Location: Türkiye
Status:
Offline

Re: EQ6 R Pro Usb integrated burning

#3

Post by tayfun »


Thank you for the reply.I have 4 batteries and 4 keys.I can turn it on and off separately.The telescope works, but somehow the usb integrated lights up.And then there's the inverter.

https://ibb.co/ZX9ZcMx

https://ibb.co/yYZQZfg

https://ibb.co/PzLJhTt

https://ibb.co/W5H7W2j

https://ibb.co/dmvSm8M

https://ibb.co/Wp7k3Rt

https://ibb.co/bKtwc0Y
User avatar
yobbo89 Australia
Moderator
Moderator
Articles: 0
Online
Posts: 2560
Joined: Sat May 11, 2019 7:44 pm
4
Location: australia qld brisbane
Status:
Online

TSS Photo of the Day

Re: EQ6 R Pro Usb integrated burning

#4

Post by yobbo89 »


your images didn't upload. you might have to link from an upload site . are you running the batteries in parrelle ? if you are in series then that would cause dammage if they are 12v batteries . hopefully pictures will help us . do you have any images of your dammaged boards ?
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .

Image
tayfun
Earth Ambassador
Articles: 0
Offline
Posts: 5
Joined: Fri Jul 09, 2021 11:14 pm
2
Location: Türkiye
Status:
Offline

Re: EQ6 R Pro Usb integrated burning

#5

Post by tayfun »


https://drive.google.com/drive/folders/ ... sp=sharing

There's no visible damage to the card, it just doesn't recognize the usb port.That's why I can't control the telescope.Cards seen in photos are damaged ones
tayfun
Earth Ambassador
Articles: 0
Offline
Posts: 5
Joined: Fri Jul 09, 2021 11:14 pm
2
Location: Türkiye
Status:
Offline

Re: EQ6 R Pro Usb integrated burning

#6

Post by tayfun »


I fixed the problem guys.With an old driver(PL2303_Prolific_DriverInstaller_v1.12.0).I made the connection from the hand control.Baud 9600.I am sharing the driver in my telescope. For those who have this kind of problem.Thank you very much for your interest.
https://drive.google.com/drive/folders/ ... sp=sharing
User avatar
yobbo89 Australia
Moderator
Moderator
Articles: 0
Online
Posts: 2560
Joined: Sat May 11, 2019 7:44 pm
4
Location: australia qld brisbane
Status:
Online

TSS Photo of the Day

Re: EQ6 R Pro Usb integrated burning

#7

Post by yobbo89 »


I reckon it's your power supply causing the damage or the ra motor you can see the 12volt terminal burnt and the voltage controller on the left of the r270 ristor at the top .

and the bottom picture the right ascention motor terminal is brunt at the bottom .
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .

Image
tayfun
Earth Ambassador
Articles: 0
Offline
Posts: 5
Joined: Fri Jul 09, 2021 11:14 pm
2
Location: Türkiye
Status:
Offline

Re: EQ6 R Pro Usb integrated burning

#8

Post by tayfun »


Thank you, I want to have these two cards made, is there a repairman you can recommend? Or should I send it to the company?
User avatar
Graeme1858 Great Britain
Co-Administrator
Co-Administrator
Articles: 1
Offline
Posts: 7217
Joined: Mon Jun 24, 2019 7:16 pm
4
Location: North Kent, UK
Status:
Offline

TSS Awards Badges

TSS Photo of the Day

I Broke The Forum.

Re: EQ6 R Pro Usb integrated burning

#9

Post by Graeme1858 »


yobbo89 wrote: Mon Jul 12, 2021 5:35 pm I reckon it's your power supply causing the damage or the ra motor you can see the 12volt terminal burnt and the voltage controller on the left of the r270 ristor at the top .

and the bottom picture the right ascention motor terminal is brunt at the bottom .

That's a very keen eye you have there Rob!

Regards

Graeme
______________________________________________
Celestron 9.25 f10 SCT, f6.3FR, CGX mount.
ASI1600MM Pro, ASI294MC Pro, ASI224MC
ZWO EFW, ZWO OAG, ASI220MM Mini.
APM 11x70 ED APO Binoculars.

https://www.averywayobservatory.co.uk/
Post Reply

Create an account or sign in to join the discussion

You need to be a member in order to post a reply

Create an account

Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute

Register

Sign in

Return to “Skywatcher mounts”