Need help with collimation of my nexstar 130 telescope
- quinnder1
- Earth Ambassador
- Articles: 0
- Posts: 1
- Joined: Tue Jul 27, 2021 5:24 pm
- 2
- Location: USA
- Status:
Offline
Need help with collimation of my nexstar 130 telescope
Hello, below i attached a image through my collimation eye piece, i have been messing around with it for awhile and this is the best i got it. but you will see that the white ring that indicates the center of the primary mirror is off by a bit, i am sure this is not good for the quality of my viewings. i do not know how to fix this, and i would appreciate any advice. thank you.
- helicon
- Co-Administrator
- Articles: 592
- Posts: 12355
- Joined: Mon May 06, 2019 1:35 pm
- 4
- Location: Washington
- Status:
Online
-
TSS Awards Badges
Re: Need help with collimation of my nexstar 130 telescope
Welcome to TSS Quinnder1! I'm sure some folks will be along to help answer your question.
-Michael
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
- Juno16
- Universal Ambassador
- Articles: 0
- Posts: 8210
- Joined: Sun May 12, 2019 3:13 pm
- 4
- Location: Mississippi Gulf Coast
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Need help with collimation of my nexstar 130 telescope
Hi quinnder1,
Did you run out of screw threads preventing you from centering the mirror?
If so, you might have to back all three off and start over.
I haven’t touched my 130 SLT in awhile, but you are loosening the three taller knurled screws and adjusting the three wider and shorter knurled screws?
Did you run out of screw threads preventing you from centering the mirror?
If so, you might have to back all three off and start over.
I haven’t touched my 130 SLT in awhile, but you are loosening the three taller knurled screws and adjusting the three wider and shorter knurled screws?
Jim
Scopes: Explore Scientific ED102 APO, Sharpstar 61 EDPH II APO, Samyang 135 F2 (still on the Nikon).
Mount: Skywatcher HEQ5 Pro with Rowan Belt Mod
Stuff: ASI EAF Focus Motor (x2), ZWO OAG, ZWO 30 mm Guide Scope, ASI 220mm min, ASI 120mm mini, Stellarview 0.8 FR/FF, Sharpstar 0.8 FR/FF, Mele Overloock 3C.
Camera/Filters/Software: ASI 533 mc pro, ASI 120mm mini, ASI 220mm mini , IDAS LPS D-1, Optolong L-Enhance, ZWO UV/IR Cut, N.I.N.A., Green Swamp Server, PHD2, Adobe Photoshop CC, Pixinsight.
Dog and best bud: Jack
Sky: Bortle 6-7
My Astrobin: https://www.astrobin.com/users/Juno16/
Scopes: Explore Scientific ED102 APO, Sharpstar 61 EDPH II APO, Samyang 135 F2 (still on the Nikon).
Mount: Skywatcher HEQ5 Pro with Rowan Belt Mod
Stuff: ASI EAF Focus Motor (x2), ZWO OAG, ZWO 30 mm Guide Scope, ASI 220mm min, ASI 120mm mini, Stellarview 0.8 FR/FF, Sharpstar 0.8 FR/FF, Mele Overloock 3C.
Camera/Filters/Software: ASI 533 mc pro, ASI 120mm mini, ASI 220mm mini , IDAS LPS D-1, Optolong L-Enhance, ZWO UV/IR Cut, N.I.N.A., Green Swamp Server, PHD2, Adobe Photoshop CC, Pixinsight.
Dog and best bud: Jack
Sky: Bortle 6-7
My Astrobin: https://www.astrobin.com/users/Juno16/
- OzEclipse
- Moderator
- Articles: 2
- Posts: 2377
- Joined: Sat May 11, 2019 8:11 am
- 4
- Location: Young, NSW, Australia, 34S, 148E
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
Re: Need help with collimation of my nexstar 130 telescope
Hi Quinnder1,
In the photo below, the outer white circle is on that I have drawn centred on the centre of the image of your collimating eyepiece. It should be concentric with the primary.
I think most of this can be fixed some minor adjustment of the secondary mirror.
Moving the secondary centres the image of the main mirror in the secondary mirror and centres your eye or the collimating cross in the centre. Moving the primary centres the black silhouette of the spider in the circular outline of the secondary.
Collimating a Newtonian
https://joe-cali.com/astronomy/articles ... onian.html
Joe
In the photo below, the outer white circle is on that I have drawn centred on the centre of the image of your collimating eyepiece. It should be concentric with the primary.
I think most of this can be fixed some minor adjustment of the secondary mirror.
Moving the secondary centres the image of the main mirror in the secondary mirror and centres your eye or the collimating cross in the centre. Moving the primary centres the black silhouette of the spider in the circular outline of the secondary.
Collimating a Newtonian
https://joe-cali.com/astronomy/articles ... onian.html
Joe
Last edited by OzEclipse on Wed Jul 28, 2021 4:42 am, edited 1 time in total.
Amateur astronomer since 1978...................Web site : http://joe-cali.com/
Scopes: ATM 18" Dob, Vixen VC200L, ATM 6"f7, Stellarvue 102ED, Saxon ED80, WO M70 ED, Orion 102 Maksutov, ST80.
Mounts: Takahashi EM-200, iOptron iEQ45, Push dobsonian with Nexus DSC, three homemade EQ's.
Eyepieces: TV Naglers 31, 17, 12, 7; Denkmeier D21 & D14; Pentax XW10, XW5, Unitron 40mm Kellner, Meade Or 25,12
Cameras : Pentax K1, K5, K01, K10D / VIDEO CAMS : TacosBD, Lihmsec.
Cam/guider/controllers: Lacerta MGEN 3, SW Synguider, Simulation Curriculum SkyFi 3+Sky safari
Memberships Astronomical Association of Queensland; RASNZ Occultations Section; Single Exposure Milky Way Facebook Group (Moderator) (12k members), The Sky Searchers (moderator)
- AstroBee
- Moderator
- Articles: 0
- Posts: 2253
- Joined: Thu Nov 14, 2019 11:03 pm
- 4
- Location: Henderson, NV
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
Re: Need help with collimation of my nexstar 130 telescope
Joe beat me to it. Adjust the secondary mirror as he states to get the inner, lighter-colored circle (The primary) centered on the larger, darker-colored circle which is the shadow or silhouette of the secondary mirror. From there it should be very minor adjustments to the primary mirror. I'm not familiar with the configuration of the collimation and set screws but follow Jim's advice on making adjustments to the primary. make sure you are not confusing the set screws with adjustment screws.
Greg M.~ "Ad Astra per Aspera"
Scopes: Celestron EdgeHD14", Explore Scientific ED152CF & ED127 APO's, StellarVue SV70T, Classic Orange-Tube C-8, Lunt 80mm Ha double-stack solar scope.
Mounts: Astro-Physics Mach One, iOptron CEM70EC Mount, iOptron ZEQ25 Mount.
Cameras: ZWO ASI2600mm Pro, ZWO 2600MC Pro, ZWO ASI1600mm
Filters: 36mm Chroma LRGB & 3nm Ha, OIII, SII, L-Pro, L-eXtreme
Eyepieces: 27mm TeleVue Panoptic, 4mm TeleVue Radian, Explore Scientific 82° 30mm, 6.7mm , Baader 13mm Hyperion, Explore Scientific 70° 10mm, 15mm, 20mm, Meade 8.8mm UWA
Software: N.I.N.A., SharpCapPro, PixInsight, PhotoShop CC, Phd2, Stellarium
https://www.nevadadesertskies.com
Scopes: Celestron EdgeHD14", Explore Scientific ED152CF & ED127 APO's, StellarVue SV70T, Classic Orange-Tube C-8, Lunt 80mm Ha double-stack solar scope.
Mounts: Astro-Physics Mach One, iOptron CEM70EC Mount, iOptron ZEQ25 Mount.
Cameras: ZWO ASI2600mm Pro, ZWO 2600MC Pro, ZWO ASI1600mm
Filters: 36mm Chroma LRGB & 3nm Ha, OIII, SII, L-Pro, L-eXtreme
Eyepieces: 27mm TeleVue Panoptic, 4mm TeleVue Radian, Explore Scientific 82° 30mm, 6.7mm , Baader 13mm Hyperion, Explore Scientific 70° 10mm, 15mm, 20mm, Meade 8.8mm UWA
Software: N.I.N.A., SharpCapPro, PixInsight, PhotoShop CC, Phd2, Stellarium
https://www.nevadadesertskies.com
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute