Mount
- tomthetank
- Earth Ambassador
- Articles: 0
- Posts: 21
- Joined: Sat Sep 05, 2020 2:29 am
- 3
- Location: united states
- Status:
Offline
Mount
Need help please there are different mount brackets this one wasn't listed .using with a HD tripod for now. Wasn't sure if correct thanks in advance. Tom
- SkyHiker
- Local Group Ambassador
- Articles: 0
- Posts: 2293
- Joined: Sat May 11, 2019 8:40 pm
- 4
- Location: Santa Barbara, CA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Mount
That looks like a Losmandy dovetail but it could be a Vixen. Either way it's fairly standard for a mount. I'm not sure what you're asking but it sounds like you mount it on a photographic tripod. Such a nice Stellarvue scope should be on a mount not a tripod.
... Henk. Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
- tomthetank
- Earth Ambassador
- Articles: 0
- Posts: 21
- Joined: Sat Sep 05, 2020 2:29 am
- 3
- Location: united states
- Status:
Offline
Re: Mount
Yup putting on a heavy duty tripod used for a video camera wasn't sure if plate was on correct. Its from stellavue t9 I believe. Thanks tom
- Lola Bruce
- Moon Ambassador
- Articles: 0
- Posts: 67
- Joined: Sat Jun 22, 2019 9:05 pm
- 4
- Location: So Cal USA
- Status:
Offline
- Lady Fraktor
- Universal Ambassador
- Articles: 0
- Posts: 9965
- Joined: Mon Apr 29, 2019 9:14 pm
- 4
- Location: Slovakia
- Status:
Offline
Re: Mount
Hello Tom, two items.
1. Place the tube clamps in the slotted section so things can move as you will need to find the balance point.
2. You have the plate upside down from what I can tell in the image. (Thin slot goes to the bottom with a Losmandy style plate.
1. Place the tube clamps in the slotted section so things can move as you will need to find the balance point.
2. You have the plate upside down from what I can tell in the image. (Thin slot goes to the bottom with a Losmandy style plate.
Gabrielle
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1011110)
The only culture I have is from yogurt
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1011110)
The only culture I have is from yogurt
- tomthetank
- Earth Ambassador
- Articles: 0
- Posts: 21
- Joined: Sat Sep 05, 2020 2:29 am
- 3
- Location: united states
- Status:
Offline
Re: Mount
thank you appreciate the info also if i flip plate aroung, the screws don't get anywhere close to grabbing the the tube clamps . the way in picture the screws fall in screw hole and grab rings
- Lady Fraktor
- Universal Ambassador
- Articles: 0
- Posts: 9965
- Joined: Mon Apr 29, 2019 9:14 pm
- 4
- Location: Slovakia
- Status:
Offline
Re: Mount
It will not attach to the mount that way though, you will need to purchase some longer bolts.tomthetank wrote: ↑Thu Apr 15, 2021 6:44 am thank you appreciate the info also if i flip plate aroung, the screws don't get anywhere close to grabbing the the tube clamps . the way in picture the screws fall in screw hole and grab rings
Gabrielle
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1011110)
The only culture I have is from yogurt
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1011110)
The only culture I have is from yogurt
- tomthetank
- Earth Ambassador
- Articles: 0
- Posts: 21
- Joined: Sat Sep 05, 2020 2:29 am
- 3
- Location: united states
- Status:
Offline
- AstroBee
- Moderator
- Articles: 0
- Posts: 2254
- Joined: Thu Nov 14, 2019 11:03 pm
- 4
- Location: Henderson, NV
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Mount
I'm late to the game but seems everyone has answered your questions.
That is definitely a Losmandy style plate and you definitely have it on upside down.
The screws "should" still fit if you are attempting to place them in the correct slots but as @Lady Fraktor has already mentioned, it will not fit into a standard mount dovetail this way so longer bolts may be needed. Careful they are not too long as they will penetrate the felt liner on the rings and dent/damage your optical tube.
Also, some smaller mounts will not accept the Losmandy style plate, only the narrower Vixen-style plate. What telescope mount do you have?
That is definitely a Losmandy style plate and you definitely have it on upside down.
The screws "should" still fit if you are attempting to place them in the correct slots but as @Lady Fraktor has already mentioned, it will not fit into a standard mount dovetail this way so longer bolts may be needed. Careful they are not too long as they will penetrate the felt liner on the rings and dent/damage your optical tube.
Also, some smaller mounts will not accept the Losmandy style plate, only the narrower Vixen-style plate. What telescope mount do you have?
Greg M.~ "Ad Astra per Aspera"
Scopes: Celestron EdgeHD14", Explore Scientific ED152CF & ED127 APO's, StellarVue SV70T, Classic Orange-Tube C-8, Lunt 80mm Ha double-stack solar scope.
Mounts: Astro-Physics Mach One, iOptron CEM70EC Mount, iOptron ZEQ25 Mount.
Cameras: ZWO ASI2600mm Pro, ZWO 2600MC Pro, ZWO ASI1600mm
Filters: 36mm Chroma LRGB & 3nm Ha, OIII, SII, L-Pro, L-eXtreme
Eyepieces: 27mm TeleVue Panoptic, 4mm TeleVue Radian, Explore Scientific 82° 30mm, 6.7mm , Baader 13mm Hyperion, Explore Scientific 70° 10mm, 15mm, 20mm, Meade 8.8mm UWA
Software: N.I.N.A., SharpCapPro, PixInsight, PhotoShop CC, Phd2, Stellarium
https://www.nevadadesertskies.com
Scopes: Celestron EdgeHD14", Explore Scientific ED152CF & ED127 APO's, StellarVue SV70T, Classic Orange-Tube C-8, Lunt 80mm Ha double-stack solar scope.
Mounts: Astro-Physics Mach One, iOptron CEM70EC Mount, iOptron ZEQ25 Mount.
Cameras: ZWO ASI2600mm Pro, ZWO 2600MC Pro, ZWO ASI1600mm
Filters: 36mm Chroma LRGB & 3nm Ha, OIII, SII, L-Pro, L-eXtreme
Eyepieces: 27mm TeleVue Panoptic, 4mm TeleVue Radian, Explore Scientific 82° 30mm, 6.7mm , Baader 13mm Hyperion, Explore Scientific 70° 10mm, 15mm, 20mm, Meade 8.8mm UWA
Software: N.I.N.A., SharpCapPro, PixInsight, PhotoShop CC, Phd2, Stellarium
https://www.nevadadesertskies.com
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute