Looking for an adapter from M42 to a 2" eyepiece
- man1
- Moon Ambassador
- Articles: 0
- Posts: 74
- Joined: Mon Sep 09, 2019 7:58 am
- 4
- Location: Canada
- Status:
Offline
Looking for an adapter from M42 to a 2" eyepiece
Hi,
I have an old (very high quality f=400mm 1:5.6) camera lens that fits my Pentax Spotmatic-F and I am trying to find an adapter that converts from the M42 (screw-type) camera format... to accept a 2" eyepiece. Is there such a beast out there? Any help would be much appreciated.
Thanks, man1
I have an old (very high quality f=400mm 1:5.6) camera lens that fits my Pentax Spotmatic-F and I am trying to find an adapter that converts from the M42 (screw-type) camera format... to accept a 2" eyepiece. Is there such a beast out there? Any help would be much appreciated.
Thanks, man1
Orion XT10i custom, Orion GiantView BT-70, Bushnell Natureview 20-60x65, Barska 25-125x80
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
- yobbo89
- Moderator
- Articles: 0
- Posts: 2561
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: Looking for an adapter from M42 to a 2" eyepiece
https://agenaastro.com/blue-fireball-2- ... -back.html
You might need a double side m42 male adapter aswell
You might need a double side m42 male adapter aswell
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- man1
- Moon Ambassador
- Articles: 0
- Posts: 74
- Joined: Mon Sep 09, 2019 7:58 am
- 4
- Location: Canada
- Status:
Offline
Re: Looking for an adapter from M42 to a 2" eyepiece
Thank You so much, that is exactly what I need The T2 version has the female thread already. The telephoto lens at the end is a male thread. I have tested an Orion Deepview 35mm combo with that tele lens and it works great.yobbo89 wrote: ↑Thu Sep 26, 2019 7:17 am https://agenaastro.com/blue-fireball-2- ... -back.html
You might need a double side m42 male adapter as well
I just ordered the part.... Thank You!!!!!
Cheers
Orion XT10i custom, Orion GiantView BT-70, Bushnell Natureview 20-60x65, Barska 25-125x80
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
- yobbo89
- Moderator
- Articles: 0
- Posts: 2561
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: Looking for an adapter from M42 to a 2" eyepiece
You'll have to post your setup when you get your adapter, will you be doing visual with it? I think i seen a pic or two online with a eyepiece on a camera lense, i wounder what it takes to get it into focus,, i wounder if a low profile adapter will be good for 2" adapter ccd /cmos cameras
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- man1
- Moon Ambassador
- Articles: 0
- Posts: 74
- Joined: Mon Sep 09, 2019 7:58 am
- 4
- Location: Canada
- Status:
Offline
Re: Looking for an adapter from M42 to a 2" eyepiece
Sure - I will post some pictures. I have no problems to get it in focus (by holding both pieces flush together), when the T2 adapter is installed I will unscrew the bottom end of the 35mm Orion DeepView eyepiece. This will make up for the extra length that will be added by the T2 adapter. I am really looking forward to this, it makes good use of an old tele lens that other wise would collect dust. It works amazingly well, I will also try my ZWO camera with this setup. I am pretty sure that one will work as well.yobbo89 wrote: ↑Fri Sep 27, 2019 5:17 am You'll have to post your setup when you get your adapter, will you be doing visual with it? I think i seen a pic or two online with a eyepiece on a camera lense, i wounder what it takes to get it into focus,, i wounder if a low profile adapter will be good for 2" adapter ccd/cmos cameras
Cheers.... Manfred
Orion XT10i custom, Orion GiantView BT-70, Bushnell Natureview 20-60x65, Barska 25-125x80
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
- man1
- Moon Ambassador
- Articles: 0
- Posts: 74
- Joined: Mon Sep 09, 2019 7:58 am
- 4
- Location: Canada
- Status:
Offline
Re: Looking for an adapter from M42 to a 2" eyepiece
yobbo89 wrote: ↑Fri Sep 27, 2019 5:17 am You'll have to post your setup when you get your adapter, will you be doing visual with it? I think i seen a pic or two online with a eyepiece on a camera lense, i wounder what it takes to get it into focus,, i wounder if a low profile adapter will be good for 2" adapter ccd/cmos cameras
Well, my adapter finally arrived and as promised I have some pictures to show. The adapter fits perfectly on to the Tele-lens, my first step was to verify
the original eyepiece which was the Orion Deep-View 35mm eyepiece and as expected it works perfect. No issues at all focusing it! I set the focus adjustment
on the Tele to midpoint and moved the 2" eyepiece further out to see my adjustment range - it works great lots of room.
Having done that I thought giving it a try with the 10mm Sirius Plossl eyepiece that came with my XT10i, this one I was holding by hand, since that is a 1.25" dia.,
and this one worked as well. I will make an aluminum adapter to fit this myself. This one is easy to machine since I don't have to deal with the M42 thread. I have a lathe,
but the M42 thread was the show stopper to make it myself from scratch.
My next step was to check the adapter and see how it will work with my T7C camera. Well - the camera works as well and I am thrilled to have found some good use
for the old Tele lens. I was testing the camera using SharpCap - works great!
Again - Thank You for pointing out the adapter!!!
Below are some pictures of the setup....
Orion XT10i custom, Orion GiantView BT-70, Bushnell Natureview 20-60x65, Barska 25-125x80
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
- yobbo89
- Moderator
- Articles: 0
- Posts: 2561
- Joined: Sat May 11, 2019 7:44 pm
- 4
- Location: australia qld brisbane
- Status:
Offline
-
TSS Photo of the Day
Re: Looking for an adapter from M42 to a 2" eyepiece
Very nice scope!,looks like a sturdy adapter.
Can your lathe not do metric 0.75 mm?
Can your lathe not do metric 0.75 mm?
scopes :gso/bintel f4 12"truss tube, bresser messier ar127s /skywatcher 10'' dob,meade 12'' f10 lx200 sct
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
cameras : asi 1600mm-c/asi1600mm-c,asi120mc,prostar lp guidecam, nikkon d60, sony a7,asi 290 mm
mounts : eq6 pro/eq8/mesu 200 v2
filters : 2'' astronomik lp/badder lrgb h-a,sII,oIII,h-b,Baader Solar Continuum, chroma 3nm ha,sii,oiii,nii,rgb,lowglow,uv/ir,Thousand Oaks Solar Filter,1.25'' #47 violet,pro planet 742 ir,pro planet 807 ir,pro planet 642 bp ir.
extras : skywatcher f4 aplanatic cc, Baader MPCC MKIII Coma Corrector,Orion Field Flattener,zwo 1.25''adc.starlight maxi 2" 9x filter wheel,tele vue 2x barlow .
- man1
- Moon Ambassador
- Articles: 0
- Posts: 74
- Joined: Mon Sep 09, 2019 7:58 am
- 4
- Location: Canada
- Status:
Offline
Re: Looking for an adapter from M42 to a 2" eyepiece
Yes, the lathe can do metric thread but I have to change the gears in it. The adapter is truly heavy duty and well made, it also uses a compression ring.
The 2" eyepiece is a beautiful snug fit.
Orion XT10i custom, Orion GiantView BT-70, Bushnell Natureview 20-60x65, Barska 25-125x80
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
SkySafari6 Pro & 7 Pro, SkyFi 3, ASI290MC, T7C
- JimMinCT
- Saturn Ambassador
- Articles: 0
- Posts: 393
- Joined: Tue May 07, 2019 10:24 pm
- 4
- Location: Ct
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Looking for an adapter from M42 to a 2" eyepiece
Very nice setup!
(I'm amazed at how many of us have lathes...)
Perhaps they should be listed in the equipment section along with the other pieces of kit...
Cheers
(I'm amazed at how many of us have lathes...)
Perhaps they should be listed in the equipment section along with the other pieces of kit...
Cheers
OTA's: Kson 1026-C, 4" Carbon Fiber ED Refractor, Home-built, 6.1", f/2.? APO refractor... (In Progress) 8" Meade LX2 SCT Mounts: CGX Imaging: ZWO ASI 1600MM, Canon 550D (T2i) Software: PixInsight, APT, PHD2, SharpCap, SGP, Stellarium, Registax, Stuff: Astro-Tech 0.8x FR/FF, Hotech SCA FF, ZWO 7nm 31mm LRGB-SHO filter set, ZWO 8 position EFWObsy: "Maybe Spaceship" Observatory
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute