Counterweight at the Visual Back
- XCalRocketMan
- Articles: 0
- Posts: 507
- Joined: Sun May 12, 2019 8:09 pm
- 4
- Location: Reisterstown, MD USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Counterweight at the Visual Back
Mounts AP1100GTO mount w/APCCpro; iOptron iEQ30 Pro; Criterion Dynamax-8 SCT
Lenses Hyperstar-III; Celestron 0.7x FR; WO Flat/Reducer 0.8x
Guiding Celestron OAG w/ASI174mm mini; WO 50mm; Orion ST80
Cameras and Filters ZWO2600mm Pro w/Optolong 3nm NB and RGB; ZWOASI1600mm Pro (ZWO LRGB and Astrodon Ha-5nm, Oiii-3nm, Sii-5nm), QHY10, Canon 50D; ASI174mm mini; ASI462MC; ASI120MC
Misc Moonlite focuser on Edge - Feather-Touch focuser on GT102; ZWO EAF on ZS61; ZWO 2" and 31mm FWs; Kendrick Dew System, Temp-est Fans
Software NINA; PHD; APT; BYE; PI; APP; PSP; Registax; FireCapture; SharpCap
Blog at: SkyAndRockets
- JayTee
- Articles: 2
- Posts: 5651
- Joined: Thu Apr 25, 2019 3:23 am
- 5
- Location: Idaho, USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Counterweight at the Visual Back
You can just see the counterweight inside the red circle that's what I use for both fore and aft and vertical and horizontal counterbalance. It's from ADM and it clamps to the Losmandy bar on the bottom of the
Here's another view.
∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO
∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5
∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros.
∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3
∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter
∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
- XCalRocketMan
- Articles: 0
- Posts: 507
- Joined: Sun May 12, 2019 8:09 pm
- 4
- Location: Reisterstown, MD USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Counterweight at the Visual Back
Mounts AP1100GTO mount w/APCCpro; iOptron iEQ30 Pro; Criterion Dynamax-8 SCT
Lenses Hyperstar-III; Celestron 0.7x FR; WO Flat/Reducer 0.8x
Guiding Celestron OAG w/ASI174mm mini; WO 50mm; Orion ST80
Cameras and Filters ZWO2600mm Pro w/Optolong 3nm NB and RGB; ZWOASI1600mm Pro (ZWO LRGB and Astrodon Ha-5nm, Oiii-3nm, Sii-5nm), QHY10, Canon 50D; ASI174mm mini; ASI462MC; ASI120MC
Misc Moonlite focuser on Edge - Feather-Touch focuser on GT102; ZWO EAF on ZS61; ZWO 2" and 31mm FWs; Kendrick Dew System, Temp-est Fans
Software NINA; PHD; APT; BYE; PI; APP; PSP; Registax; FireCapture; SharpCap
Blog at: SkyAndRockets
- JayTee
- Articles: 2
- Posts: 5651
- Joined: Thu Apr 25, 2019 3:23 am
- 5
- Location: Idaho, USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Counterweight at the Visual Back
I understand what you're asking for and I think it is a great idea, but I can't recall ever seeing anything like that. You may be able to fashion your own custom weight. A donut cutter used as a mold for melted lead might work. Or something similar to that. I have used tuna cans partially filled with melted lead to make custom lead weights in the past. I have used these as camera counterweights.
Cheers
∞ AP Scopes: #1: TPO 6" f/9 RC #2: ES 102 f/7 APO #3: ES 80mm f/6 APO
∞ G&G Scopes: #1: Meade 102mm f/7.8 #2: Bresser 102mm f/4.5
∞ Guide Scopes: 70 & 80mm fracs -- The El Cheapo Bros.
∞ Mounts: iOptron CEM70AG, SW EQ6R, Celestron AVX, SLT & GT (Alt-Az), Meade DS2000
∞ Cameras: #1: ZWO ASI294MC Pro #2: 662MC #3: 120MC, Canon T3i, Orion SSAG, WYZE Cam3
∞ Binos: 10X50,11X70,15X70, 25X100 ∞ AP Gear: ZWO EAF and mini EFW and the Optolong L-eXteme filter
∞ EPs: ES 2": 21mm 100° & 30mm 82° Pentax XW: 7, 10, 14, & 20mm 70°
Searching the skies since 1966. "I never met a scope I didn't want to keep."
- AstroBee Online
- Moderator
- Articles: 0
- Posts: 2326
- Joined: Thu Nov 14, 2019 11:03 pm
- 4
- Location: Henderson, NV
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
Re: Counterweight at the Visual Back
Scopes: Celestron EdgeHD14", Explore Scientific ED152CF & ED127 APO's, StellarVue SV70T, Classic Orange-Tube C-8, Lunt 80mm Ha double-stack solar scope.
Mounts: Astro-Physics Mach One, iOptron CEM70EC Mount, iOptron ZEQ25 Mount.
Cameras: ZWO ASI2600mm Pro, ZWO 2600MC Pro, ZWO ASI1600mm
Filters: 36mm Chroma LRGB & 3nm Ha, OIII, SII, L-Pro, L-eXtreme
Eyepieces: 27mm TeleVue Panoptic, 4mm TeleVue Radian, Explore Scientific 82° 30mm, 6.7mm , Baader 13mm Hyperion, Explore Scientific 70° 10mm, 15mm, 20mm, Meade 8.8mm UWA
Software: N.I.N.A., SharpCapPro, PixInsight, PhotoShop CC, Phd2, Stellarium
https://www.nevadadesertskies.com
- XCalRocketMan
- Articles: 0
- Posts: 507
- Joined: Sun May 12, 2019 8:09 pm
- 4
- Location: Reisterstown, MD USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Counterweight at the Visual Back
Yeah, I was going to do that and supply that info here, but I need to take my flats today before I remove the camera
But yes, the counterweight would need to be either the exact same weight, or adjustable some way since it might change the balance depending on where (Edge or GT102) it is placed.
Mounts AP1100GTO mount w/APCCpro; iOptron iEQ30 Pro; Criterion Dynamax-8 SCT
Lenses Hyperstar-III; Celestron 0.7x FR; WO Flat/Reducer 0.8x
Guiding Celestron OAG w/ASI174mm mini; WO 50mm; Orion ST80
Cameras and Filters ZWO2600mm Pro w/Optolong 3nm NB and RGB; ZWOASI1600mm Pro (ZWO LRGB and Astrodon Ha-5nm, Oiii-3nm, Sii-5nm), QHY10, Canon 50D; ASI174mm mini; ASI462MC; ASI120MC
Misc Moonlite focuser on Edge - Feather-Touch focuser on GT102; ZWO EAF on ZS61; ZWO 2" and 31mm FWs; Kendrick Dew System, Temp-est Fans
Software NINA; PHD; APT; BYE; PI; APP; PSP; Registax; FireCapture; SharpCap
Blog at: SkyAndRockets
- OzEclipse Online
- Moderator
- Articles: 2
- Posts: 2421
- Joined: Sat May 11, 2019 8:11 am
- 4
- Location: Young, NSW, Australia, 34S, 148E
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
Re: Counterweight at the Visual Back
This is a bit of a heath robinson solution. What about buying a camera coupling that fits both telescopes - T2 screw or 2" barrel - anything whatever you use but preferably flanged. Glue a piece of wood to that item with super strength epoxy and glue two small v blocks to that to make a saddle. In the saddle, place a pet bottle with water. The size of the bottle needs to be big enough to match you camera and the amount of water in the bottle can be adjusted in minute increments by draining or adding water to match your camera's exact weight.
Then you can rebalance the scope redo the model and just switch them around when required.
Joe
Amateur astronomer since 1978...................Web site : http://joe-cali.com/
Scopes: ATM 18" Dob, Vixen VC200L, ATM 6"f7, Stellarvue 102ED, Saxon ED80, WO M70 ED, Orion 102 Maksutov, ST80.
Mounts: Takahashi EM-200, iOptron iEQ45, Push dobsonian with Nexus DSC, three homemade EQ's.
Eyepieces: TV Naglers 31, 17, 12, 7; Denkmeier D21 & D14; Pentax XW10, XW5, Unitron 40mm Kellner, Meade Or 25,12
Cameras : Pentax K1, K5, K01, K10D / VIDEO CAMS : TacosBD, Lihmsec.
Cam/guider/controllers: Lacerta MGEN 3, SW Synguider, Simulation Curriculum SkyFi 3+Sky safari
Memberships Astronomical Association of Queensland; RASNZ Occultations Section; Single Exposure Milky Way Facebook Group (Moderator) (12k members), The Sky Searchers (moderator)
- AstroBee Online
- Moderator
- Articles: 0
- Posts: 2326
- Joined: Thu Nov 14, 2019 11:03 pm
- 4
- Location: Henderson, NV
- Status:
Online
-
TSS Awards Badges
TSS Photo of the Day
Re: Counterweight at the Visual Back
^^ genius!OzEclipse wrote: ↑Sat Aug 07, 2021 3:31 am Mikey,
This is a bit of a heath robinson solution. What about buying a camera coupling that fits both telescopes - T2 screw or 2" barrel - anything whatever you use but preferably flanged. Glue a piece of wood to that item with super strength epoxy and glue two small v blocks to that to make a saddle. In the saddle, place a pet bottle with water. The size of the bottle needs to be big enough to match you camera and the amount of water in the bottle can be adjusted in minute increments by draining or adding water to match your camera's exact weight.
Then you can rebalance the scope redo the model and just switch them around when required.
Joe
Scopes: Celestron EdgeHD14", Explore Scientific ED152CF & ED127 APO's, StellarVue SV70T, Classic Orange-Tube C-8, Lunt 80mm Ha double-stack solar scope.
Mounts: Astro-Physics Mach One, iOptron CEM70EC Mount, iOptron ZEQ25 Mount.
Cameras: ZWO ASI2600mm Pro, ZWO 2600MC Pro, ZWO ASI1600mm
Filters: 36mm Chroma LRGB & 3nm Ha, OIII, SII, L-Pro, L-eXtreme
Eyepieces: 27mm TeleVue Panoptic, 4mm TeleVue Radian, Explore Scientific 82° 30mm, 6.7mm , Baader 13mm Hyperion, Explore Scientific 70° 10mm, 15mm, 20mm, Meade 8.8mm UWA
Software: N.I.N.A., SharpCapPro, PixInsight, PhotoShop CC, Phd2, Stellarium
https://www.nevadadesertskies.com
- XCalRocketMan
- Articles: 0
- Posts: 507
- Joined: Sun May 12, 2019 8:09 pm
- 4
- Location: Reisterstown, MD USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Counterweight at the Visual Back
Wow, what a great idea. Thanks!!! I'll need to see if the geometry of my scope setup would allow this to be a practical solution.AstroBee wrote: ↑Sat Aug 07, 2021 5:01 pm^^ genius!OzEclipse wrote: ↑Sat Aug 07, 2021 3:31 am Mikey,
This is a bit of a heath robinson solution. What about buying a camera coupling that fits both telescopes - T2 screw or 2" barrel - anything whatever you use but preferably flanged. Glue a piece of wood to that item with super strength epoxy and glue two small v blocks to that to make a saddle. In the saddle, place a pet bottle with water. The size of the bottle needs to be big enough to match you camera and the amount of water in the bottle can be adjusted in minute increments by draining or adding water to match your camera's exact weight.
Then you can rebalance the scope redo the model and just switch them around when required.
Joe
Mounts AP1100GTO mount w/APCCpro; iOptron iEQ30 Pro; Criterion Dynamax-8 SCT
Lenses Hyperstar-III; Celestron 0.7x FR; WO Flat/Reducer 0.8x
Guiding Celestron OAG w/ASI174mm mini; WO 50mm; Orion ST80
Cameras and Filters ZWO2600mm Pro w/Optolong 3nm NB and RGB; ZWOASI1600mm Pro (ZWO LRGB and Astrodon Ha-5nm, Oiii-3nm, Sii-5nm), QHY10, Canon 50D; ASI174mm mini; ASI462MC; ASI120MC
Misc Moonlite focuser on Edge - Feather-Touch focuser on GT102; ZWO EAF on ZS61; ZWO 2" and 31mm FWs; Kendrick Dew System, Temp-est Fans
Software NINA; PHD; APT; BYE; PI; APP; PSP; Registax; FireCapture; SharpCap
Blog at: SkyAndRockets
- John Fitzgerald
- Articles: 0
- Posts: 211
- Joined: Mon Nov 11, 2019 12:04 am
- 4
- Location: Arkansas
- Status:
Offline
-
TSS Awards Badges
Re: Counterweight at the Visual Back
No good deed goes unpunished.
- XCalRocketMan
- Articles: 0
- Posts: 507
- Joined: Sun May 12, 2019 8:09 pm
- 4
- Location: Reisterstown, MD USA
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: Counterweight at the Visual Back
Mounts AP1100GTO mount w/APCCpro; iOptron iEQ30 Pro; Criterion Dynamax-8 SCT
Lenses Hyperstar-III; Celestron 0.7x FR; WO Flat/Reducer 0.8x
Guiding Celestron OAG w/ASI174mm mini; WO 50mm; Orion ST80
Cameras and Filters ZWO2600mm Pro w/Optolong 3nm NB and RGB; ZWOASI1600mm Pro (ZWO LRGB and Astrodon Ha-5nm, Oiii-3nm, Sii-5nm), QHY10, Canon 50D; ASI174mm mini; ASI462MC; ASI120MC
Misc Moonlite focuser on Edge - Feather-Touch focuser on GT102; ZWO EAF on ZS61; ZWO 2" and 31mm FWs; Kendrick Dew System, Temp-est Fans
Software NINA; PHD; APT; BYE; PI; APP; PSP; Registax; FireCapture; SharpCap
Blog at: SkyAndRockets
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute