How Do You Clean Your Diagonal?
-
- Articles: 0
- Posts: 1493
- Joined: Sun May 12, 2019 1:05 am
- 4
- Status:
Offline
-
TSS Awards Badges
How Do You Clean Your Diagonal?
- Bigzmey Online
- Moderator
- Articles: 8
- Posts: 7724
- Joined: Sat May 11, 2019 7:55 pm
- 4
- Location: San Diego, CA USA
- Status:
Online
-
TSS Awards Badges
Re: How Do You Clean Your Diagonal?
On my other optics (EPs, photo lenses) I do use Ziess lens wipes without any issues.
Mounts: SW: SkyTee2, AzGTi; iOptron: AZMP; ES: Twilight I; Bresser: EXOS2; UA: MicroStar.
Binos: APM: 100-90 APO; Canon: IS 15x50; Orion: Binoviewer, LG II 15x70, WV 10x50, Nikon: AE 16x50, 10x50, 8x40.
EPs: Pentax: XWs & XFs; TeleVue: Delites, Delos, Panoptic & Plossls; ES: 68, 62; Vixen: SLVs; Baader: BCOs, Aspherics, Mark IV.
Diagonals: Baader: BBHS mirror, Zeiss Spec T2 prism, Clicklock dielectric; TeleVue: Evebrite dielectric; AltairAstro: 2" prism.
Filters: Lumicon: DeepSky, UHC, OIII, H-beta; Baader: Moon & SkyGlow, Contrast Booster, UHC-S, 6-color set; Astronomik: UHC.
Solar: HA: Lunt 50mm single stack, W/L: Meade Herschel wedge.
Observing: DSOs: 3106 (Completed: Messier, Herschel 1, 2, 3. In progress: H2,500: 2180, S110: 77). Doubles: 2461, Comets: 34, Asteroids: 261
- Thefatkitty Online
- Co-Administrator
- Articles: 0
- Posts: 4328
- Joined: Sat May 11, 2019 4:20 pm
- 4
- Location: Ontario, Canada
- Status:
Online
-
TSS Photo of the Day
TSS Awards Badges
Re: How Do You Clean Your Diagonal?
When I got the C80, all was good except for the above diagonal. I took it apart and discover in addition to the hazy film on the prism, the black velvet underneath it had literally gone grey with age
I washed the prism the same way I would a newtonian mirror. Distilled water with some dish soap, a gentle wipe with a cotton ball, and a rinse off with distilled water as well. I replaced the old black velvet with a new piece my wife had in the sewing box. What a difference!
No need to clean my iOptron as I've only had it for a year and a bit. But it may never need cleaning, as the star diagonal gives a darker background and a slightly wider field of view, and hence sees the most use. I know it just has a thumbscrew instead of a compression ring, but my KK's and others are for life, so a few marks on the barrels just means to me "battle-scars"...
I try to clean optics as little as possible. I keep dust covers on scopes, and lenses with caps in cases. Still, poop happens...
All the best,
"The Hankmeister" Celestron 8SE, orange tube Vixen made C80, CG4, AZ-EQ5 and SolarQuest mounts.
Too much Towa glass/mirrors.
Solar:
H/A - PST stage 2 mod with a Baader 90mm ERF on a Celestron XLT 102 (thanks Mike!)
Ca-K - W/O 61mm, Antares 1.6 barlow, Baader 3.8 OD and Ca-K filters with a ZWO ASI174mm.
W/L - C80-HD with Baader 5.0 & 3.8 Solar film, Solar Continuum 7.5nm and UV/IR filters with a Canon EOS 550D.
Member of the RASC
- Lady Fraktor
- Articles: 0
- Posts: 10022
- Joined: Mon Apr 29, 2019 9:14 pm
- 5
- Location: Slovakia
- Status:
Offline
Re: How Do You Clean Your Diagonal?
I clean all of my diagonals once a year using a bulb blower and Zeiss wipes and a microfiber cloth if needed.
Mirrors and prisms are removed from the body and cleaned as well as the case being thoroughly cleaned and checked for paint chips and such.
After cleaning they are checked for alignment with a laser.
Eyepieces are kept capped and in their cases as well and cleaned as required.
I have some with very short eye relief and need to be cleaned after every use.
See Far Sticks: Elita 103/1575, AOM FLT 105/1000, Bresser 127/1200 BV, Nočný stopár 152/1200, Vyrobené doma 70/700, Stellarvue NHNG DX 80/552, TAL RS 100/1000, Vixen SD115s/885
EQ: TAL MT-1, Vixen SXP, SXP2, AXJ, AXD
Az/Alt: AYO Digi II, Stellarvue M2C, Argo Navis encoders on both
Tripods: Berlebach Planet (2), Uni 28 Astro, Report 372, TAL factory maple, Vixen ASG-CB90, Vixen AXD-TR102
Diagonals: Astro-Physics, Baader Amici, Baader Herschel, iStar Blue, Stellarvue DX, Tak prism, TAL, Vixen
Eyepieces: Antares to Zeiss (1000101)
The only culture I have is from yogurt
-
- Articles: 0
- Posts: 1493
- Joined: Sun May 12, 2019 1:05 am
- 4
- Status:
Offline
-
TSS Awards Badges
Re: How Do You Clean Your Diagonal?
I was thinking exactly what you do. After every observation use the bulb blower and put the caps back on. Would like a bit more information on diagonal alignment please.Lady Fraktor wrote: ↑Thu Jul 09, 2020 3:45 am I guess I am the odd person as usual
I clean all of my diagonals once a year using a bulb blower and Zeiss wipes and a microfiber cloth if needed.
Mirrors and prisms are removed from the body and cleaned as well as the case being thoroughly cleaned and checked for paint chips and such.
After cleaning they are checked for alignment with a laser.
Eyepieces are kept capped and in their cases as well and cleaned as required.
I have some with very short eye relief and need to be cleaned after every use.
- pakarinen
- Articles: 0
- Posts: 4038
- Joined: Fri Jun 14, 2019 3:33 pm
- 4
- Location: NE Illinois
- Status:
Offline
-
TSS Awards Badges
Re: How Do You Clean Your Diagonal?
OTOH, all my dgnls cost under $100. (I also have an original Celestron that came with my vintage C8 decades ago).
Man... That's some icky-tasting stuff!
=============================================================================
AT50, AT72EDII, ST80, ST102; Scopetech Zero, AZ-GTi, AZ Pronto; Innorel RT90C, Oberwerk 5000; Orion Giantview 15x70s, Vortex 8x42s, Navy surplus 7x50s, Nikon 10x50s
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute