My main problem is that sometimes it connects to SharpCap properly. Sometimes it does not.
When it connects properly, I can set a time for exposure (and for all the other stuff) and Start Capture. It works well.
But most of the time, I set a time for exposure and the program does this weird thing. Let's say I set for 60s exposure. Well, once the counter reaches 60 seconds, it does NOT start over again. It keeps going... and going... and going... It will for a whole hour if I let it go. So when I push the Start Capture button and "start" (asking, for instance, only 1 capture), no file is downloaded after 60s or after 120s or after 10 minutes... So I have to press STOP CAPTURE. Then it tells me: you have interrupted your capture. After I pull out what little hair I have left, I close the program and start from scratch.
I usually have to do this about five or six times every night before I finally get "normal" operation where I can start capture and get my 60s light frames.
Any ideas ???
I sold the farm to get this camera... OK, not a farm but lots of my telescope equipment, including my favorite scope (the Meade 102mm
No totally disappointed but not entirely happy either.
BABO