12 inch binoscope project
- AdriGlassPusher
- Earth Ambassador
- Articles: 0
- Posts: 9
- Joined: Fri Aug 30, 2019 6:27 pm
- 4
- Location: Croatia
- Status:
Offline
12 inch binoscope project
Greetings,
This is a project I have been working on recently, a binocular telescope with twin 12 inch mirrors. I got an idea to build myself a big binocular telescope after visiting few very pristine dark sky locations and realizing that i Prefer binocular viewing. I love wide fields of view and colorful images of stars large exit pupils provide, hence binoviewer is something I didnt consider. Perhaps if I build a long focus newtonian for planetary use I will consider binoviewers.
I dont have an access to either a tig welder or an oxyacetylene burner so all connections are screw based. But the frame is pretty stiff and at least the base will be heavier due to all these screws thus helping the balancing thing. I also left the trusses oversized because I have a tendency to miss the focus point, which happened on couple of my previous builds.
Anyway, here is the current state of the project.
This is a project I have been working on recently, a binocular telescope with twin 12 inch mirrors. I got an idea to build myself a big binocular telescope after visiting few very pristine dark sky locations and realizing that i Prefer binocular viewing. I love wide fields of view and colorful images of stars large exit pupils provide, hence binoviewer is something I didnt consider. Perhaps if I build a long focus newtonian for planetary use I will consider binoviewers.
I dont have an access to either a tig welder or an oxyacetylene burner so all connections are screw based. But the frame is pretty stiff and at least the base will be heavier due to all these screws thus helping the balancing thing. I also left the trusses oversized because I have a tendency to miss the focus point, which happened on couple of my previous builds.
Anyway, here is the current state of the project.
- KingClinton
- Local Group Ambassador
- Articles: 0
- Posts: 2258
- Joined: Sat Apr 27, 2019 4:45 pm
- 5
- Location: Durban, South Africa.
- Status:
Offline
-
TSS Photo of the Day
Re: 12 inch binoscope project
Looks like a awesome project. Please keep us updated on your progress.
That scope will deliver amazing views.
That scope will deliver amazing views.
- StarBru
- Orion Spur Ambassador
- Articles: 0
- Posts: 662
- Joined: Mon May 13, 2019 1:53 am
- 4
- Location: Arizona, USA
- Status:
Offline
-
TSS Awards Badges
Re: 12 inch binoscope project
Love that ATM stuff! Good luck and I can't wait to see the end product! Keep us informed with lots of pictures!!!!
Bruce
Refractors: Meade AR-5 127mm f/9.3, Meade ST-80 f/5 and Meade 60mm f/12, Jason 60mm f/15 #313, Jason 60mm f/12 #306 S7, Bushnell Sky Chief III 60mm f/15.
Reflectors/Catadioptrics: Meade 10" F/4 Schmidt-Newtonian, Galileo 120mm f/8.3 Newtonian, Meade 2045D 4" f/10 SCT, Meade ETX-90EC f/13.8 & Sarblue 60mm f/12.5 Maksutov-Cassegrains.
Mounts: Skywatcher EQ6-R Pro & Meade LXD55 Equatorial mounts, ES Twilight II and Meade 2102 ALT/AZ mounts, a modified 10" SkyQuest Dobsonian mount, various 60mm EQ mounts.
Misc: Celestron 20x80mm binoculars, Revolution II Imager/accessories, & lots of optical accessories/eyepieces.
Projects: 8" f/2.9 and 65mm f/10 reflectors, Dobson-style binocular mirror mount.
Refractors: Meade AR-5 127mm f/9.3, Meade ST-80 f/5 and Meade 60mm f/12, Jason 60mm f/15 #313, Jason 60mm f/12 #306 S7, Bushnell Sky Chief III 60mm f/15.
Reflectors/Catadioptrics: Meade 10" F/4 Schmidt-Newtonian, Galileo 120mm f/8.3 Newtonian, Meade 2045D 4" f/10 SCT, Meade ETX-90EC f/13.8 & Sarblue 60mm f/12.5 Maksutov-Cassegrains.
Mounts: Skywatcher EQ6-R Pro & Meade LXD55 Equatorial mounts, ES Twilight II and Meade 2102 ALT/AZ mounts, a modified 10" SkyQuest Dobsonian mount, various 60mm EQ mounts.
Misc: Celestron 20x80mm binoculars, Revolution II Imager/accessories, & lots of optical accessories/eyepieces.
Projects: 8" f/2.9 and 65mm f/10 reflectors, Dobson-style binocular mirror mount.
- helicon
- Co-Administrator
- Articles: 592
- Posts: 12372
- Joined: Mon May 06, 2019 1:35 pm
- 4
- Location: Washington
- Status:
Online
-
TSS Awards Badges
Re: 12 inch binoscope project
Lookin' good! Don't forget to provide updates on the project.
-Michael
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
- Kanadalainen
- Milky Way Ambassador
- Articles: 0
- Posts: 1849
- Joined: Sat May 11, 2019 8:05 pm
- 4
- Location: Winnipeg, Canada
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: 12 inch binoscope project
I love this initiative, looks great so far.
I
I
Ian
Fracs: Stellarvue 70T f6; SW 120mm Esprit f7; "Mark Mk. II" - 60 mm Tasco f6; C80 frac f 11.4
SCT: C8 Edge f10 or f7 with reducer
Dob: 14.5" homebuilt strut dob (f4.5 ZOC mirror), Nexus II, Moonlite focuser
Mounts - Ioptron Skyguider pro, Astro Physics GTO900
Cameras and lenses - ZWO 2600 mc, 290 mm mini, Canon 60D modded with Rokinon 10mm 2.8; Rokinon 135mm f2
Skysafari 6 Pro, Astro Pixel Processor, Pixinsight - using Mac tablet and ASIair pro to run the AP rig.
"Mothers! It is there!" - Rafael Gonzales-Acuna, 2018.
Fracs: Stellarvue 70T f6; SW 120mm Esprit f7; "Mark Mk. II" - 60 mm Tasco f6; C80 frac f 11.4
SCT: C8 Edge f10 or f7 with reducer
Dob: 14.5" homebuilt strut dob (f4.5 ZOC mirror), Nexus II, Moonlite focuser
Mounts - Ioptron Skyguider pro, Astro Physics GTO900
Cameras and lenses - ZWO 2600 mc, 290 mm mini, Canon 60D modded with Rokinon 10mm 2.8; Rokinon 135mm f2
Skysafari 6 Pro, Astro Pixel Processor, Pixinsight - using Mac tablet and ASIair pro to run the AP rig.
"Mothers! It is there!" - Rafael Gonzales-Acuna, 2018.
- SkyHiker
- Local Group Ambassador
- Articles: 0
- Posts: 2293
- Joined: Sat May 11, 2019 8:40 pm
- 4
- Location: Santa Barbara, CA
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: 12 inch binoscope project
Great project!
I was wondering, why not put two 12" Meade truss Dobsonians in a frame with a diagonal for each 2" eyepiece? I presume the focus might not be far enough out without shortening the trusses, and the secondaries are too small after doing that. But, if that could be done, would it not save a lot of work?
Good luck with your project and keep us posted please!
I was wondering, why not put two 12" Meade truss Dobsonians in a frame with a diagonal for each 2" eyepiece? I presume the focus might not be far enough out without shortening the trusses, and the secondaries are too small after doing that. But, if that could be done, would it not save a lot of work?
Good luck with your project and keep us posted please!
... Henk. Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
- Kanadalainen
- Milky Way Ambassador
- Articles: 0
- Posts: 1849
- Joined: Sat May 11, 2019 8:05 pm
- 4
- Location: Winnipeg, Canada
- Status:
Offline
-
TSS Awards Badges
TSS Photo of the Day
Re: 12 inch binoscope project
SkyHiker wrote: ↑Wed Jun 17, 2020 10:46 pm Great project!
I was wondering, why not put two 12" Meade truss Dobsonians in a frame with a diagonal for each 2" eyepiece? I presume the focus might not be far enough out without shortening the trusses, and the secondaries are too small after doing that. But, if that could be done, would it not save a lot of work?
Good luck with your project and keep us posted please!
Good idea! I like this.
hmmmmm.....
Ian
Fracs: Stellarvue 70T f6; SW 120mm Esprit f7; "Mark Mk. II" - 60 mm Tasco f6; C80 frac f 11.4
SCT: C8 Edge f10 or f7 with reducer
Dob: 14.5" homebuilt strut dob (f4.5 ZOC mirror), Nexus II, Moonlite focuser
Mounts - Ioptron Skyguider pro, Astro Physics GTO900
Cameras and lenses - ZWO 2600 mc, 290 mm mini, Canon 60D modded with Rokinon 10mm 2.8; Rokinon 135mm f2
Skysafari 6 Pro, Astro Pixel Processor, Pixinsight - using Mac tablet and ASIair pro to run the AP rig.
"Mothers! It is there!" - Rafael Gonzales-Acuna, 2018.
Fracs: Stellarvue 70T f6; SW 120mm Esprit f7; "Mark Mk. II" - 60 mm Tasco f6; C80 frac f 11.4
SCT: C8 Edge f10 or f7 with reducer
Dob: 14.5" homebuilt strut dob (f4.5 ZOC mirror), Nexus II, Moonlite focuser
Mounts - Ioptron Skyguider pro, Astro Physics GTO900
Cameras and lenses - ZWO 2600 mc, 290 mm mini, Canon 60D modded with Rokinon 10mm 2.8; Rokinon 135mm f2
Skysafari 6 Pro, Astro Pixel Processor, Pixinsight - using Mac tablet and ASIair pro to run the AP rig.
"Mothers! It is there!" - Rafael Gonzales-Acuna, 2018.
- SkyHiker
- Local Group Ambassador
- Articles: 0
- Posts: 2293
- Joined: Sat May 11, 2019 8:40 pm
- 4
- Location: Santa Barbara, CA
- Status:
Offline
-
TSS Photo of the Day
TSS Awards Badges
Re: 12 inch binoscope project
This is what I had in mind, a binoscope made of 2 Dobs on an EQ platform. This link has all the details, HTH,
http://www.jerryoltion.com/binoscope.htm
http://www.jerryoltion.com/binoscope.htm
... Henk. Telescopes: GSO 12" Astrograph, "Comet Hunter" MN152, ES ED127CF, ES ED80, WO Redcat51, Z12, AT6RC, Celestron Skymaster 20x80, Mounts and tripod: Losmandy G11S with OnStep, AVX, Tiltall, Cameras: ASI2600MC, ASI2600MM, ASI120 mini, Fuji X-a1, Canon XSi, T6, ELPH 100HS, DIY: OnStep controller, Pi4b/power rig, Afocal adapter, Foldable Dob base, Az/Alt Dob setting circles, Accessories: ZWO 36 mm filter wheel, TV Paracorr 2, Baader MPCC Mk III, ES FF, SSAG, QHY OAG-M, EAF electronic focuser, Plossls, Barlows, Telrad, Laser collimators (Seben LK1, Z12, Howie Glatter), Cheshire, 2 Orion RACIs 8x50, Software: KStars-Ekos, DSS, PHD2, Nebulosity, Photo Gallery, Gimp, CHDK, Computers:Pi4b, 2x running KStars/Ekos, Toshiba Satellite 17", Website:Henk's astro images
- helicon
- Co-Administrator
- Articles: 592
- Posts: 12372
- Joined: Mon May 06, 2019 1:35 pm
- 4
- Location: Washington
- Status:
Online
-
TSS Awards Badges
Re: 12 inch binoscope project
Thanks for passing on the link Henk. Mr. Oltion has crafted a number of amazing scopes!SkyHiker wrote: ↑Sat Aug 01, 2020 5:41 pm This is what I had in mind, a binoscope made of 2 Dobs on an EQ platform. This link has all the details, HTH,
http://www.jerryoltion.com/binoscope.htm
-Michael
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
Refractors: ES AR152 f/6.5 Achromat on Twilight II, Celestron 102mm XLT f/9.8 on Celestron Heavy Duty Alt Az mount, KOWA 90mm spotting scope
Binoculars: Celestron SkyMaster 15x70, Bushnell 10x50
Eyepieces: Various, GSO Superview, 9mm Plossl, Celestron 25mm Plossl
Camera: ZWO ASI 120
Naked Eye: Two Eyeballs
Latitude: 48.7229° N
Create an account or sign in to join the discussion
You need to be a member in order to post a reply
Create an account
Not a member? register to join our community
Members can start their own topics & subscribe to topics
It’s free and only takes a minute