One of the members at SLOOH created an auto script "autointegrate.js" to automatically process SLOOH fits files using PIXINSIGHT (
The program and info can be found at https://ruuth.xyz/AutoIntegrateInfo.html
AUTOINTEGRATE
INFO
Overview
AutoIntegrate is a PixInsight script to process FITS and other image files and run a basic image processing workflow to create a final image. Script has a GUI interface where some processing options can be selected. AutoIntegrate can do the whole image processing workflow including image calibration.
After running the script there will be integrated light images and automatically processed final image. LRGB, color/
Files accepted by the script
Script accepts all files that are supported by PixInsight. It can be used with FITS files from telescopes, or RAW files from
Calibrated files from remote telescope systems like Telescope Live, iTelescope, Slooh and Deep Sky West have been tested and they work fine.
When using RAW or
How the script automatically recognizes different files
First script checks if the file has a FILTER keyword that specifies the image as Luminance, Red, Green, Blue,
If the FILTER keyword is not found then files that end with _L, _R, _G, _B, _H, _S, _O or _C are treated as filter files. For example ngc6514_R.fit is treated as a Red filter file.
Otherwise files are assumed to be color files.
If IMAGETYP keyword is set on files script can automatically detect bias, dark and flat calibration files when adding light files. Also flat dark files are recognized with a special value 'flat dark'.
Adding filter files manually
If automatic detection of the FILTER keyword does not correctly recognize the filter type, it is possible to manually add files for each filter. This can be enabled by checking 'Add manually' or 'Do not use FILTER keyword’ boxes.
There are separate buttons for each filter type recognized by the script. Also color/
Running the script
Steps to run the script
Open Script Editor in PixInsight
Open file AutoIntegrate.js
Press F9 to run the script in the editor
Add files with Add buttons
Click Run and wait until the script completes
Erik Westermann has written more detailed instructions in his blog article PixInsight AutoIntegrate.js Processing Script