Login:


Statistics

Who is online:
Registered users: 515bonner, ampegboy1, AntennaGuy, Baurice, Bigzmey, Bing [Bot], Dragonsfire, frans, Google [Bot], Gordon, Jockinireland, John Baars, KathyNS, kt4hx, Majestic-12 [Bot], Nakedgun, OzEclipse, Quinny, Semrush [Bot], Sky, StarHugger, STEVE333, Stevegeo, ThinkerX, Unitron48

Total members 2836
Our newest member ramonapineda1996

Thanks to our Supporters!

Articles

BASIC SOLAR PROCESSING

by Lowjiber

Solar processing is a combination of basic principles mixed with art and a little voodoo thrown in for good measure. In this tutorial, we are going to look at the basic process of getting an image from the camera to a finished “product”… A JPEG image that is sized properly for display on the web.

CAPTURE
The vast majority of solar imagers use a monochrome cam. The image(s) used here were captured as AVI files with an ASI174MM-cooled monochrome camera. There are two methods used to produce an image with a surface and any accompanying prominences… A single capture of the surface only, or two separate shots that are combined during processing. We are going to use the latter, as it is the most common method and provides an opportunity to work the two images independently before combining.

STACKING
When an AVI file is captured, it is nothing more that a series of individual frames (usually 1000)… some are good while some are not due to a myriad of reasons. We need a method of figuring out which frames are the best and putting them “stacked” to have a resultant TIFF file that we can process.

There are several applications that can stack our AVI files, but the most common is Autostakkert (AS!3) by Emil Kraaikamp. It is free software, and I won’t go into a tutorial on how to use it as there are plenty available on the web.

Let us look at our two images after stacking with Autostakkert…



Not overly impressive, huh? The prom image was captured at a much higher exposure which caused a lot of noise in the atmosphere, whereas the surface has a much cleaner background. We’ll fix that next.

CLEANING UP THE IMAGES

Both of our stacked images need to have their histogram adjusted and some sort of process applied that will bring out or details to the point where we can be confident that we are on the right track. The two most common software applications that can do that are Registax & IMPPG… Both are free.

Registax allows for minor histogram adjustment and does the detail enhancement via a “Wavelet” adjustment of six levels of detail. It also provides sharpening, but it is very subjective… If you decide to sharpen when using Registax, you can do it later with other software.

IMPPG provides an excellent way to adjust the histogram and brings out those delicious details via a Lucy/Richardson Deconvolution routine that is far superior to the Wavelets adjustment in Registax.

There are plenty of tutorials on-line for using both Registax and IMPPG, so we will not waste the time here. Here are our two stacked images after a pass through IMPPG…

Notice the difference? The prom image has almost all its atmosphere cleaned up and the details are orders-of-magnitude better in both images. We’ll make even more improvements in our next step.

There are at least a dozen photo processing applications available on the market… Adobe Essentials, CorelDRAW, and PaintShop Pro just to name a few. However, by far, the most popular for our application are GIMP and Photoshop. I use Photoshop CC 2020 and will take you through the steps without trying to “give you a lesson” on how to use Photoshop. The key is to recognize the concepts, not how to use your particular software.

I do take advantage of several “plug-ins” in Photoshop, most notably Topaz Labs, but will not use any of them in the following demonstration.

PHOTOSHOP

We will get started by bringing both of our monochrome TIFF images into PS. We will do the prom image first and get it ready to accept our processed surface when it too is ready.

For convenience down-the-road, we are going to change the Mode from grayscale to RGB Color and save both images. (Image>Mode>RGB Color, 16Bits/Channel) You may be thinking, “Why not wait until later?” Because we are going to take advantage of temporary color to make us aware of minute things that are not always obvious in grayscale.

The Prom Image…

First off, we will deal with that light artifact in the upper right corner. Just take a soft brush (~300 px) and set the color, using the eyedropper tool, to same color (black) as the area outside the offending area and paint it away. Easy.

A word about Color before going forward. I mentioned that we will use color, not only for the final image, but to help with processing. There are many methods of coloring an image, we are going to use Color Balance for this demonstration. Here are the Color Balance settings that we will use every time, all the way to the final product…

It may seem tedious to set nine values every time you want to add color. However, Photoshop will let you “record” an Action that will apply those values to a Color Balance Layer with one click of the mouse.

Apply a Color Balance layer at the top of your prom Layer stack. That will reveal that there are some slightly over-exposed areas in-and-around your proms. We want to get rid of most of that. Some is okay as proms usually have a small amount of ionized gas around them anyway, but we need to get rid of any excess. We will do that with a Curves Layer just above our Color Balance layer that is stacked atop our image.

It may not be obvious in the two screenshots below, but the difference will be obvious when you are doing your own prom image. It is easier to see the difference by comparing the “twisted” prom at the bottom of the image.

Now, disable the Color Balance Layer by clicking the eyeball off, or simply delete that layer entirely. Leave the Curves Layer in place and flatten the image.

SHARPENING

Simply stated, sharpening is nothing more that adjusting the contrast of an image. There are as many techniques to sharpen as there are stars in the sky. Most techniques, when applied aggressively, will result in some residual noise… There is an eternal argument if one should denoise beforehand or not, and many sharpening routines include a variable denoise function. I caution the reader to avoid over-sharpening, especially with proms. Proms are generally willowy and overdoing it can ruin an otherwise fine capture.

This image did not really need any sharpening, but I’m going to walk you through a method that will sharpen proms quite well with zero noise. It is called a High Pass Filter. Here is how…

I assume you flattened your image as pointed out above. This is important… Make a Background Copy just above your flattened image. We will apply the filter to that layer, and if you’ve “over-cranked” it you can always delete that background copy layer and try it again.

Working with the Background Copy active, go to Filter>Other>High Pass. When the dialog box opens set the Radius to 1.3 pixels and press “OK”. Now, set the blend mode of the Background copy to either Overlay or Soft Light. (I prefer Soft Light for proms.) Be gentle with the Radius settings… A number between 0.8 & 1.5 will suffice for most prom shots.

If it is not what you want, simply delete the Background Copy layer and start again. Note: Savvy PS users would point out that making the Background Copy layer a Smart Object would save a few steps, but this is not the place to discuss such things.

DENOISE

Much like sharpening, a little goes a long way when applying a denoise filter to a prom image. A little noise is most often a good thing when it comes to proms. So again, be gentle.

I will assume you have a background copy that you have already sharpened. If so, it is time to flatten the image leaving only a background layer that now contains your sharpening. Next, make another Background Copy Layer directly above the flattened Background layer.

Now, we are going to open the Reduce Noise filter’s dialog box… Filter>Noise>Reduce Noise. This filter will operate on your background copy just like the High Pass Filter did previously. Here is the box…

Those settings are pretty common for a prom image. Reduce Color Noise does not really matter with a monochrome image. I will bring your attention to the Sharpen Details slider. It does allow the user to sharpen the image somewhat, but we have already done all the sharpening we wanted to do, so we will leave it at 0%... Experiment. Remove JPEG Artifact is not needed since we are working with a TIFF image.

Once you have it where you want it, press “OK” and the operation will be applied to your background copy. You can then go ahead and flatten your two-layer image and you are done with the prom for a while.

The Surface Image…

Since some may not be accustomed to all this talk about layers and other such terms that I have been throwing around, I thought it might be helpful to show my stack when working the surface. Here is where it is right now…